BAS16WT1G

BAS16WT1G is a variant of the BAS16 family: a small‑signal, fast‑switching diode used for high‑speed switching and light rectification in low‑current circuits (SMT package; part of the BAS16 line).
Key points (vendor/spec may vary):
- Typical reverse voltage (Vr): about 75 V
- Continuous forward current (If): around 150–200 mA
- Forward voltage (Vf): ~0.7 V at modest current
- Switching speed: tens of nanoseconds (fast recovery)
- Power/thermal: suitable for low-power, surface-mount use
Packaging:
- WT1G usually denotes a specific SMT package/reel option (tape-and-reel). Check the exact package type and reel code in the manufacturer’s datasheet.
Applications:
- High‑speed signaling, demodulation, clamping, protection around logic circuits, and general small‑signal switching.
Note:
- Exact electrical, thermal, and package details depend on the vendor. Always consult the specific datasheet for BAS16WT1G from the supplier to confirm Vr, If, Vf, trr, and packaging.

Direct equivalents: BAS16 (same part from other manufacturers such as Nexperia, Diodes Inc., ROHM). Common substitutes with similar small‑signal switching characteristics: 1N4148 / LL4148 (SMD variants), BAV99, and BAW56. Verify package (SOD/SOT variant), reverse voltage, forward current and switching speed before substituting.

Features of BAS16WT1G
- Fast-switching, general-purpose small-signal diode (BAS16 family)
- Reverse voltage (VRRM) typical around 75 V
- Forward current (IF(AV)) up to ~150 mA
- Very fast reverse-recovery time (ns range) for high-speed switching
- Low forward voltage drop at small currents
- Low reverse leakage
- Surface-mount, Pb-free/RoHS-compliant package
- Wide operating temperature range (-55°C to +125°C)
- Suitable for high-speed switching, rectification, clamping, and logic circuits

- Pin count: 2 pins (anode and cathode)
- Function: fast-switching, general-purpose small-signal diode (BAS16 family) for high-speed switching and small-signal rectification in circuits.

Applications: General-purpose fast-switching diode for surface-mount circuits. Used in:
- High-speed switching in digital/logic paths
- RF demodulation and envelope detection
- Small-signal rectification and peak detectors
- Clipping, clamping, and limiter networks
- Input/polarity protection and level shifting for ICs
- Pulse-shaping networks
Note: BAS16WT1G is a fast small-signal diode in an SMD package, suitable for low-current, high-speed applications in telecom and consumer electronics.

BAS16WT1G uses the SOD-123W surface-mount package (lead-free variant).