BL24C02F-PARC

The BL24C02F-PARC is a 2K-bit (256x8) serial EEPROM from Belling, featuring an I²C interface. It operates at 1.7V–5.5V, making it suitable for low-power applications. Key features include:
- 2K-bit memory organized in 32 pages of 8 bytes each.
- I²C-compatible interface (up to 400kHz clock speed).
- Write protection (via WP pin) and built-in noise filtering.
- High endurance (1 million write cycles) and data retention (100 years).
Commonly used in consumer electronics, IoT devices, and industrial systems, it provides reliable non-volatile storage for configuration data. The PARC suffix may indicate specific packaging or compliance (check datasheet for exact details).
For precise specs, refer to the official Belling datasheet.

Equivalent products to the BL24C02F-PARC (2Kb I²C EEPROM) include:
- AT24C02 (Microchip)
- CAT24C02 (ON Semiconductor)
- M24C02 (STMicroelectronics)
- 24AA02/24LC02 (Microchip)
- FM24C02 (Cypress/Infineon)
These are pin-compatible 2Kb I²C EEPROMs with similar specs. Verify voltage ranges (1.7V–5.5V) and package compatibility for your design.

The BL24C02F-PARC is a 2K-bit (256x8) serial EEPROM with the following key features:
- I²C Interface: Supports standard (100 kHz) and fast (400 kHz) modes.
- Low Voltage Operation: 1.7V to 5.5V supply range.
- High Reliability: Endurance of 1 million write cycles, data retention of 100 years.
- Page Write Mode: 8-byte page buffer for efficient writes.
- Hardware Write Protection: WP pin for memory protection.
- Small Packages: Available in SOP-8, TSSOP-8, and UDFN-8.
- Low Power Consumption: Standby current <1 µA (typical).
- AEC-Q100 Qualified: Suitable for automotive applications.
Ideal for consumer electronics, automotive, and industrial systems requiring reliable non-volatile memory.

The BL24C02F-PARC is a 2Kbit (256 x 8) I²C EEPROM with the following pin configuration and functions:
- Pin Count: 8 pins (SOP-8 package)
- Key Functions:
1. VCC (Pin 8): Power supply (1.7V–5.5V)
2. GND (Pin 4): Ground
3. SDA (Pin 5): Serial data (I²C bidirectional)
4. SCL (Pin 6): Serial clock (I²C input)
5. A0, A1, A2 (Pins 1–3): Address selection (hardware configurable)
6. WP (Pin 7): Write protect (tie to GND for writes, VCC for read-only)
It supports 400kHz I²C communication and features 16-byte page write. Typical applications include data storage in consumer electronics and industrial devices.

The BL24C02F-PARC is a 2K-bit I²C-compatible EEPROM in an 8-pin SOP package. It features a wide voltage range (1.7V to 5.5V), low power consumption, and a 400kHz operating frequency. The package type is SOP-8 (Small Outline Package, 8-pin), suitable for surface-mount applications. It's commonly used in consumer electronics, industrial systems, and automotive applications for data storage.