Abbildungen dienen nur als Referenz
BLM18KG471SN1D
+StücklisteFERRITE BEAD 470 OHM 0603 1LN
-
HerstellerMurata Electronics
-
Herstellerteil #BLM18KG471SN1D
-
Auf Lager28252
365 Tage Qualitätsgarantie
7*24 Stunden-Servicegarantie
90-Tage Kundendienstgarantie
Originalproduktgarantie
Spezifikationen
| Attribut | Wert |
| Series | EMIFIL®, BLM18 |
| PartStatus | Active |
| BaseProductNumber | BLM18KG |
| FilterType | Power Line |
| NumberofLines | 1 |
| Impedance@Frequency | 470 Ohms @ 100 MHz |
| CurrentRating(Max) | 1.5A |
| DCResistance(DCR)(Max) | 130mOhm |
| OperatingTemperature | -55°C ~ 125°C |
| Package | 0603 (1608 Metric) |
| MountingType | Surface Mount |
| Height(Max) | 0.037" (0.95mm) |
| Size/Dimension | 0.063" L x 0.031" W (1.60mm x 0.80mm) |
| Packaging | Cut Tape (CT), Tape & Reel (TR) |
Übersicht
Description
BLM18KG471SN1D is a Murata ferrite-bead EMI filter (single-line) from the BLM series. Key points:
- 471 = about 470 Ω impedance at 100 MHz, providing RF noise suppression.
- Very low DC resistance, so it minimally affects the power or signal line.
- Comes in a small surface-mount package (BLM18K family); SN1D is Murata’s suffix for its variant/packaging.
- Used in series with a line (power or signal) to attenuate high-frequency noise without impacting DC or low-frequency signals.
- Typical applications: DC rails, USB/HDMI/data lines, wireless modules, automotive electronics.
For exact dimensions, current rating, and electrical specs, consult the Murata BLM18KG471SN1D datasheet.
- 471 = about 470 Ω impedance at 100 MHz, providing RF noise suppression.
- Very low DC resistance, so it minimally affects the power or signal line.
- Comes in a small surface-mount package (BLM18K family); SN1D is Murata’s suffix for its variant/packaging.
- Used in series with a line (power or signal) to attenuate high-frequency noise without impacting DC or low-frequency signals.
- Typical applications: DC rails, USB/HDMI/data lines, wireless modules, automotive electronics.
For exact dimensions, current rating, and electrical specs, consult the Murata BLM18KG471SN1D datasheet.
Equivalent
BLM18KG471SN1D is a 0603 ferrite bead (470 Ω @100 MHz). Equivalent products are any 0603/1608-metric EMI ferrite bead with the same impedance (≈470 Ω at 100 MHz), equal or higher DC current rating and similar DC resistance. Look for matching parts from TDK, Yageo, Taiyo Yuden or Murata (same specs). Always verify with datasheets for size, impedance curve, rated current and DC resistance before substituting.
Features
BLM18KG471SN1D is a Murata SMD ferrite bead. Key features:
- 2-terminal ferrite bead for EMI suppression on power/signal lines
- Impedance: 470 Ω (typ) at 100 MHz
- Very low DC resistance for minimal voltage drop
- High current capability suitable for supply lines
- Temperature range: typically -55 °C to +125 °C
- Reflow-solderable; RoHS compliant
- Compact BLM18-series package (SMD, 2-pin)
- Tape-and-reel packaging available for automated assembly
Note: exact dimensions and electrical specs can vary by lot; consult the datasheet for precise values.
- 2-terminal ferrite bead for EMI suppression on power/signal lines
- Impedance: 470 Ω (typ) at 100 MHz
- Very low DC resistance for minimal voltage drop
- High current capability suitable for supply lines
- Temperature range: typically -55 °C to +125 °C
- Reflow-solderable; RoHS compliant
- Compact BLM18-series package (SMD, 2-pin)
- Tape-and-reel packaging available for automated assembly
Note: exact dimensions and electrical specs can vary by lot; consult the datasheet for precise values.
Pinout
Pin count: 2 terminals (single-chip, two end contacts).
Function: BLM18KG471SN1D is a Murata 0603 chip ferrite bead used for EMI/RFI suppression — it presents high impedance at high frequencies (the "471" marking denotes ≈470 Ω in its specified frequency band) to filter high‑frequency noise on power or signal lines while passing DC.
Function: BLM18KG471SN1D is a Murata 0603 chip ferrite bead used for EMI/RFI suppression — it presents high impedance at high frequencies (the "471" marking denotes ≈470 Ω in its specified frequency band) to filter high‑frequency noise on power or signal lines while passing DC.
Manufacturer
- Manufacturer: Murata Manufacturing Co., Ltd. (Murata)
- What kind of company: A Japanese multinational corporation that designs, manufactures, and sells electronic components, including ferrite beads (like the BLM series), capacitors, inductors, sensors, and related electronic devices for the global electronics industry.
- What kind of company: A Japanese multinational corporation that designs, manufactures, and sells electronic components, including ferrite beads (like the BLM series), capacitors, inductors, sensors, and related electronic devices for the global electronics industry.
Application
BLM18KG471SN1D is a Murata ferrite chip inductor (inductance around 470 nH). Common application areas:
- DC-DC converter inductors for buck/boost regulators in mobile devices, wearables, and laptops
- Power-supply decoupling and noise suppression on motherboards and modules
- EMI/RFI filtering and LC networks in smartphones, tablets, IoT devices
- RF front-end filtering and impedance-matching networks in wireless circuits
- Automotive and industrial electronics for noise suppression on power rails
It’s a compact SMT component suited for decoupling and filtering where space and high SRF matter.
- DC-DC converter inductors for buck/boost regulators in mobile devices, wearables, and laptops
- Power-supply decoupling and noise suppression on motherboards and modules
- EMI/RFI filtering and LC networks in smartphones, tablets, IoT devices
- RF front-end filtering and impedance-matching networks in wireless circuits
- Automotive and industrial electronics for noise suppression on power rails
It’s a compact SMT component suited for decoupling and filtering where space and high SRF matter.
Package
BLM18KG471SN1D is a Murata surface-mount chip ferrite bead in the 0603 (1608 metric) package (SMD chip component).
