BTT6200-1ENA

The BTT6200-1ENA is a smart high-side power switch from Infineon’s PROFET™+ 2 family. Designed for 12V automotive applications, it integrates advanced protection features like overload, short-circuit, and overtemperature detection, along with diagnostic feedback.
Key features:
- Single-channel with RDS(on) of 50mΩ (max).
- Current capability up to 23A (with derating).
- Low quiescent current in standby mode.
- PWM capability for inductive loads.
- Diagnostic output for fault detection.
It’s ideal for resistive, inductive, or capacitive loads in automotive systems (e.g., lighting, heating, motors). The device operates via a logic-level control input and is housed in a PG-TO263-7 package.
Applications include body control modules, power distribution, and relay replacements. Its robustness and diagnostic features make it suitable for harsh automotive environments.
For detailed specs, refer to the Infineon datasheet.

The BTT6200-1ENA is a smart high-side power switch. Equivalent products include:
- Infineon BTS50080-1TEA
- STMicroelectronics VND7140AJ
- ON Semiconductor NCP45560
- TI TPS1H100-Q1
These alternatives offer similar features like overcurrent protection, thermal shutdown, and diagnostic feedback. Verify pin compatibility and specs for your application.

The BTT6200-1ENA is a high-side power switch from Infineon's PROFET™ (Protected FET) series. Key features:
- Output Current: Up to 4.5A (continuous)
- Voltage Range: 5.5V to 40V (supports 12V/24V systems)
- Integrated Protection: Overload, short-circuit, overtemperature, and reverse polarity
- Diagnostics: Current sense feedback & open-load detection
- Logic-Level Input: 3.3V/5V compatible (CMOS/TTL)
- Low Standby Current: <10µA (energy-efficient)
- Package: PG-TO263-7 (D2PAK)
Ideal for automotive and industrial applications like resistive, inductive, or capacitive loads.

The BTT6200-1ENA is a 4-channel high-side switch from Infineon's PROFET™+ 2 family.
- Pin Count: 14-pin (PG-DSO-14 package).
- Functions:
- 4 independent high-side outputs (each with overcurrent, overtemperature, and short-circuit protection).
- Diagnostic feedback (open-load detection, thermal shutdown).
- Logic-level inputs (3.3V/5V compatible).
- Low standby current for energy efficiency.
It is commonly used in automotive and industrial applications for driving resistive, inductive, or capacitive loads.

The BTT6200-1ENA is a PG-TO263-7 (also known as D2PAK-7) power package. It features a surface-mount design with 7 pins, optimized for high-current applications. The package provides efficient thermal dissipation and is commonly used in automotive and industrial systems. Dimensions typically align with standard D2PAK specifications.