EMMC32G-IX29-8AC01

EMMC32G-IX29-8AC01 is an embedded MMC (eMMC) memory device with an on-board controller, intended for storage in embedded systems (phones, tablets, IoT, industrial gear). The “32G” typically denotes about 32 gigabytes of user data storage. The “IX29-8AC01” suffix is vendor-specific and usually encodes packaging, voltage/temperature range, speed grade, and revision. The device uses the eMMC MMC interface (8-bit data bus with command/data/response protocol) and relies on its internal controller for wear leveling, bad-block management, ECC, and power management. Features often include wear leveling, bad-block management, ECC, and secure storage options. For exact specs (supply voltage, max clock, speed mode, endurance, temperature range, package type, and security features), refer to the official datasheet from the supplier. If you provide the supplier name or link, I can help locate the precise datasheet and summarize the key specifications.

Features (typical for a 32 GB eMMC device; exact specs depend on the vendor revision for part EMMC32G-IX29-8AC01):
- 32 GB embedded NAND with on‑die controller (no external controller needed)
- JEDEC eMMC standard compliant (Boot partitions: Boot1, Boot2; User data; RPMB)
- Interface: MMC/SD bus with 8-bit data path; supports HS modes (eMMC 4.x/5.x family; higher-speed options in newer revisions)
- Built‑in reliability: ECC, wear leveling, bad-block management
- Security: RPMB for replay-protected storage; hardware write protection where supported
- Power and environment: typical 2.7–3.6 V supply; low‑power modes; wide operating/industrial temperature options
- Packaging: standard eMMC form factor (small BGA, plug‑and‑play with host controller)
Note: exact feature set (speed, temperature range, security options) varies by revision. Please refer to the specific datasheet for EMMC32G-IX29-8AC01 for precise capabilities.

I don’t have the exact datasheet for EMMC32G-IX29-8AC01. Pin count and pinout depend on the specific package revision. Typically, 32‑GB eMMC devices in a 153‑ball BGA use an 8‑bit data bus (D0–D7) plus CMD and CLK, with multiple VCC/VCCQ and GND pins (plus NC/power pins). For the precise pin count and functions, please consult the vendor’s datasheet for this exact part variant.

Typical application areas for EMMC32G-IX29-8AC01:
- Mobile devices: smartphones, tablets, handhelds
- Automotive: infotainment, digital cockpit, telematics
- Consumer electronics: smart TVs, set-top boxes, cameras, gaming consoles
- Industrial/embedded: automation controllers, POS terminals, kiosks, surveillance systems
- IoT and edge: gateways, smart appliances, edge computing devices
- Medical devices requiring compact, embedded storage
Note: It’s a 32 GB eMMC module, suitable for solid-state embedded storage in compact, cost-effective consumer and industrial products.