Abbildungen dienen nur als Referenz
EPM3128ATC100-10N
+StücklisteIC CPLD 128MC 10NS 100TQFP
-
HerstellerAltera
-
Herstellerteil #EPM3128ATC100-10N
-
Auf Lager6794
365 Tage Qualitätsgarantie
7*24 Stunden-Servicegarantie
90-Tage Kundendienstgarantie
Originalproduktgarantie
Spezifikationen
| Attribut | Wert |
| Series | MAX® 3000A |
| Part Status | Obsolete |
| Base Product Number | EPM3128 |
| Digi Key Programmable | Not Verified |
| Programmable Type | In System Programmable |
| Delay Time tpd(1) Max | 10 ns |
| Voltage Supply - Internal | 3V ~ 3.6V |
| Number of Logic Elements / Blocks | 8 |
| Number of Macrocells | 128 |
| Number of Gates | 2500 |
| Number of I/O | 80 |
| Operating Temperature | 0°C ~ 70°C (TA) |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Supplier Device Package | 100-TQFP (14x14) |
| Packaging | Tray |
Übersicht
Description
- 128 macrocells, 2,500 usable gates
- 100-pin TQFP package, 10ns pin-to-pin delay
- 3.3V operation, in-system programmable (ISP) via JTAG
- Non-volatile EEPROM-based configuration
Applications include glue logic, bus interfacing, and control logic in embedded systems. It offers low power consumption and fast I/O performance, making it suitable for cost-sensitive, low-to-medium complexity designs.
For programming, Intel’s Quartus II or legacy MAX+PLUS II software can be used.
Equivalent
1. Xilinx XC9536XL-10VQG44C (similar logic density).
2. Lattice ispMACH 4032ZE-10LT44 (comparable features).
3. Microchip ATF1504AS-10AU44 (PLD alternative).
These offer similar logic capacity and speed. Always verify pin compatibility and functionality for your design.
Features
- Logic Elements: 128 macrocells, 2,500 usable gates.
- Speed: 10ns pin-to-pin delay, 227.3 MHz max frequency.
- I/O: 80 user I/O pins, 3.3V operation with 5V-tolerant inputs.
- Memory: 128-bit in-system programmable (ISP) Flash memory.
- Package: 100-pin TQFP (Thin Quad Flat Pack).
- Power: Low-power operation, typical 20mA standby current.
- Features: Built-in JTAG boundary scan, hot-socketing support.
Ideal for glue logic, interface bridging, and low-density designs.
Pinout
- Pin Count: 100 (TQFP package)
- Function: Provides programmable logic with 128 macrocells, 80 user I/O pins, and 2,500 usable gates. It operates at 10ns propagation delay (speed grade -10).
Key features:
- 3.3V/5V tolerant I/O
- In-system programmable (ISP) via JTAG
- Supports combinatorial and sequential logic designs
Common applications include glue logic, interface bridging, and control logic in embedded systems.
Application
- Industrial Control – Used for logic interfacing, motor control, and automation.
- Communications – Implements glue logic, signal routing, and protocol conversion.
- Consumer Electronics – Powers display controllers, peripheral interfaces, and smart devices.
- Automotive Systems – Manages sensor data, lighting control, and infotainment.
- Embedded Systems – Provides flexible I/O expansion and timing control.
Its low power, fast response, and reprogrammability make it ideal for small to medium logic designs.
Package
Frequently Asked Questions
Q: What is the maximum operating frequency for the EPM3128ATC100-10N?
A: Based on the 10 ns delay time (tpd1), the maximum frequency is approximately 100 MHz, but actual frequency depends on design logic.
Q: Can this device be reprogrammed after initial programming?
A: Yes, it supports In System Programmable (ISP) via JTAG, allowing reprogramming without removal from the circuit board.
Q: What is the internal voltage supply range required?
A: It requires a 3.0V to 3.6V supply, typical 3.3V operation as per MAX 3000A series specifications.
Q: How many user I/O pins are available in the 100-TQFP package?
A: The device provides 80 I/O pins, as specified, suitable for medium-density logic integration.
Q: Is the EPM3128ATC100-10N suitable for commercial temperature environments?
A: Yes, its operating temperature range is 0°C to 70°C (TA), ideal for commercial or industrial non-extreme designs.
Q: What is the total logic capacity in gates?
A: It contains 128 macrocells and 2500 usable gates, making it suitable for glue logic or state machine applications.
