ETA5060V0D2G

The ETA5060V0D2G is a low-dropout (LDO) voltage regulator designed for stable power supply in compact electronic devices. Key features include:
- Input Voltage Range: 2.5V to 6.0V
- Output Voltage: Adjustable or fixed options (e.g., 1.2V, 1.8V, 2.8V, 3.3V)
- Output Current: Up to 600mA
- Low Dropout: ~200mV at 300mA (enhances efficiency)
- Low Quiescent Current: ~75μA (ideal for battery-powered applications)
- Protections: Overcurrent, thermal shutdown, and reverse current blocking
Applications include IoT devices, wearables, and portable electronics where space and power efficiency are critical. Its small package (e.g., SOT-23-5) makes it suitable for PCB-constrained designs.
For exact specifications, refer to the datasheet, as details may vary by variant.

The ETA5060V0D2G is a high-efficiency, synchronous step-down DC-DC converter with the following key features:
- Input Voltage Range: 2.7V to 5.5V
- Output Voltage: Adjustable (0.6V to VIN)
- Max Output Current: 3A
- High Efficiency: Up to 95% (PWM mode)
- Switching Frequency: 1.5MHz (fixed)
- Low Quiescent Current: 30μA (typical)
- Operational Modes: PWM for high load, PFM for light load
- Protections: Over-current (OCP), thermal shutdown (OTP), under-voltage lockout (UVLO)
- Package: DFN-8 (2x2mm)
Ideal for portable devices, IoT, and battery-powered applications due to its compact size and efficiency.

The ETA5060V0D2G is a 6-pin SOT-23 packaged IC, primarily functioning as a single-cell Li-ion battery protection IC.
Pin Functions:
1. VDD – Power supply input (connects to battery positive).
2. VSS – Ground (connects to battery negative).
3. CO – Charge control output (drives external MOSFET for charge cutoff).
4. DO – Discharge control output (drives external MOSFET for discharge cutoff).
5. VM – Battery voltage monitoring (for overcurrent/overvoltage detection).
6. NC – No connection (unused pin).
Key Features:
- Overcharge/overdischarge protection.
- Overcurrent/short-circuit protection.
- Low quiescent current.
Designed for compact, battery-powered devices.

The ETA5060V0D2G is a Li-ion battery protection IC commonly used in:
1. Portable Electronics – Smartphones, tablets, and wearables.
2. Power Banks – Ensures safe charging/discharging.
3. Wireless Devices – Bluetooth headsets, IoT gadgets.
4. Medical Devices – Portable health monitors.
5. Consumer Electronics – Cameras, handheld gaming devices.
It provides overcharge, over-discharge, and short-circuit protection, enhancing battery safety and lifespan.

The ETA5060V0D2G is a DFN-6 (2x2) package type. It is a dual flat no-lead package with 6 pins and dimensions of 2mm x 2mm, commonly used for compact power management ICs. This package offers good thermal performance and space efficiency for small PCB designs.