Abbildungen dienen nur als Referenz
FP6185-12S5
+Stückliste-
HerstellerFitipower Integrated Tech
-
Herstellerteil #FP6185-12S5
-
Auf Lager10412
365 Tage Qualitätsgarantie
7*24 Stunden-Servicegarantie
90-Tage Kundendienstgarantie
Originalproduktgarantie
Spezifikationen
| Attribut | Wert |
| Manufacturer | Fitipower Integrated Tech |
| Package | SOT-23-5 |
Übersicht
Description
The FP6185-12S5 is a synchronous step-down DC-DC converter designed for high-efficiency voltage regulation. Key features include:
- Input Voltage: 4.5V to 18V
- Output Voltage: Adjustable (e.g., 0.6V to 12V)
- Output Current: Up to 5A
- High Efficiency: Up to 95% (PWM control)
- Switching Frequency: 500kHz (typ.)
- Protections: Over-current (OCP), thermal shutdown (OTP), and under-voltage lockout (UVLO)
It integrates low-side and high-side MOSFETs, reducing external component count. Applications include POL (point-of-load) converters, industrial systems, and embedded devices.
For detailed specs, refer to the datasheet.
- Input Voltage: 4.5V to 18V
- Output Voltage: Adjustable (e.g., 0.6V to 12V)
- Output Current: Up to 5A
- High Efficiency: Up to 95% (PWM control)
- Switching Frequency: 500kHz (typ.)
- Protections: Over-current (OCP), thermal shutdown (OTP), and under-voltage lockout (UVLO)
It integrates low-side and high-side MOSFETs, reducing external component count. Applications include POL (point-of-load) converters, industrial systems, and embedded devices.
For detailed specs, refer to the datasheet.
Equivalent
The FP6185-12S5 is a step-down DC-DC converter. Equivalent alternatives include:
- MP2307 (Monolithic Power Systems)
- LM2596 (Texas Instruments)
- AP1501 (Diodes Incorporated)
- XL1509 (XLSEMI)
- SY8303 (Silergy)
These chips offer similar voltage input/output ranges and current capabilities. Always verify pin compatibility and specifications for your application.
- MP2307 (Monolithic Power Systems)
- LM2596 (Texas Instruments)
- AP1501 (Diodes Incorporated)
- XL1509 (XLSEMI)
- SY8303 (Silergy)
These chips offer similar voltage input/output ranges and current capabilities. Always verify pin compatibility and specifications for your application.
Features
The FP6185-12S5 is a synchronous step-down DC-DC converter with the following key features:
- Input Voltage Range: 4.5V to 18V
- Output Voltage: Adjustable (0.6V to 12V)
- Output Current: Up to 5A
- High Efficiency: Up to 95% (PWM mode)
- Switching Frequency: 500kHz (fixed)
- Protections: Over-current (OCP), over-voltage (OVP), under-voltage lockout (UVLO), and thermal shutdown
- Operation Modes: PWM for high efficiency, supports forced PWM or PFM modes
- Package: SOP-8 (EP) with exposed pad for better thermal performance
- Applications: Consumer electronics, networking, and industrial systems
Compact, efficient, and reliable, the FP6185-12S5 is ideal for powering low-voltage devices.
- Input Voltage Range: 4.5V to 18V
- Output Voltage: Adjustable (0.6V to 12V)
- Output Current: Up to 5A
- High Efficiency: Up to 95% (PWM mode)
- Switching Frequency: 500kHz (fixed)
- Protections: Over-current (OCP), over-voltage (OVP), under-voltage lockout (UVLO), and thermal shutdown
- Operation Modes: PWM for high efficiency, supports forced PWM or PFM modes
- Package: SOP-8 (EP) with exposed pad for better thermal performance
- Applications: Consumer electronics, networking, and industrial systems
Compact, efficient, and reliable, the FP6185-12S5 is ideal for powering low-voltage devices.
Pinout
The FP6185-12S5 is a 12-pin synchronous step-down DC-DC converter. Key functions include:
- Input Voltage (VIN): 4.5V–18V
- Output Voltage (VOUT): Adjustable (0.6V–VIN)
- Output Current (IOUT): Up to 5A
- Switching Frequency: 300kHz–1.2MHz (adjustable)
Pin Functions:
1. VIN: Power input
2. GND: Ground
3. EN: Enable control
4. FB: Feedback for output voltage regulation
5. COMP: Compensation for loop stability
6. SS: Soft-start control
7. BOOT: Bootstrap for high-side MOSFET
8. SW: Switching node
9-12. PGND: Power ground
Designed for efficiency in power supplies, it includes protections like over-current (OCP), over-voltage (OVP), and thermal shutdown (OTP).
- Input Voltage (VIN): 4.5V–18V
- Output Voltage (VOUT): Adjustable (0.6V–VIN)
- Output Current (IOUT): Up to 5A
- Switching Frequency: 300kHz–1.2MHz (adjustable)
Pin Functions:
1. VIN: Power input
2. GND: Ground
3. EN: Enable control
4. FB: Feedback for output voltage regulation
5. COMP: Compensation for loop stability
6. SS: Soft-start control
7. BOOT: Bootstrap for high-side MOSFET
8. SW: Switching node
9-12. PGND: Power ground
Designed for efficiency in power supplies, it includes protections like over-current (OCP), over-voltage (OVP), and thermal shutdown (OTP).
Application
The FP6185-12S5 is a DC-DC buck converter module commonly used in:
1. Industrial Automation – Powering sensors, PLCs, and control systems.
2. Telecommunications – Voltage regulation in networking equipment.
3. Consumer Electronics – Efficient power management in portable devices.
4. Automotive Electronics – Supporting infotainment and ADAS systems.
5. Renewable Energy – Solar/Wind power conversion and storage systems.
Its compact size, high efficiency (up to 95%), and wide input range (4.5–18V) make it suitable for space-constrained and energy-sensitive applications.
1. Industrial Automation – Powering sensors, PLCs, and control systems.
2. Telecommunications – Voltage regulation in networking equipment.
3. Consumer Electronics – Efficient power management in portable devices.
4. Automotive Electronics – Supporting infotainment and ADAS systems.
5. Renewable Energy – Solar/Wind power conversion and storage systems.
Its compact size, high efficiency (up to 95%), and wide input range (4.5–18V) make it suitable for space-constrained and energy-sensitive applications.
Package
The FP6185-12S5 is a DC-DC buck converter module in a surface-mount (SMD) package. It typically comes in a compact, non-isolated SOP-8EP package, designed for efficient power conversion in space-constrained applications. Key features include a 12V output, high efficiency, and a small footprint. Exact dimensions and pin configuration should be verified in the datasheet.
