GD25D10CTEGR

Abbildungen dienen nur als Referenz

GD25D10CTEGR

+Stückliste

IC FLASH 1MBIT SPI/DUAL 8SOP

  • HerstellerGigaDevice Semiconductor (HK) Limited

  • Herstellerteil #GD25D10CTEGR

  • Auf Lager27814

365 Tage Qualitätsgarantie

7*24 Stunden-Servicegarantie

90-Tage Kundendienstgarantie

Originalproduktgarantie

Spezifikationen

Attribut Wert
Series GD25D
Part Status Active
Base Product Number GD25D10
Memory Type Non-Volatile
Memory Format FLASH
Technology FLASH - NOR (SLC)
Memory Size 1Mbit
Memory Organization 128K x 8
Memory Interface SPI - Dual I/O
Clock Frequency 100 MHz
Write Cycle Time - Word, Page 80µs, 4ms
Voltage - Supply 2.7V ~ 3.6V
Operating Temperature -40°C ~ 125°C (TA)
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154", 3.90mm Width)
Supplier Device Package 8-SOP
Packaging Tape & Reel (TR)
Access Time 6 ns

Übersicht

Description

GD25D10CTEGR is a 1‑Mbit serial NOR flash memory from GigaDevice (GD25D family) used for non-volatile storage in embedded systems. It provides SPI‑interface access to a small flash bank suitable for firmware and data storage.
Key points
- Capacity and organization: 1,048,576 bits (128 KB) with 256-byte pages; 4 KB sectors; 32 KB/64 KB blocks.
- Operations: Read/Fast Read, Page Program (typically up to 256 bytes per write), Sector/Block Erase, Chip Erase; supports write enable/disable and status/protection features.
- Interface and power: SPI-compatible interface (standard/fast read modes); typically 2.7–3.6 V operation; 8-pin package (TEGR suffix indicates such packaging).
- Use cases: firmware storage and updates, bootloaders, small embedded apps, data logging.
- Note: exact timing, voltage, and pinout depend on the datasheet; verify for your design.
If you need, I can summarize the most relevant electrical specs from the datasheet.

Equivalent

Equivalent 1Mbit SPI NOR flash (3.3V, 8-pin):
- Winbond W25Q10 (CV/BV)
- Macronix MX25D10 (D/U variants)
- Spansion/Cypress S25FL010A
- ISSI IS25LP010A
- ESMT EN25Q10
- SST SST25VF010
Note: verify pinout, timing, and packaging in datasheets for exact cross-reference.

Features

Key features of GD25D10CTEGR (1 Mbit serial flash, 8-pin):
- 1 Mbit (128 KBytes) serial flash memory
- 2.7–3.6 V supply; 8-pin package (TEGR)
- SPI-compatible interface (standard SPI)
- Page size: 256 bytes; supports 256-byte page program
- Sector/Block architecture: 4 KB sectors; 32 KB and 64 KB blocks; chip erase option
- Fast read and high-speed serial access
- Program/Erase: page program, sector/block erase
- Power management: Deep power-down and wake-up modes; low standby current
- Write protection: hardware WP pin and status-register protection
- JEDEC ID and manufacturer ID access
- Addressing: 3-byte addressing (suitable for 128 KB)
- Industrial temperature range: -40 to 85°C
Note: exact timing figures (e.g., read/erase/program times) depend on device operating conditions and are specified in the datasheet.

Pinout

8 pins. Function: GD25D10CTEGR is an 1‑Mbit serial SPI NOR flash memory from GigaDevice, storing code/data. It uses a standard 4‑wire SPI interface (CS, SCK, SI, SO) with optional WP# and HOLD# pins, plus VCC and GND.

Manufacturer

Manufacturer: GigaDevice Semiconductor Inc. It is a fabless semiconductor company based in Beijing, China, that designs and markets flash memory products (NOR/NAND serial flash) and related microcontroller solutions.

Application

GD25D10CTEGR is a 1-Mbit serial SPI flash memory. Common application areas:
- Firmware storage and bootloader for microcontrollers/SoCs
- Embedded code and data storage in consumer electronics, IoT, and industrial equipment
- In-field firmware updates and parameter storage
- Non-volatile data logging and configuration storage
- Small configuration or bitstream storage for FPGAs/PLDs and microcontrollers
- Automotive electronics requiring compact, reliable non-volatile memory

Package

Package type: 8-pin SOP (SOIC-8) package, RoHS-compliant lead-free.

Produkte, die mit GD25D10CTEGR zusammenhängen