GD25LD20CEIGR

GD25LD20CEIGR is a GigaDevice 2‑Mbit serial SPI flash memory. It stores firmware and data in embedded systems and comes in an 8‑pin RoHS package. Key points:
- Density: 2 Mbit (256 KB)
- Interface: Standard SPI (with options for fast read)
- Features: Read/fast read, write enable/disable, page program, sector/block/chip erase, and status register access
- Power: typically operates from a low supply (e.g., around 2.7–3.6 V; variants exist for different temp ranges)
- Packaging: 8‑pin package (suffix indicates RoHS/commercial/industrial options)
- Common uses: boot code storage, configuration data, firmware updates, data logging
The “CEIGR” suffix mainly encodes the package, temperature range, and RoHS/industrial options. For exact electrical specs, timing, erase sizes, endurance, and pinout details, consult the GD25LD20CEIGR datasheet from GigaDevice.

GD25LD20CEIGR is a 2-Mbit SPI NOR flash. Drop-in equivalents from other vendors include: Winbond W25Q20BV, Macronix MX25L2006E, Spansion/Cypress S25FL020A, ISSI IS25LP020D, Nuvoton N25Q020A. Always verify voltage (1.65–3.6V), package (8-pin SOIC/SOP), timing and sector layout to ensure full compatibility.

GD25LD20CEIGR is a 2 Mbit serial flash memory from GigaDevice. Key features:
- Density: 2 Mbit (≈256 KB) non-volatile storage.
- SPI interface with standard SPI plus Dual/Quad I/O modes for higher throughput.
- 3-byte (24-bit) addressing; supports fast read and Quad/Dual SPI timing.
- Page program up to 256 bytes.
- Erase options: 4 KB sectors; 32 KB and/or 64 KB blocks; chip erase.
- Low-voltage operation: typically 2.7–3.6 V.
- Power-down and Deep Power-down modes for low current; wake-up via CS.
- Endurance around 100k erase cycles; data retention ~20 years at room temp.
- Protection features: WP# and HOLD# pins; standard 8-pin package.
- Industrial temperature range (-40°C to +85°C) available.

Pin count: 8 pins (SOP-8).
Function: GD25LD20CEIGR is an SPI Serial NOR flash memory (non-volatile storage) from GigaDevice. It uses a standard SPI interface for read, program (page), erase, and status operations. Typical pins: CS, CLK, DI (MOSI), DO (MISO), VCC, GND, WP#, HOLD#.

The GD25LD20CEIGR is manufactured by GigaDevice Semiconductor Inc. GigaDevice is a fabless semiconductor company based in China that designs and markets flash memory (NOR serial flash) and related memory products, outsourcing fabrication to foundries.

GD25LD20CEIGR is a 2‑Mbit SPI serial flash memory. Typical application areas:
- External code and data memory for MCUs/SoCs in embedded systems (industrial, consumer, automotive)
- Firmware storage and OTA/update flash for IoT devices, wearables, and consumer electronics
- Storage for configuration data, parameters, LUTs, and caches
- Data logging memory for sensors, meters, and industrial equipment
- Boot flash and recovery/secure images for bootloaders and software updates
This makes it suitable as compact, low‑voltage program/data storage in many embedded environments.

8-pin SOP (SOIC-8) package, RoHS-compliant (lead-free).