GP8101S-TC50-EW

The GP8101S-TC50-EW is a PWM to analog signal converter designed to translate PWM input (5-100% duty cycle) into a 0-5V, 0-10V, or 4-20mA output. It features high accuracy (±0.1%), isolated power supply (9-36V DC), and wide temperature operation (-40°C to +85°C).
Key applications include motor control, industrial automation, and sensor signal conversion. Its compact size (22.5mm × 75mm) and DIN rail mounting make it suitable for space-constrained installations.
Notable features:
- PWM input frequency range: 1Hz–1kHz
- Adjustable output via potentiometer
- Reverse polarity & overcurrent protection
- High noise immunity
Ideal for integrating PWM-based systems with analog control devices, the GP8101S-TC50-EW ensures reliable, precise signal conversion in harsh environments.

The GP8101S-TC50-EW is a compact, high-performance PWM-to-analog signal converter with the following key features:
- Input: Accepts 0-100% PWM (5V/3.3V compatible).
- Output: Provides 0-5V, 0-10V, or 4-20mA (selectable via DIP switch).
- Isolation: 3000V DC isolation between input and output.
- Accuracy: ±0.1% F.S. for precise signal conversion.
- Power Supply: 9-36V DC wide-range input.
- Response Time: <1ms for fast signal processing.
- Protection: Reverse polarity, over-current, and short-circuit protection.
- Operating Temp: -40°C to +85°C for harsh environments.
- Compact Size: 22.5 x 75 x 100mm (WxHxD) for easy installation.
Ideal for industrial automation, motor control, and PLC systems requiring reliable PWM-to-analog conversion.

The GP8101S-TC50-EW is a 50-pin IC designed for PWM signal to analog voltage conversion.
Key Functions:
- Converts PWM input (0-100% duty cycle) to 0-5V/0-10V analog output.
- Supports 12V/24V power supply (wide voltage range).
- Features high precision (±0.5% typical) and low ripple.
- Includes short-circuit protection and reverse polarity protection.
Applications:
- Motor speed control, LED dimming, and industrial automation.
Pin Configuration:
- PWM input (Pin 1-2)
- Power supply (VCC, GND)
- Analog output (VOUT, GND)
- Adjustment pins (for gain/offset calibration)
Compact and reliable, it simplifies PWM-to-analog signal conversion in embedded systems.

The GP8101S-TC50-EW is a PWM-to-analog signal converter IC, commonly used in:
1. Industrial Automation – Converts PWM signals to analog for motor control, sensors, and actuators.
2. LED Dimming – Adjusts brightness by converting PWM to analog voltage/current.
3. Power Supplies – Regulates output voltage/current in DC-DC converters.
4. Automotive Electronics – Controls lighting, fans, and other PWM-driven systems.
5. Consumer Electronics – Used in devices requiring precise analog signal generation from PWM.
Its compact design and high accuracy make it suitable for embedded systems and applications needing reliable signal conversion.