GT24C256C-2UDLI-TR

The GT24C256C-2UDLI-TR is a 256Kb serial Electrically Erasable Programmable Read-Only Memory (EEPROM) designed for high-density storage solutions. It utilizes an I2C bus for communication, enabling efficient data transfer with minimal pin usage. The device operates at a voltage range of 1.7V to 5.5V, making it versatile for various applications. Its low-power consumption ensures suitability for battery-operated devices.
Key features include a two-wire I2C interface, support for 1 MHz clock frequency, and byte and page write capabilities, which enhance data handling flexibility. The EEPROM is organized as 32K x 8 bits and offers a maximum clock frequency of 1 MHz, facilitating swift operations. It also includes hardware write protection for data integrity and reliability across 1 million write cycles and 100 years of data retention.
The GT24C256C-2UDLI-TR is typically packaged in a compact TSSOP-8 form factor, making it ideal for space-constrained environments. Its robust performance and efficiency make it suitable for consumer electronics, industrial control, and communication systems.

The GT24C256C-2UDLI-TR is an I2C EEPROM. Equivalent products include:
1. Microchip 24LC256
2. STMicroelectronics M24C256
3. Atmel AT24C256
4. ON Semiconductor CAT24C256
5. ROHM BR24C256
6. NXP Semiconductors PCF85263
These alternatives typically offer similar specifications in terms of memory size, interface, and voltage range, but always verify compatibility with your application requirements.

The GT24C256C-2UDLI-TR is a 256 Kb (32,768 x 8) I2C EEPROM. It typically features an 8-pin configuration. Here are the pin functions:
1. A0, A1, A2: These are address pins used to set the I2C device address, allowing connection of multiple EEPROMs on the same bus.
2. VCC: Power supply pin for the device.
3. GND: Ground connection pin.
4. SDA (Serial Data): This pin is used for bidirectional data transfer in I2C communication.
5. SCL (Serial Clock): This pin is the clock input for the I2C interface.
6. WP (Write Protect): This pin can be used to protect the write operations to the EEPROM, preventing overwriting of data when high.
This EEPROM is utilized in various applications needing non-volatile memory storage with I2C interface, such as consumer electronics, data logging, and configuration settings storage.

The manufacturer of the GT24C256C-2UDLI-TR is Giantec Semiconductor Corporation. Giantec is a company that specializes in the design and production of high-performance, high-quality analog and mixed-signal integrated circuits. Their product portfolio includes memory products such as EEPROMs, which are electrically erasable programmable read-only memory chips. These components are widely used in various applications including consumer electronics, automotive, industrial, and communication devices. Giantec focuses on providing innovative solutions and maintaining high standards for their semiconductor products to serve a broad range of electronic applications.

The GT24C256C-2UDLI-TR is a 256Kb I2C CMOS Serial EEPROM, commonly used for applications requiring reliable non-volatile memory. Key application areas include:
1. Consumer Electronics: Storing configuration settings and calibration data.
2. Industrial Automation: Logging operational data and system parameters.
3. Automotive Systems: Managing system settings and diagnostic information.
4. Networking Devices: Storing firmware and configuration data.
5. Medical Devices: Recording patient data and device configurations.
6. Smart Cards: Secure storage of personal and authentication data.
7. IoT Devices: Retaining device settings and sensor data.
Its low power consumption and wide operating temperature range make it versatile for various environmental conditions.

The GT24C256C-2UDLI-TR is a memory IC, specifically a 256-Kbit I2C CMOS Serial EEPROM. It typically comes in an 8-pin TSSOP (Thin Shrink Small Outline Package) package type. The "-TR" suffix indicates the device is supplied in tape and reel packaging, which is suitable for automated assembly processes.