Abbildungen dienen nur als Referenz
H27U1G8F2BTR-BC
+Stückliste-
HerstellerJLCPCB-Baugruppe
-
Herstellerteil #H27U1G8F2BTR-BC
-
Auf Lager29009
365 Tage Qualitätsgarantie
7*24 Stunden-Servicegarantie
90-Tage Kundendienstgarantie
Originalproduktgarantie
Spezifikationen
| Attribut | Wert |
| Manufacturer | JLCPCB Assembly |
| Package | TSOP-I48 |
Übersicht
Description
### Key Features:
- Capacity: 1Gb (128MB)
- Interface: 8-bit asynchronous (supports ONFI 1.0)
- Organization: 128M × 8 bits
- Voltage: 3.3V (Vcc)
- Speed: 25ns (tRC/tWC)
- Package: 48-pin TSOP (standard footprint)
- Endurance: ~100K program/erase cycles
### Applications:
- Embedded systems
- Consumer electronics (set-top boxes, printers)
- Industrial storage
### Advantages:
- Low power consumption
- Reliable performance
- Cost-effective for legacy designs
This chip is a single-level cell (SLC) NAND, ensuring faster writes and better endurance than MLC/TLC alternatives. It’s ideal for applications requiring moderate density with robust operation.
Equivalent
- Micron MT29F1G08ABAEAWP-IT
- Winbond W29N01GVSIAA
- Toshiba TC58NVG0S3HTA00
- Samsung K9F1G08U0D-SCB0
These are 1Gb (128MB) SLC NAND Flash chips with similar specs (3.3V, 8-bit I/O, TSOP-48 package). Verify pinout and timing compatibility before substitution.
Features
- Capacity: 1Gb (128MB)
- Interface: 8-bit I/O asynchronous NAND
- Organization: 128M x 8 bits
- Voltage: 3.3V (Vcc)
- Page Size: 2KB + 64B spare area
- Block Size: 128KB (64 pages per block)
- Speed: 25ns (tRC/tWC) access time
- Endurance: 100K program/erase cycles
- Reliability: ECC (Error Correction Code) support
- Package: 48-pin TSOP1
Designed for embedded storage, it supports sequential read/write operations and is commonly used in consumer electronics, networking, and industrial applications.
Manufacturer
SK Hynix is a leading global producer of memory chips, specializing in DRAM, NAND flash, and other semiconductor solutions. It is one of the largest memory suppliers worldwide, competing with companies like Samsung and Micron. The company supplies components for various applications, including consumer electronics, data centers, and mobile devices.
The H27U1G8F2BTR-BC is an older SLC (Single-Level Cell) NAND chip, primarily used in industrial and embedded systems requiring high reliability.
Application
- Consumer Electronics: Smart TVs, set-top boxes, digital cameras.
- Embedded Systems: IoT devices, industrial controllers, automation.
- Storage Devices: USB drives, memory cards, SSDs (low-capacity).
- Automotive: Infotainment, dashcams, telematics (non-critical).
- Networking: Routers, modems, firmware storage.
It operates at 3.3V, supports SLC/MLC NAND, and is used where low-cost, reliable flash storage is needed.
Package
Frequently Asked Questions
Q: What is the typical application for the H27U1G8F2BTR-BC in TSOP-I48 package?
A: This is a 1Gbit NAND Flash memory ideal for high-density data storage in embedded systems, SSDs, and consumer electronics requiring reliable non-volatile memory.
Q: Is this component compatible with standard NAND Flash controllers?
A: Yes, the TSOP-I48 package supports standard NAND interface protocols, making it compatible with most common NAND Flash controllers.
Q: What voltage levels does this device require?
A: Typically operates at 2.7V to 3.6V for core and I/O, but verify with the manufacturer’s datasheet for precise specifications.
Q: Can the H27U1G8F2BTR-BC be used in industrial temperature ranges?
A: Package TSOP-I48 suggests standard commercial temperature range, but check the datasheet for exact operating conditions as not specified.
Q: Does this NAND Flash support on-chip bad block management?
A: Standard NAND Flash requires external ECC and bad block management; it does not include built-in management like some newer technologies.
Q: What is the pin count and pitch for the TSOP-I48 package?
A: It has 48 pins with a 0.5mm pitch, suitable for surface-mount assembly on standard PCBs.
