Abbildungen dienen nur als Referenz
IS25LP128F-JBLA3-TR
+StücklisteIC FLASH 128MBIT SPI/QUAD 8SOIC
-
HerstellerISSI, Integrated Silicon Solution Inc.
-
Herstellerteil #IS25LP128F-JBLA3-TR
-
Auf Lager6790
365 Tage Qualitätsgarantie
7*24 Stunden-Servicegarantie
90-Tage Kundendienstgarantie
Originalproduktgarantie
Spezifikationen
| Attribut | Wert |
| Part Status | Active |
| Base Product Number | IS25LP128 |
| Digi Key Programmable | Not Verified |
| Memory Type | Non-Volatile |
| Memory Format | FLASH |
| Technology | FLASH - NOR (SLC) |
| Memory Size | 128Mbit |
| Memory Organization | 16M x 8 |
| Memory Interface | SPI - Quad I/O, QPI, DTR |
| Clock Frequency | 166 MHz |
| Write Cycle Time - Word, Page | 40µs, 800µs |
| Voltage - Supply | 2.3V ~ 3.6V |
| Operating Temperature | -40°C ~ 125°C (TA) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.209", 5.30mm Width) |
| Supplier Device Package | 8-SOIC |
| Packaging | Tape & Reel (TR) |
| Access Time | 6.5 ns |
| Grade | Automotive |
| Qualification | AEC-Q100 |
Übersicht
Description
IS25LP128F-JBLA3-TR is a 128‑Mbit serial NOR flash memory from ISSI (IS25LP family). It stores firmware or data and is accessed via an SPI-compatible interface. It supports standard flash operations: read, fast read, page program, sector/block/chip erase, and hardware write protection with status/configuration registers. It includes power-down and sleep modes for low power. The JBLA3 suffix denotes the specific package type (8-pin small-outline) and TR indicates tape-and-reel packaging for manufacturing. Typical applications include boot code and firmware storage in microcontrollers and embedded systems, automotive or consumer electronics requiring reliable non-volatile storage. For exact electrical specs (voltage range, timing, endurance, temperature) consult the IS25LP128F datasheet and the JBLA3 packaging documentation.
Equivalent
Common 128-Mbit SPI-NOR flash equivalents to IS25LP128F-JBLA3-TR:
- Winbond W25Q128FV
- Winbond W25Q128JV
- GigaDevice GD25Q128C (and GD25Q128B)
- Macronix MX25L12845G (and MX25U12845G family)
- Microchip/SST SST25VF128B
- Spansion S25FL128S
Note: verify timing, voltage, addressing mode (3-byte vs 4-byte), and JEDEC IDs for exact pinout and compatibility.
- Winbond W25Q128FV
- Winbond W25Q128JV
- GigaDevice GD25Q128C (and GD25Q128B)
- Macronix MX25L12845G (and MX25U12845G family)
- Microchip/SST SST25VF128B
- Spansion S25FL128S
Note: verify timing, voltage, addressing mode (3-byte vs 4-byte), and JEDEC IDs for exact pinout and compatibility.
Features
IS25LP128F-JBLA3-TR features (concise):
- 128‑Mbit (16 MByte) Serial Flash memory
- SPI interface with standard, Dual I/O, and Quad I/O read modes
- 256-byte page size; supports 4 KB/32 KB/64 KB sector erases and chip erase
- Fast read up to 104 MHz (quad/dual I/O read speeds available)
- Low‑power modes: deep power-down and standby
- Endurance and retention: typical up to 100k erase cycles; long data retention
- Security features: block protection, write protection (WP/SRWD), configurable protection regions
- XIP capable (execute-in-place) for code execution directly from flash
- 2.7–3.6 V operation; industrial temperature range (typical -40°C to 85°C)
Notes: actual packaging and exact temp/specs may vary by vendor revision; verify against the specific datasheet for JBLA3-TR.
- 128‑Mbit (16 MByte) Serial Flash memory
- SPI interface with standard, Dual I/O, and Quad I/O read modes
- 256-byte page size; supports 4 KB/32 KB/64 KB sector erases and chip erase
- Fast read up to 104 MHz (quad/dual I/O read speeds available)
- Low‑power modes: deep power-down and standby
- Endurance and retention: typical up to 100k erase cycles; long data retention
- Security features: block protection, write protection (WP/SRWD), configurable protection regions
- XIP capable (execute-in-place) for code execution directly from flash
- 2.7–3.6 V operation; industrial temperature range (typical -40°C to 85°C)
Notes: actual packaging and exact temp/specs may vary by vendor revision; verify against the specific datasheet for JBLA3-TR.
Pinout
- Pin count: 8 pins (8-pin package, IS25LP128F-JBLA3-TR)
- Function: 8‑pin SPI serial Flash memory. Pinout (typical SOIC):
- 1 CS# (chip select, active low)
- 2 DO/SO (data out)
- 3 WP# (write protect, active low)
- 4 GND
- 5 DI/SI (data in)
- 6 SCK (serial clock)
- 7 HOLD# (hold, active low)
- 8 VCC (power)
- Function: 8‑pin SPI serial Flash memory. Pinout (typical SOIC):
- 1 CS# (chip select, active low)
- 2 DO/SO (data out)
- 3 WP# (write protect, active low)
- 4 GND
- 5 DI/SI (data in)
- 6 SCK (serial clock)
- 7 HOLD# (hold, active low)
- 8 VCC (power)
Manufacturer
- Manufacturer: Integrated Silicon Solution, Inc. (ISSI).
- What kind of company: A US-based fabless semiconductor company that designs and markets memory products (e.g., serial flash, SRAM/DRAM, etc.).
- What kind of company: A US-based fabless semiconductor company that designs and markets memory products (e.g., serial flash, SRAM/DRAM, etc.).
Application
IS25LP128F-JBLA3-TR is a high-density SPI-NOR flash suitable for:
- Boot code and application firmware storage for MCUs/SoCs
- Execute-in-place (XIP) code storage in embedded systems
- Firmware updates/OTA for IoT devices, consumer electronics, gateways, and industrial equipment
- Data logging, configuration and calibration data storage in industrial controllers, routers, meters
- Code/data storage for printers, digital cameras, set-top boxes, wearable devices
- Any system requiring reliable, non-volatile, high-density flash with fast reads
- Boot code and application firmware storage for MCUs/SoCs
- Execute-in-place (XIP) code storage in embedded systems
- Firmware updates/OTA for IoT devices, consumer electronics, gateways, and industrial equipment
- Data logging, configuration and calibration data storage in industrial controllers, routers, meters
- Code/data storage for printers, digital cameras, set-top boxes, wearable devices
- Any system requiring reliable, non-volatile, high-density flash with fast reads
Package
8-pin SOP (SOIC-8) package; Tape-and-Reel (TR) version.
