Abbildungen dienen nur als Referenz
IS42S83200J-7TLI
+StücklisteIC DRAM 256MBIT PAR 54TSOP II
-
HerstellerISSI, Integrated Silicon Solution Inc.
-
Herstellerteil #IS42S83200J-7TLI
-
Auf Lager2246
365 Tage Qualitätsgarantie
7*24 Stunden-Servicegarantie
90-Tage Kundendienstgarantie
Originalproduktgarantie
Spezifikationen
| Attribut | Wert |
| Part Status | Active |
| Base Product Number | IS42S83200 |
| Digi Key Programmable | Not Verified |
| Memory Type | Volatile |
| Memory Format | DRAM |
| Technology | SDRAM |
| Memory Size | 256Mbit |
| Memory Organization | 32M x 8 |
| Memory Interface | Parallel |
| Clock Frequency | 143 MHz |
| Voltage - Supply | 3V ~ 3.6V |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Mounting Type | Surface Mount |
| Package / Case | 54-TSOP (0.400", 10.16mm Width) |
| Supplier Device Package | 54-TSOP II |
| Packaging | Tray |
| Access Time | 5.4 ns |
Übersicht
Description
IS42S83200J-7TLI is an ISSI synchronous DRAM (SDRAM) device from the IS42S family. It is a high-density, multi-bank memory intended for system RAM/graphics/embedded memory subsystems, accessed via a clocked, multiplexed address/command interface under a memory controller.
Key points:
- Speed grade: -7 (typical 7 ns)
- Data interface: wide data bus (often 32-bit, with other density/organization options in the same family)
- Core features: auto-refresh, multi-bank operation, standard SDRAM timing (tRCD, tRP, tCAS, tREF), and low-power modes
- Packaging/alias: suffixes (such as -7TLI) indicate package/RoHS/lead-free options and packaging variant
Voltage and exact organization (e.g., density, x8/x32 data width), as well as precise timing parameters, vary by part revision. For accurate specs, timing diagrams, and electrical characteristics, refer to the official IS42S83200J-7TLI datasheet from ISSI.
Key points:
- Speed grade: -7 (typical 7 ns)
- Data interface: wide data bus (often 32-bit, with other density/organization options in the same family)
- Core features: auto-refresh, multi-bank operation, standard SDRAM timing (tRCD, tRP, tCAS, tREF), and low-power modes
- Packaging/alias: suffixes (such as -7TLI) indicate package/RoHS/lead-free options and packaging variant
Voltage and exact organization (e.g., density, x8/x32 data width), as well as precise timing parameters, vary by part revision. For accurate specs, timing diagrams, and electrical characteristics, refer to the official IS42S83200J-7TLI datasheet from ISSI.
Features
Here are the typical features of IS42S83200J-7TLI (summary):
- Density/organization: High-density SDRAM (~256 Mb; commonly 32M × 8 or 8M × 32)
- Type: Synchronous DRAM (SDRAM)
- Speed grade: -7 (approximately 7 ns)
- Voltage: 3.3V nominal (± tolerance)
- Banks: 4 banks
- Burst: Burst length options (2/4/8), with sequential/interleaved burst modes
- CAS latency: Programmable options (e.g., CL 2/3/4 depending on mode)
- Refresh: Auto-refresh and self-refresh capability
- Packaging: Pb-free TLI package
- Operating temp: Typically -40°C to 85°C (industrial grade variants)
Note: Exact organization, timings, and voltage tolerances depend on the specific mode/register settings and the device revision. For precise specs, consult the datasheet.
- Density/organization: High-density SDRAM (~256 Mb; commonly 32M × 8 or 8M × 32)
- Type: Synchronous DRAM (SDRAM)
- Speed grade: -7 (approximately 7 ns)
- Voltage: 3.3V nominal (± tolerance)
- Banks: 4 banks
- Burst: Burst length options (2/4/8), with sequential/interleaved burst modes
- CAS latency: Programmable options (e.g., CL 2/3/4 depending on mode)
- Refresh: Auto-refresh and self-refresh capability
- Packaging: Pb-free TLI package
- Operating temp: Typically -40°C to 85°C (industrial grade variants)
Note: Exact organization, timings, and voltage tolerances depend on the specific mode/register settings and the device revision. For precise specs, consult the datasheet.
Pinout
Pin count: 84 pins (in the typical TSOP-II package for IS42S83200J-7TLI).
Function: 256 Mb synchronous DRAM with a 32-bit data bus (organized as 8M x 32), banked with typical DRAM control signals (RAS, CAS, WE, CS, CLK, etc.). Note: packaging options can vary; verify the exact package in the datasheet.
Function: 256 Mb synchronous DRAM with a 32-bit data bus (organized as 8M x 32), banked with typical DRAM control signals (RAS, CAS, WE, CS, CLK, etc.). Note: packaging options can vary; verify the exact package in the datasheet.
Manufacturer
Manufacturer: Integrated Silicon Solution, Inc. (ISSI).
What kind of company: ISSI is a fabless semiconductor company that designs and markets memory products (DRAM, SRAM, PSRAM) and outsources fabrication to foundries.
What kind of company: ISSI is a fabless semiconductor company that designs and markets memory products (DRAM, SRAM, PSRAM) and outsources fabrication to foundries.
Application
IS42S83200J-7TLI is a high-density DRAM used as volatile system memory. Typical application areas include:
- Main memory for desktops, notebooks, and servers
- Embedded systems and consumer electronics (set-top boxes, TVs, game consoles)
- Graphics/video frame buffers and display memory
- Buffering/caching in networking and telecom equipment (routers, switches)
- Industrial automation and control systems
- Automotive infotainment (in automotive-qualified variants)
- Main memory for desktops, notebooks, and servers
- Embedded systems and consumer electronics (set-top boxes, TVs, game consoles)
- Graphics/video frame buffers and display memory
- Buffering/caching in networking and telecom equipment (routers, switches)
- Industrial automation and control systems
- Automotive infotainment (in automotive-qualified variants)
Package
TSOP II plastic leaded package, 54-pin.
