Abbildungen dienen nur als Referenz
IC SRAM 8MBIT PARALLEL 44TSOP II
-
HerstellerISSI, Integrated Silicon Solution Inc.
-
Herstellerteil #IS61WV51216EDBLL-10TLI
-
Datenblatt IS61WV51216EDBLL-10TLI DataSheet
-
Paket TSOP-44
-
Auf Lager6277
365 Tage Qualitätsgarantie
7*24 Stunden-Servicegarantie
90-Tage Kundendienstgarantie
Originalproduktgarantie
Spezifikationen
| Attribut | Wert |
| Package / Case | Tray |
| Part Status | Active |
| Memory Type | Volatile |
| Memory Format | SRAM |
| Technology | SRAM - Asynchronous |
| Memory Size | 8Mb (512K x 16) |
| Memory Interface | Parallel |
| Write Cycle Time - Word Page | 10ns |
| Access Time | 10 ns |
| Voltage - Supply | 2.4V ~ 3.6V |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Mounting Type | Surface Mount |
Übersicht
Description
Key specifications include a 10 ns access time, indicating the speed at which data can be read from or written to the memory. It operates with a single supply voltage of 2.7V to 3.6V, which helps in energy-efficient operations. The device supports both standard and burst mode operations, enhancing its flexibility for various applications.
The IS61WV51216EDBLL-10TLI is designed with low-power features, including a deep power-down mode, which reduces power consumption when the device is not in active use. It is packaged in a compact TSSOP (Thin Shrink Small Outline Package) that is suitable for space-constrained designs. Overall, this SRAM offers a reliable solution for high-speed and low-power memory requirements.
Equivalent
1. CY7C1041G by Cypress Semiconductor (Infineon Technologies)
2. AS6C40016 by Alliance Memory
3. W9825G6KH by Winbond
4. K6R4016V1D by Samsung
These alternatives offer similar configurations and power features, though it's important to compare specific parameters like voltage, speed, and package type to ensure compatibility.
Pinout
Key pin functions include:
- Address Pins (A0-A18): These are used to specify the memory location for data access.
- Data Input/Output Pins (DQ0-DQ15): These pins serve as the data bus for reading from or writing to the memory.
- Chip Enable (CE#): This pin is used to activate the chip. When not active, the chip is in a low-power standby mode.
- Output Enable (OE#): Controls the data output buffers and is used during read operations.
- Write Enable (WE#): Allows data to be written to the memory.
- Byte Control Pins (LB#, UB#): Used to select lower or upper byte during data access.
- Power (VCC) and Ground (VSS) Pins: Supply power to the chip.
This combination of features makes it suitable for applications requiring high-speed and low-power memory solutions.