Abbildungen dienen nur als Referenz
JMS578-QGBA0A
+Stückliste-
HerstellerJMicron
-
Herstellerteil #JMS578-QGBA0A
-
Auf Lager23445
365 Tage Qualitätsgarantie
7*24 Stunden-Servicegarantie
90-Tage Kundendienstgarantie
Originalproduktgarantie
Spezifikationen
| Attribut | Wert |
| Manufacturer | JMicron |
| Package / Case | QFN-48 |
Übersicht
Description
The JMS578-QGBA0A is a USB-to-SATA bridge controller chip developed by JMicron Technology. It enables connectivity between SATA storage devices (like HDDs/SSDs) and USB 3.0/2.0 hosts, commonly used in external hard drive enclosures or adapters.
Key features:
- Supports USB 3.0 (5Gbps) and backward-compatible with USB 2.0.
- Compatible with SATA III (6Gbps) storage devices.
- Plug-and-play functionality with UASP (USB Attached SCSI Protocol) for faster data transfers.
- Often found in budget-friendly external storage solutions.
Typical applications include upgrading internal drives to external USB storage or cloning disks. Drivers are usually auto-installed on modern OSes (Windows/macOS/Linux).
For optimal performance, ensure proper power delivery (especially for HDDs) and use USB 3.0+ ports. Check JMicron’s official site for firmware updates if needed.
Key features:
- Supports USB 3.0 (5Gbps) and backward-compatible with USB 2.0.
- Compatible with SATA III (6Gbps) storage devices.
- Plug-and-play functionality with UASP (USB Attached SCSI Protocol) for faster data transfers.
- Often found in budget-friendly external storage solutions.
Typical applications include upgrading internal drives to external USB storage or cloning disks. Drivers are usually auto-installed on modern OSes (Windows/macOS/Linux).
For optimal performance, ensure proper power delivery (especially for HDDs) and use USB 3.0+ ports. Check JMicron’s official site for firmware updates if needed.
Equivalent
The JMS578-QGBA0A is a USB-to-SATA bridge controller. Equivalent or similar chips include:
- JMicron JMS578 (same family, different variant)
- ASMedia ASM1153E
- Realtek RTL9210 (supports NVMe/SATA)
- Initio INIC-3637EN
These chips offer comparable USB 3.0 to SATA bridging functionality. The exact replacement depends on your specific requirements (e.g., speed, features). Always check datasheets for compatibility.
- JMicron JMS578 (same family, different variant)
- ASMedia ASM1153E
- Realtek RTL9210 (supports NVMe/SATA)
- Initio INIC-3637EN
These chips offer comparable USB 3.0 to SATA bridging functionality. The exact replacement depends on your specific requirements (e.g., speed, features). Always check datasheets for compatibility.
Features
The JMS578-QGBA0A is a USB 3.0 to SATA bridge controller by JMicron. Key features:
- USB 3.0 (5Gbps) to SATA III (6Gbps) bridge for HDDs/SSDs.
- Supports UASP (faster than standard USB mass storage).
- TRIM support for SSDs (optimizes performance).
- S.M.A.R.T. monitoring for drive health.
- AES-256 hardware encryption (secure data transfer).
- Plug-and-play (no drivers needed for most OS).
- Low power consumption with advanced power management.
- Compatible with Windows, macOS, and Linux.
Ideal for external enclosures, docking stations, and data recovery tools.
- USB 3.0 (5Gbps) to SATA III (6Gbps) bridge for HDDs/SSDs.
- Supports UASP (faster than standard USB mass storage).
- TRIM support for SSDs (optimizes performance).
- S.M.A.R.T. monitoring for drive health.
- AES-256 hardware encryption (secure data transfer).
- Plug-and-play (no drivers needed for most OS).
- Low power consumption with advanced power management.
- Compatible with Windows, macOS, and Linux.
Ideal for external enclosures, docking stations, and data recovery tools.
Manufacturer
The JMS578-QGBA0A is a USB-to-SATA bridge controller manufactured by JMicron Technology Corp., a Taiwanese company specializing in storage and connectivity ICs.
JMicron is known for producing bridge chips, SSD controllers, and other storage-related solutions. The JMS578 is commonly used in external hard drive enclosures and adapters, offering reliable data transfer between SATA devices and USB hosts.
The company serves both consumer and industrial markets, focusing on cost-effective, high-performance storage interfaces.
JMicron is known for producing bridge chips, SSD controllers, and other storage-related solutions. The JMS578 is commonly used in external hard drive enclosures and adapters, offering reliable data transfer between SATA devices and USB hosts.
The company serves both consumer and industrial markets, focusing on cost-effective, high-performance storage interfaces.
Application
The JMS578-QGBA0A is a USB-to-SATA bridge controller chip primarily used in:
1. External HDD/SSD Enclosures – Enables SATA drives to connect via USB 3.0.
2. Data Recovery Tools – Facilitates direct access to SATA drives for diagnostics.
3. Industrial Storage Solutions – Supports embedded systems requiring USB-SATA bridging.
4. Consumer Electronics – Used in docking stations and adapters for HDD/SSD connectivity.
It offers high-speed data transfer (up to 5Gbps) and is compatible with various operating systems.
1. External HDD/SSD Enclosures – Enables SATA drives to connect via USB 3.0.
2. Data Recovery Tools – Facilitates direct access to SATA drives for diagnostics.
3. Industrial Storage Solutions – Supports embedded systems requiring USB-SATA bridging.
4. Consumer Electronics – Used in docking stations and adapters for HDD/SSD connectivity.
It offers high-speed data transfer (up to 5Gbps) and is compatible with various operating systems.
Package
The JMS578-QGBA0A is a USB 3.0 to SATA bridge controller IC, typically packaged in a QFN-48 (Quad Flat No-leads, 48-pin) form factor. This compact package is suitable for high-speed data transfer applications, commonly used in external hard drive enclosures and adapters. Its small size and efficient thermal performance make it ideal for space-constrained designs.
