LMV393DR2G

LMV393DR2G is TI’s dual low-voltage comparator in an 8-pin package. It’s used for simple threshold and level-sensing tasks in battery-powered systems.
Key features:
- Dual channels with rail-to-rail input and open-drain outputs (pull-ups required)
- Supply range: 2.7 V to 5.5 V
- Industrial temperature range: -40°C to +125°C
- Low quiescent current and fast response for a comparator family
Typical applications:
- Battery monitors, voltage detectors, level sensing, and microcontroller threshold detection
DR2G denotes the specific packaging variant (check TI’s datasheet for exact package type, RoHS, and tape/reel details).
Design notes:
- Use pull-ups on outputs
- Ensure input common-mode stays within the approved range relative to Vcc
- Choose pull-up values to meet speed and voltage requirements
For exact electrical specs and packaging, refer to the TI LMV393DR2G datasheet.

Common equivalents to the TI LMV393DR2G (dual, low‑power comparator, 1.65–5.5 V) include:
- TI TLV393 (same family)
- Analog Devices ADCMP393 (dual comparator, 2.7–5.5 V)
- Microchip MCP6542 (dual, 1.8–5.5 V)
- LM393 (older dual comparator, widely available)
Note: verify pinout, input common‑mode range, and open‑collector outputs before swapping.

Here are the key features of LMV393DR2G:
- Dual, low-power comparators (two channels)
- Open-drain outputs (require external pull-up resistors)
- Single-supply operation (typical use at 3.3V/5V)
- Input common-mode range includes ground
- Low quiescent current per amplifier
- Temperature range: -40°C to 125°C (industrial)
- 8-pin VSSOP package (D2G), with DR2G tape-and-reel option
(Note: For exact voltage ranges, pull-up current, and timing specs, refer to the datasheet.)

- Pin count: 8 pins (8-pin package).
- Function: Dual low-voltage comparator (two independent comparators) with open-drain outputs (requires pull-up resistors).

- Manufacturer: Texas Instruments (TI).
- What kind of company: An American multinational technology company that designs and manufactures semiconductors and analog/mixed-signal integrated circuits, serving global markets with analog, embedded processing, and connectivity products.

LMV393DR2G is a low‑power, dual voltage comparator. Typical applications include:
- Battery-powered voltage monitoring and undervoltage protection
- Power-supply supervision, reset/window comparator circuits
- Threshold sensing for sensors (temperature, light, Hall, etc.)
- Noise-immune signal conditioning and Schmitt-trigger/hysteresis for microcontroller interfaces
- Zero-cross detection, peak-detect, and PWM/control in switching regulators and motor drives
- Small analog front-ends for consumer/ automotive electronics (alarm, proximity, fault detection)
(Uses two comparators per device for multi-threshold or window sensing.)

LMV393DR2G is in an 8-pin VSSOP (Very Small Outline Package) package.