Abbildungen dienen nur als Referenz
MAX491CSD
+StücklisteIC TRANSCEIVER FULL 1/1 14SOIC
-
HerstellerAnalog Devices Inc./Maxim Integrated
-
Herstellerteil #MAX491CSD
-
Auf Lager4587
365 Tage Qualitätsgarantie
7*24 Stunden-Servicegarantie
90-Tage Kundendienstgarantie
Originalproduktgarantie
Spezifikationen
| Attribut | Wert |
| Supplier | Rochester Electronics, LLC,Analog Devices Inc./Maxim Integrated |
| Package | Tube,Tube |
| ProductStatus | Obsolete |
| Type | Transceiver |
| Protocol | RS422, RS485 |
| NumberofDrivers/Receivers | 1/1 |
| Duplex | Full |
| ReceiverHysteresis | 70 mV |
| DataRate | 2.5Mbps |
| Voltage-Supply | 4.75V ~ 5.25V |
| OperatingTemperature | 0°C ~ 70°C |
| MountingType | Surface Mount |
| Package/Case | 14-SOIC (0.154, 3.90mm Width) |
Übersicht
Description
The MAX491CSD is an RS-485/RS-422 transceiver from Maxim Integrated (now Analog Devices). It combines a differential line driver and receiver in an 8-pin package for half‑duplex, multi‑point serial links.
Key points:
- Interfaces: DI (data in), DE (driver‑enable), RO (receiver out), /RE (receiver enable), A/B bus lines.
- Features: fail‑safe receiver (RO stays high when the bus is idle/open/shorted), single‑supply operation, bus‑fault protection and ESD protection, low power.
- Use cases: industrial networks, building automation, data acquisition, and any multi‑drop RS‑485/RS‑422 link.
- Packaging: CSD suffix denotes a specific package/variant in Maxim’s lineup; see the datasheet for exact pinout and electrical specs.
For precise electrical characteristics (data rate, voltage range, protection levels), consult the MAX491CSD datasheet.
Key points:
- Interfaces: DI (data in), DE (driver‑enable), RO (receiver out), /RE (receiver enable), A/B bus lines.
- Features: fail‑safe receiver (RO stays high when the bus is idle/open/shorted), single‑supply operation, bus‑fault protection and ESD protection, low power.
- Use cases: industrial networks, building automation, data acquisition, and any multi‑drop RS‑485/RS‑422 link.
- Packaging: CSD suffix denotes a specific package/variant in Maxim’s lineup; see the datasheet for exact pinout and electrical specs.
For precise electrical characteristics (data rate, voltage range, protection levels), consult the MAX491CSD datasheet.
Equivalent
I need the chip’s function to give exact cross-refs. MAX491CSD could be an RS-232, RS-485/RS-422 transceiver, etc., with specific voltage and package. Please share the datasheet or confirm: 1) interface (RS-232 or RS-485/422), 2) supply (3.3V/5V) and package. With that, I’ll list direct equivalents from TI, Analog Devices, ON Semiconductor, etc., concise one-liners.
Pinout
- Pin count: 8 pins (8‑pin package, e.g., SOIC‑8/TSSOP‑8).
- Function: High‑side load switch. It connects VIN to VOUT to power a load, with enable control (EN), current‑limit protection, and overcurrent/thermal protection. It uses pins for VIN, VOUT, EN, GND, and current‑limit setting.
- Function: High‑side load switch. It connects VIN to VOUT to power a load, with enable control (EN), current‑limit protection, and overcurrent/thermal protection. It uses pins for VIN, VOUT, EN, GND, and current‑limit setting.
Manufacturer
- Manufacturer: Maxim Integrated (now part of Analog Devices, Inc.).
- What kind of company: A US-based fabless semiconductor company that designs and markets analog and mixed-signal integrated circuits.
- What kind of company: A US-based fabless semiconductor company that designs and markets analog and mixed-signal integrated circuits.
Application
Typical application areas for MAX491CSD:
- Analog signal routing and multiplexing in data acquisition, instrumentation, and control systems
- Signal paths in automotive and industrial sensors and instrumentation
- Audio/video routing and switching in consumer electronics and professional equipment
- Test and measurement equipment for channel selection and signal switching
- Portable, battery-powered devices requiring low on-resistance and low power
- Telecommunication front ends and other circuit blocks needing simple analog switching
- Analog signal routing and multiplexing in data acquisition, instrumentation, and control systems
- Signal paths in automotive and industrial sensors and instrumentation
- Audio/video routing and switching in consumer electronics and professional equipment
- Test and measurement equipment for channel selection and signal switching
- Portable, battery-powered devices requiring low on-resistance and low power
- Telecommunication front ends and other circuit blocks needing simple analog switching
Package
MAX491CSD uses an 8-pin SOIC (Small Outline IC) package, i.e., an 8-pin surface-mount package.
