Abbildungen dienen nur als Referenz
MCP6541T-I/OT
+StücklisteIC COMP PUSHPLL 1.6V SGL SOT23-5
-
HerstellerMikrochip-Technologie
-
Herstellerteil #MCP6541T-I/OT
-
Datenblatt MCP6541T-I/OT DataSheet
-
Paket SOT-23
-
Auf Lager3785
365 Tage Qualitätsgarantie
7*24 Stunden-Servicegarantie
90-Tage Kundendienstgarantie
Originalproduktgarantie
Spezifikationen
| Attribut | Wert |
| Package / Case | Tape & Reel (TR),Cut Tape (CT) |
| Part Status | Active |
| Type | General Purpose |
| Number of Elements | 1 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Voltage - Supply, Single/Dual (±) | 1.6V ~ 5.5V |
| Voltage - Input Offset (Max) | 7mV @ 5.5V |
| Current - Input Bias(Max) | 1pA @ 5.5V |
| Current - Output (Typ) | 30mA |
| Current - Quiescent (Max) | 1µA |
| CMRRPSRR(Typ) | 70dB CMRR, 80dB PSRR |
| Propagation Delay(Max) | 8µs |
| Hysteresis | 6.5mV |
| Operating Temperature | -40°C ~ 85°C |
| Mounting Type | Surface Mount |
Übersicht
Description
The MCP6541T-I/OT is a single-channel, low-power comparator from Microchip Technology. It operates within a wide voltage range of 1.6V to 5.5V, making it suitable for battery-powered applications. This comparator features an open-drain output, allowing it to be used in wired-AND configurations by connecting an external pull-up resistor. It offers a low quiescent current, optimizing power efficiency, especially in portable and energy-sensitive applications.
This device is characterized by its fast response time and low propagation delay, providing reliable performance for rapid signal processing. The MCP6541T-I/OT is designed to work in various environments with its extended industrial temperature range of -40°C to +85°C. Packaged in a compact SOT-23-5, it is ideal for space-constrained applications.
With its combination of low power consumption, wide voltage range, and small package, the MCP6541T-I/OT is suitable for use in consumer electronics, automotive, and industrial applications where precise and efficient signal comparison is required.
This device is characterized by its fast response time and low propagation delay, providing reliable performance for rapid signal processing. The MCP6541T-I/OT is designed to work in various environments with its extended industrial temperature range of -40°C to +85°C. Packaged in a compact SOT-23-5, it is ideal for space-constrained applications.
With its combination of low power consumption, wide voltage range, and small package, the MCP6541T-I/OT is suitable for use in consumer electronics, automotive, and industrial applications where precise and efficient signal comparison is required.
Equivalent
The MCP6541T-I/OT is a single, push-pull output comparator by Microchip. Equivalent products include the LMV331 by Texas Instruments, the TS881 from STMicroelectronics, and the TLV1701 also by Texas Instruments. These alternatives offer similar functionalities like low power consumption and operational voltage ranges, but always verify the specific electrical characteristics and package compatibility to ensure they meet your design requirements.
Features
The MCP6541T-I/OT is a single, push-pull output comparator designed by Microchip Technology. It operates with a low supply current, making it ideal for battery-powered applications. Key features include a wide supply voltage range from 1.8V to 5.5V, allowing it to be used in various systems. The device offers a fast response time with a typical propagation delay of 4 µs at a 5V operating voltage, enhancing performance in time-sensitive applications.
The MCP6541T-I/OT provides a rail-to-rail input and output, ensuring maximum signal range utilization. It also includes a push-pull output stage, delivering better drive capability compared to open-drain configurations. This comparator is available in a compact SOT-23-5 package, contributing to space savings on PCBs. Additionally, it features a low input bias current and low input offset voltage, enhancing accuracy and efficiency. Its operating temperature range of -40°C to +85°C makes it suitable for industrial applications. Overall, the MCP6541T-I/OT is a versatile and efficient solution for various low-power and portable electronic applications.
The MCP6541T-I/OT provides a rail-to-rail input and output, ensuring maximum signal range utilization. It also includes a push-pull output stage, delivering better drive capability compared to open-drain configurations. This comparator is available in a compact SOT-23-5 package, contributing to space savings on PCBs. Additionally, it features a low input bias current and low input offset voltage, enhancing accuracy and efficiency. Its operating temperature range of -40°C to +85°C makes it suitable for industrial applications. Overall, the MCP6541T-I/OT is a versatile and efficient solution for various low-power and portable electronic applications.
Pinout
The MCP6541T-I/OT is a single-channel comparator from Microchip Technology. It typically comes in a 5-pin SOT-23 package. The functions of the pins are as follows:
1. VDD (Pin 5): This is the supply voltage pin. You connect your positive supply voltage here.
2. VSS (Pin 3): This is the ground pin, connected to the negative supply voltage or ground reference.
3. IN+ (Pin 2): Non-inverting input of the comparator. The voltage at this pin is compared to the voltage at the inverting input.
4. IN- (Pin 4): Inverting input of the comparator. This is compared against the non-inverting input.
5. OUT (Pin 1): Output pin. The output will swing to near VDD or VSS depending on which input is higher.
This device is known for its low power consumption and is suitable for applications requiring low voltage operation.
1. VDD (Pin 5): This is the supply voltage pin. You connect your positive supply voltage here.
2. VSS (Pin 3): This is the ground pin, connected to the negative supply voltage or ground reference.
3. IN+ (Pin 2): Non-inverting input of the comparator. The voltage at this pin is compared to the voltage at the inverting input.
4. IN- (Pin 4): Inverting input of the comparator. This is compared against the non-inverting input.
5. OUT (Pin 1): Output pin. The output will swing to near VDD or VSS depending on which input is higher.
This device is known for its low power consumption and is suitable for applications requiring low voltage operation.
Manufacturer
The manufacturer of the MCP6541T-I/OT is Microchip Technology Inc. Microchip Technology is a leading semiconductor company that designs and manufactures a wide range of microcontrollers, mixed-signal, analog, and Flash-IP integrated circuits. It primarily serves the automotive, consumer, industrial, communications, and computing markets. The company is known for providing embedded control solutions and focuses on delivering products that offer high performance, reliability, and ease of use to its customers.
Application
The MCP6541T-I/OT is a single, low-power, push-pull output comparator designed for use in various applications. Key application areas include:
1. Signal Conditioning: Used in circuits requiring voltage level detection and signal comparison.
2. Zero-Crossing Detectors: Ideal for AC signal processing by identifying the zero-crossing points.
3. Oscillator Circuits: Facilitates the creation of square wave signals in timer and clock applications.
4. Battery-Powered Devices: Suited for power-sensitive applications due to its low-power consumption.
5. Sensor Interfaces: Used to interpret sensor outputs for applications like temperature or light detection.
6. Threshold Detectors: Employed in circuits to trigger actions when signals exceed defined thresholds.
Its small size and wide voltage range make it versatile in various compact electronic applications.
1. Signal Conditioning: Used in circuits requiring voltage level detection and signal comparison.
2. Zero-Crossing Detectors: Ideal for AC signal processing by identifying the zero-crossing points.
3. Oscillator Circuits: Facilitates the creation of square wave signals in timer and clock applications.
4. Battery-Powered Devices: Suited for power-sensitive applications due to its low-power consumption.
5. Sensor Interfaces: Used to interpret sensor outputs for applications like temperature or light detection.
6. Threshold Detectors: Employed in circuits to trigger actions when signals exceed defined thresholds.
Its small size and wide voltage range make it versatile in various compact electronic applications.
Package
The MCP6541T-I/OT is a single comparator from Microchip Technology, housed in a SOT-23-5 package. It is designed for applications requiring low power consumption and operates over a wide voltage range. It features a push-pull output and is suitable for use in battery-powered devices due to its low quiescent current.
