MP1601GTF-Z

The MP1601GTF-Z is a high-performance, low-dropout (LDO) voltage regulator from Monolithic Power Systems (MPS). It delivers a fixed or adjustable output voltage with high accuracy, low noise, and excellent transient response. Key features include:
- Input Voltage Range: Up to 16V
- Output Voltage: Adjustable (0.8V to 12V) or fixed options
- Output Current: Up to 1A
- Low Dropout: Typically 300mV at full load
- High PSRR: Up to 70dB at 1kHz
- Protections: Overcurrent, overtemperature, and reverse current
Designed for space-constrained applications, it comes in a small TSOT23-5 package, making it ideal for portable devices, IoT, and industrial systems. Its low quiescent current (~40µA) enhances efficiency in battery-powered designs.
For detailed specs, refer to the MP1601GTF-Z datasheet on MPS’s website.

Equivalent products to the MP1601GTF-Z (a step-down DC-DC converter by MPS) include:
- MP2307 (MPS)
- LM2675 (Texas Instruments)
- AP62300 (Diodes Incorporated)
- SY8303 (Silergy)
These are synchronous buck converters with similar specs (e.g., input voltage, output current). Verify pin compatibility and electrical characteristics for your design.

The MP1601GTF-Z is a high-efficiency, synchronous step-down converter with the following key features:
- Input Voltage Range: 4.5V to 18V
- Output Voltage Range: 0.6V to 15V (adjustable)
- Output Current: Up to 6A
- High Efficiency: Up to 95% (with integrated MOSFETs)
- Switching Frequency: 500kHz (fixed)
- Protections: Over-current (OCP), over-voltage (OVP), under-voltage lockout (UVLO), and thermal shutdown
- Package: Compact QFN-16 (3x3mm)
- Low Quiescent Current: 40µA (light load)
- Soft-Start & Power Good Indicator
Ideal for industrial, telecom, and consumer electronics requiring high power density.

The MP1601GTF-Z is a 6-pin synchronous step-down DC-DC converter.
Pin Functions:
1. VIN – Input voltage (2.5V to 6V).
2. GND – Ground.
3. EN – Enable control (high = on, low = off).
4. SW – Switching node (connects to inductor).
5. FB – Feedback for output voltage regulation.
6. PG – Power-good indicator (open-drain output).
It provides up to 1A output current with high efficiency and integrated power MOSFETs.

The MP1601GTF-Z is a DC-DC buck converter manufactured by Monolithic Power Systems (MPS), a leading semiconductor company specializing in high-performance power solutions.
MPS is a U.S.-based company (headquartered in San Jose, California) known for its efficient, compact power management ICs used in computing, automotive, industrial, and consumer electronics. The company is recognized for innovation in power efficiency and integration.
The MP1601GTF-Z is a synchronous step-down converter with a wide input range (4.5V–36V) and high efficiency, making it suitable for applications like industrial systems, networking, and telecom.
For detailed specs, refer to MPS's official datasheet.

The MP1601GTF-Z is a DFN (Dual Flat No-lead) package type. It features a compact, lead-free design with exposed thermal pads for efficient heat dissipation, commonly used in power management applications. The package dimensions are typically small, making it suitable for space-constrained PCB designs. Exact specs (e.g., pin count, size) should be verified in the datasheet.