MX29F800CTTI-70G

Abbildungen dienen nur als Referenz

MX29F800CTTI-70G

+Stückliste

IC FLASH 8MBIT PARALLEL 48TSOP

  • HerstellerMakronix

  • Herstellerteil #MX29F800CTTI-70G

  • Auf Lager7237

365 Tage Qualitätsgarantie

7*24 Stunden-Servicegarantie

90-Tage Kundendienstgarantie

Originalproduktgarantie

Spezifikationen

Attribut Wert
Series MX29F
Part Status Active
Base Product Number MX29F800
DigiKey Programmable Not Verified
Memory Type Non-Volatile
Memory Format FLASH
Technology FLASH - NOR
Memory Size 8Mbit
Memory Organization 1M x 8
Memory Interface Parallel
Write Cycle Time - Word, Page 70ns
Voltage - Supply 4.5V ~ 5.5V
Operating Temperature -40°C ~ 85°C (TA)
Mounting Type Surface Mount
Package 48-TFSOP (0.724", 18.40mm Width)
Supplier Device Package 48-TSOP
Packaging Tray
Access Time 70 ns

Übersicht

Description

MX29F800CTTI-70G is Macronix’s 8‑Mbit parallel NOR flash memory. It is designed to store firmware and code data for embedded systems and microcontrollers, often as a drop‑in replacement for mask ROM or external boot code.
Key points:
- Capacity and width: 8 Mbit (1 MB); data can be accessed in x8 (and x16 in some configurations) modes.
- Interface and timing: parallel NOR flash with a standard asynchronous read/write/erase command set; 70 ns read access time (speed grade).
- Voltage: typically operates from 3.0–3.6 V (commonly 3.3 V systems).
- Organization: commonly organized as 1,048,576 × 8; supports block/sector erase and programming.
- Package: available in Macronix CTTI packaging variant (specific packaging can vary by lot).
- Applications: boot firmware, code storage for embedded MCUs, firmware updates.
Considerations:
- Plan erase/program cycles (endurance ~10^4–10^6 cycles depending on conditions).
- Use the datasheet for exact command sequences, block sizes, and timing.

Equivalent

MX29F800CTTI-70G is Macronix 8-Mbit, 5V NOR flash, 70 ns, TSOP-32 (CTTI). There is no universal 1:1 cross. Equivalent parts from other vendors exist for similar specs (8-Mbit, 70 ns NOR flash). To give precise substitutes, please confirm voltage (5V/3.3V) and package (TSOP32/PLCC32). I can then provide exact cross-reference part numbers from Winbond, Spansion/Cypress, ISSI, etc.

Features

Here are the main features of MX29F800CTTI-70G (Macronix 8-Mbit NOR Flash):
- Memory: 8 Mbit NOR flash
- Speed: 70 ns random access read
- Voltage: 5V single-supply operation (typical 4.5–5.5V)
- Interface: Parallel 8-bit data bus
- Operations: Read, program (word/byte), erase
- Erase/Program: Block/sector erase and byte/word programming with standard command set
- Endurance: Typically ~100,000 program/erase cycles
- Data retention: ≥10 years
- Packaging: CTTI-70G (industrial packaging variant)
Note: exact block sizes, temperature range, and additional mode details are specified in the full datasheet.

Pinout

- Pin count: 32 pins (32‑pin TSOP/SOP package)
- Function: 8‑Mbit parallel NOR flash memory (MX29F800CTTI-70G), 3.0V operation, 70 ns access. Provides 8‑bit data I/O (DQ0–DQ7), address inputs (A0…), and control pins CE#, OE#, WE#, plus Vcc and Vss. Used for non-volatile storage/firmware.

Manufacturer

Manufacturer: Macronix International Corp., Ltd. (MXIC).
Company type: A Taiwan-based semiconductor company that designs and manufactures non-volatile memory ICs, including NOR and NAND flash and ROM, for embedded systems, consumer electronics, and automotive applications.

Application

MX29F800CTTI-70G is an 8-Mbit NOR flash memory used for non-volatile program storage in embedded systems. Typical applications:
- Boot ROM and firmware storage for microcontrollers/DSPs
- Firmware updates
- Consumer electronics (set-top boxes, DVD players, cameras, printers)
- Automotive ECUs and infotainment
- Industrial controls and PLCs
- Networking hardware (routers/switches)
- Medical devices requiring reliable firmware storage
(70G signifies speed grade; CT-TI packaging variant.)

Package

MX29F800CTTI-70G comes in a 48‑pin TSOP II plastic package.

Frequently Asked Questions


Q: What is the memory density and organization of the MX29F800CTTI-70G?
A: It has an 8Mbit density organized as 1M x 8 bits, suitable for byte-wide parallel data access.


Q: What is the access time and operating voltage for this NOR Flash?
A: Access time is 70 ns, and the supply voltage range is 4.5V to 5.5V, typical for 5V parallel Flash.


Q: Is this component suitable for industrial temperature applications?
A: Yes, it operates from -40°C to +85°C, making it ideal for industrial and automotive environments.


Q: What is the memory interface type and programming speed?
A: It uses a parallel interface with a 70ns write cycle time per word or page, ensuring fast data writing.


Q: Is the MX29F800CTTI-70G a surface mount device, and what is its package?
A: Yes, it is surface mount in a 48-TFSOP (18.40mm width) package, with the supplier device package being 48-TSOP.


Q: Is this Flash memory non-volatile and does it retain data without power?
A: Yes, it is a non-volatile NOR Flash memory, retaining stored data even when power is removed.


Produkte, die mit MX29F800CTTI-70G zusammenhängen