NCV4275CDT33RKG

NCV4275CDT33RKG is an automotive-grade CAN transceiver from NXP (NCV4275 family). It sits between a CAN controller and the physical CAN bus, translating the controller’s TX/RX signals to the differential CAN_H and CAN_L lines and providing bus protection.
Key points:
- Purpose: robust CAN bus interface with fault protection and diagnostics.
- Features (typical): standby/sleep mode, short‑circuit and overvoltage protection, ESD protection, and operation over automotive temperature ranges.
- Package/suffix: 8-pin small-outline (DT) package; suffixes like “33RKG” reflect packaging, voltage family, and reel options.
- Applications: automotive ECUs, body/control modules, and industrial CAN networks.
Note: exact electrical specs (supply voltage, bus speed support, current limits, pinout, and temperature range) are specified in the official datasheet. If you’re selecting this part, verify the datasheet or distributor listing for the precise variant details.

Key features of NCV4275CDT33RKG (3.3V version, automotive-grade)
- MCU reset supervisor with built-in watchdog timer
- Power-on reset (POR) with defined reset delay
- Manual reset input (MR) for external push-button
- Reset output (active-low RESET#) with fast response
- Very low quiescent current
- Wide operating temperature: -40°C to 125°C
- Automotive-grade (AEC-Q100 qualified)
- 8-pin package (DT) with tape-and-reel options
Note: exact thresholds, timers, and pinout are variant-dependent; consult the datasheet for precise electrical characteristics.

Pin count: 8 pins (8-pin package, e.g., SOIC-8).
Function: 3.3V CAN transceiver (CAN physical layer). Interfaces the CAN controller (TXD, RXD) to the CAN bus (CANH, CANL) with VCC and GND, and includes a standby/enable control.

- Manufacturer: Onsemi (ON Semiconductor Corporation)
- What kind of company: A global American semiconductor company that designs, manufactures, and sells ICs and silicon solutions (including power management, sensors, and other semiconductor devices) for automotive, industrial, and consumer electronics.

NCV4275CDT33RKG is a 3.3‑V fixed‑output voltage regulator (automotive grade). Typical application areas include:
- Automotive ECUs (engine, body, gateway, infotainment) needing a stable 3.3‑V rail
- Sensors, transceivers, and microcontrollers in automotive/industrial equipment
- Industrial automation and outdoor equipment requiring rugged 3.3‑V regulation
- Battery-powered IoT devices and harsh‑environment applications
- Any system needing a compact, reliable 3.3‑V regulator (AEC/Q100 qualified)

DT indicates an 8‑pin surface‑mount package (SOIC‑8/TSSOP‑8 family) for the NCV4275CDT33RKG.