Abbildungen dienen nur als Referenz
RLB0914-102KL
+StücklisteFIXED IND 1MH 420MA 2.1 OHM TH
-
HerstellerBourns Inc.
-
Herstellerteil #RLB0914-102KL
-
Auf Lager10699
365 Tage Qualitätsgarantie
7*24 Stunden-Servicegarantie
90-Tage Kundendienstgarantie
Originalproduktgarantie
Spezifikationen
| Attribut | Wert |
| Series | RLB |
| PartStatus | Active |
| BaseProductNumber | RLB0914 |
| Type | Drum Core, Wirewound |
| Material-Core | Ferrite |
| Inductance | 1 mH |
| Tolerance | ±10% |
| CurrentRating(Amps) | 420 mA |
| Current-Saturation(Isat) | 650mA |
| Shielding | Unshielded |
| DCResistance(DCR) | 2.1Ohm Max |
| Q@Freq | 40 @ 252kHz |
| Frequency-SelfResonant | 1.3MHz |
| OperatingTemperature | -40°C ~ 125°C |
| InductanceFrequency-Test | 252 kHz |
| MountingType | Through Hole |
| Package | Radial, Vertical Cylinder |
| Size/Dimension | 0.343" Dia (8.70mm) |
| Height-Seated(Max) | 0.512" (13.00mm) |
| Packaging | Bulk |
Übersicht
Description
RLB0914-102KL is a ceramic multilayer capacitor (MLCC). The code 102 means a nominal capacitance of 1,000 pF (1 nF); the “K” indicates ±10% tolerance. The “RLB0914” prefix identifies the series/footprint style, but exact dimensions and termination depend on the manufacturer. This type is commonly used for decoupling and filtering close to ICs, stabilizing supply rails or shaping signals. The dielectric material (e.g., X7R, NP0) and the rated voltage are specified by the vendor in the datasheet. For precise electrical, mechanical, and footprint details, please share the manufacturer or a datasheet/link and I’ll summarize the exact specs.
Features
I don’t have the exact datasheet on hand. RLB0914-102KL appears to be a fixed resistor in the RLB0914 family. Key features you’d typically expect (manufacturer may vary):
- Resistance: 1 kΩ (code 102)
- Tolerance: ±10% (K)
- Package: RLB0914 style (surface-mount, size around 9.1 × 4.0 mm; exact dims depend on maker)
- Power rating: usually in the 0.25–0.5 W range (depends on the specific part)
- Temperature range: commonly -55°C to +125°C
- Construction: thick-film, RoHS-compliant
- Applications: general-purpose or voltage/divider networks in consumer/industrial electronics
For precise features (exact power rating, exact dimensions, TCR, endurance specs, and any automotive/industrial variants), please share the manufacturer or a datasheet link and I’ll extract the exact specs.
- Resistance: 1 kΩ (code 102)
- Tolerance: ±10% (K)
- Package: RLB0914 style (surface-mount, size around 9.1 × 4.0 mm; exact dims depend on maker)
- Power rating: usually in the 0.25–0.5 W range (depends on the specific part)
- Temperature range: commonly -55°C to +125°C
- Construction: thick-film, RoHS-compliant
- Applications: general-purpose or voltage/divider networks in consumer/industrial electronics
For precise features (exact power rating, exact dimensions, TCR, endurance specs, and any automotive/industrial variants), please share the manufacturer or a datasheet link and I’ll extract the exact specs.
Pinout
I don’t have a definitive datasheet for RLB0914-102KL. The pin count and function vary by vendor and package. Please provide the manufacturer or a datasheet link, and I’ll extract the exact pin count and each pin’s function.
Application
I can’t identify RLB0914-102KL without a datasheet or manufacturer. Please share the brand or a link. If it’s a resistor (102K ≈ 1 kΩ, ±10%), typical uses include voltage dividers, pull-up/pull-down networks, and timing circuits. If it’s a polyfuse or ferrite/bead, typical uses are circuit protection or EMI/HF filtering. Once you provide the exact part, I’ll give precise application areas.
Package
SMD chip package — 0914 size (approximately 0.9 mm × 1.4 mm).
