Abbildungen dienen nur als Referenz
S25FL032P0XMFI013
+StücklisteIC FLASH 32MBIT SPI/QUAD 8SOIC
-
HerstellerCypress Semiconductor Corp.
-
Herstellerteil #S25FL032P0XMFI013
-
Datenblatt S25FL032P0XMFI013 DataSheet
-
Paket SOIC-8
-
Auf Lager2005
365 Tage Qualitätsgarantie
7*24 Stunden-Servicegarantie
90-Tage Kundendienstgarantie
Originalproduktgarantie
Spezifikationen
| Attribut | Wert |
| Package | Tape & Reel (TR) |
| Series | FL-P |
| ProductStatus | Obsolete |
| MemoryType | Non-Volatile |
| MemoryFormat | FLASH |
| Technology | FLASH - NOR |
| MemorySize | 32Mb (4M x 8) |
| MemoryInterface | SPI - Quad I/O |
| ClockFrequency | 104 MHz |
| WriteCycleTime-WordPage | 5µs, 3ms |
| Voltage-Supply | 2.7V ~ 3.6V |
| OperatingTemperature | -40°C ~ 85°C (TA) |
| MountingType | Surface Mount |
| Package/Case | 8-SOIC (0.209, 5.30mm Width) |
Übersicht
Description
Key features include a Serial Peripheral Interface (SPI) for communication, offering high-speed data transfer rates. It supports a standard two-wire SPI protocol, as well as dual and quad SPI modes, enabling faster data throughput. The memory is organized into uniform 64 KB sectors, and it provides a flexible erase capability with support for sector-based, block-based, and full-chip erase operations.
The S25FL032P0XMFI013 also includes advanced security features such as hardware-based write protection and software-managed block protection to prevent accidental data modification. Its endurance and reliability are bolstered by support for up to 100,000 program/erase cycles per sector. The device is commonly used in embedded systems, consumer electronics, and industrial applications.
Equivalent
1. Winbond W25Q32JV - 32-Mb SPI NOR Flash.
2. Micron MT25QL032 - 32-Mb SPI NOR Flash.
3. Macronix MX25L3206E - 32-Mb SPI NOR Flash.
4. Adesto/AT25SF321 - 32-Mb SPI NOR Flash.
These alternatives offer similar storage capacities and SPI interface, but it's important to verify compatibility with specific system requirements.
Features
1. Memory Density: 32 Mbit (4 MB) capacity.
2. Interface: SPI (Serial Peripheral Interface) for efficient data transfer.
3. Performance: Supports single, dual, and quad I/O modes for fast operation.
4. Speed: Clock frequency up to 104 MHz, enabling rapid data access.
5. Programming: Page programming of 256 bytes and sector erase capability.
6. Erase/Write Cycles: Endures up to 100,000 program/erase cycles.
7. Data Retention: Offers data retention of 20 years, ensuring long-term reliability.
8. Operating Voltage: Wide voltage range from 2.7V to 3.6V.
9. Temperature Range: Operates effectively between -40°C to +85°C.
10. Security: Includes hardware and software write protection features.
11. Package: Available in standard industry package options for ease of integration.
These features make the S25FL032P0XMFI013 suitable for use in a variety of applications, including automotive, industrial, and consumer electronics.
Pinout
1. CS# (Chip Select): Used to select the device. It must be low to enable the device and high to disable it.
2. SO (Serial Output): Serial data output pin. Data is shifted out on this pin.
3. WP# (Write Protect): Used to protect the device from unintended write operations.
4. VSS (Ground): Ground reference for power supply.
5. SI (Serial Input): Serial data input pin. Data is shifted in on this pin.
6. SCK (Serial Clock): Provides the clock signal for communication.
7. HOLD#: Used to pause serial communication without deselecting the device.
8. VCC (Supply Voltage): Power supply pin for the device.
These pins facilitate the device's operations, including read, write, and erase functions, by supporting standard SPI (Serial Peripheral Interface) communication.
Manufacturer
Application
1. Consumer Electronics: Used in devices like digital cameras, media players, and TVs for firmware and settings storage.
2. Industrial Equipment: Used for data logging, parameter storage, and firmware updates in automation systems.
3. Automotive: Suitable for infotainment systems and other electronic control units (ECUs).
4. Networking Equipment: Implements configuration storage in routers and switches.
5. Embedded Systems: Provides boot code and configuration data storage in microcontroller-based systems.