Abbildungen dienen nur als Referenz
S29JL032J70TFI320
+StücklisteIC FLASH 32MBIT PARALLEL 48TSOP
-
HerstellerCypress Semiconductor Corp.
-
Herstellerteil #S29JL032J70TFI320
-
Datenblatt S29JL032J70TFI320 DataSheet
-
Paket TSOP-48
-
Auf Lager1312
365 Tage Qualitätsgarantie
7*24 Stunden-Servicegarantie
90-Tage Kundendienstgarantie
Originalproduktgarantie
Spezifikationen
| Attribut | Wert |
| Package / Case | Bulk,Tray |
| Series | JL-J |
| Part Status | Active |
| Memory Type | Non-Volatile |
| Memory Format | FLASH |
| Technology | FLASH - NOR |
| Memory Size | 32Mb (4M x 8, 2M x 16) |
| Memory Interface | Parallel |
| Write Cycle Time - Word Page | 70ns |
| Access Time | 70 ns |
| Voltage - Supply | 2.7V ~ 3.6V |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Mounting Type | Surface Mount |
Übersicht
Description
Equivalent
1. Micron: MT28F320J3
2. Winbond: W29GL032
3. Microchip: SST39VF3201
Ensure compatibility by checking datasheets for pin configuration, voltage levels, and memory architecture.
Features
1. Memory Size: 32 Megabits (4 Megabytes).
2. Architecture: 3V-only, single supply flash memory with uniform sector architecture.
3. Interface: Asynchronous read and write operations.
4. Access Time: 70 nanoseconds.
5. Sector Erase Architecture: Uniform 64 Kbyte sectors.
6. Endurance: Minimum 100,000 erase cycles per sector.
7. Data Retention: Minimum 20 years.
8. Package: Typically available in TSOP (Thin Small Outline Package) or BGA (Ball Grid Array).
9. Temperature Range: Industrial temperature range from -40°C to +85°C.
10. Additional Features: Supports common flash interface (CFI) for compatibility, hardware reset pin (RESET#), and Advanced Sector Protection for security.
These features make it suitable for a range of applications including automotive, industrial, consumer electronics, and networking devices where non-volatile memory storage is required.
Pinout
Pin Count and Function:
- Pin Count: 48 pins
- Functions:
- Address Pins (A0-A21): Used to specify the memory address for data access.
- Data Pins (DQ0-DQ15): Used for data input/output; operates as a 16-bit data bus.
- Chip Enable (CE#): Activates the chip for read/write operations.
- Output Enable (OE#): Enables the output buffer to read data.
- Write Enable (WE#): Controls writing to the memory.
- Reset (RESET#): Resets the device.
- Write Protect (WP#): Protects certain memory sectors from being written.
- BYTE#: Selects 8-bit or 16-bit mode.
- Vcc and Vss Pins: Power supply and ground connections.
This chip is designed for embedded applications requiring non-volatile storage.