Abbildungen dienen nur als Referenz
S34ML02G100TFI000
+StücklisteIC FLASH 2GBIT PARALLEL 48TSOP I
-
HerstellerCypress Semiconductor Corp.
-
Herstellerteil #S34ML02G100TFI000
-
Paket TSOP-48
-
Auf Lager6220
365 Tage Qualitätsgarantie
7*24 Stunden-Servicegarantie
90-Tage Kundendienstgarantie
Originalproduktgarantie
Spezifikationen
| Attribut | Wert |
| Package / Case | Tray,Tray |
| Series | ML-1 |
| Part Status | Active |
| Memory Type | Non-Volatile |
| Memory Format | FLASH |
| Technology | FLASH - NAND |
| Memory Size | 2Gb (256M x 8) |
| Memory Interface | Parallel |
| Write Cycle Time - Word Page | 25ns |
| Voltage - Supply | 2.7V ~ 3.6V |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Mounting Type | Surface Mount |
Übersicht
Description
Key characteristics include fast read and write operations, with page sizes commonly at 2048 bytes plus spare bytes for error correction. The S34ML02G100TFI000 is used in various applications such as solid-state drives, embedded systems, and consumer electronics where robust data storage solutions are required. Its industrial temperature range and packaging options make it suitable for use in demanding environments. Overall, the S34ML02G100TFI000 balances storage capacity, performance, and durability, making it a reliable choice for diverse storage needs.
Equivalent
Features
Key features include:
1. Page Size: 2048 + 64 bytes, allowing efficient data management and storage.
2. Block Size: 128 KB + 4 KB, supporting high-density data storage.
3. Interface: Supports a standard NAND interface, making it compatible with various controllers and systems.
4. Endurance: Typically up to 100,000 program/erase cycles, offering robust performance for industrial applications.
5. Package: Available in a 48-pin TSOP (Thin Small Outline Package), facilitating compact design integration.
6. Error Correction: Requires external ECC (Error Correction Code) to ensure data integrity.
Overall, the S34ML02G100TFI000 is suitable for applications requiring reliable non-volatile storage under demanding environmental conditions, such as automotive, industrial, and networking systems.
Pinout
Key pin functions include:
1. Power Supply Pins: VCC and VSS for power and ground.
2. Address and Data Pins: I/O[0:7] for multiplexed address and data input/output.
3. Control Pins:
- CE# (Chip Enable): Activates the chip.
- RE# (Read Enable): Controls data output.
- WE# (Write Enable): Controls data input.
- CLE (Command Latch Enable): Differentiates commands from data.
- ALE (Address Latch Enable): Differentiates addresses from data.
- WP# (Write Protect): Prevents inadvertent writes/erasures.
4. Ready/Busy Output: R/B# indicates the device status.
5. Other Pins:
- DNU (Do Not Use) and NC (No Connect): Reserved, should be left unconnected to avoid interference.
Please refer to the specific datasheet for detailed information and confirmation of pin functions as they can vary between manufacturers.
Manufacturer
Application
1. Consumer Electronics: For data storage in devices like digital cameras, smart TVs, and portable media players.
2. Industrial Systems: Used in embedded systems for data logging and firmware storage.
3. Networking Equipment: Supports boot code storage and configuration data in routers and switches.
4. Automotive Systems: Suitable for infotainment systems and navigation applications.
5. Computing Devices: Provides storage solutions in laptops, tablets, and ultrabooks.
Its high-density storage and reliability make it versatile for numerous digital storage needs.