SC16IS762IPW128

The SC16IS762IPW128 is a dual-channel I2C-bus/SPI bus UART with 64-byte FIFOs and IrDA SIR built-in support. It serves as an interface bridge for microcontrollers with I2C-bus or SPI interfaces, enabling them to connect to and manage UART ports. The device is designed to facilitate serial communication, providing efficient data handling through its 64-byte FIFO for both transmission and reception.
Key features include extended voltage range, programmable baud rate generator, and support for IrDA SIR protocol for infrared data communication. The SC16IS762IPW128 also includes GPIOs, which can be configured individually and used for various control functionalities. It supports standard I2C-bus and SPI protocols, making it versatile for different applications where multiple serial port management is needed, such as industrial automation and embedded systems.
The device is packaged in a TSSOP, which provides a compact form factor suitable for integration into space-constrained designs. Its compatibility with modern communication protocols makes it a robust choice for enhancing the communication capabilities of microcontroller-based systems.

The SC16IS762IPW128 is a dual-channel I²C/SPI-to-UART bridge. Equivalent products include the NXP SC16IS752, Maxim Integrated MAX3107, and Exar XR21V1410. These components offer similar I²C/SPI to UART bridge functionalities, catering to different design needs. Consider specifying the exact requirements such as speed, voltage levels, or package type to ensure compatibility when selecting an equivalent.

The SC16IS762IPW128 is a dual-channel I2C-bus/SPI-bus to UART bridge. It facilitates serial communication between a host device and multiple UART interfaces. Key features include:
1. Dual UART Channels: Supports two independent UART channels with 8-byte FIFOs for both transmit and receive.
2. I2C/SPI Interface: Operates with either an I2C-bus or SPI-bus interface, providing flexibility in communication protocols.
3. I2C Speed: Supports I2C speeds up to 400 kbit/s.
4. SPI Speed: Operates with SPI speeds up to 5 Mbit/s.
5. Enhanced Features: Includes features like programmable baud rate generator, fractional baud rate support, automatic hardware and software flow control.
6. GPIO: Provides up to 8 GPIO pins, which can be controlled via a register.
7. Low Power Mode: Offers low power features to conserve energy, suitable for battery-operated applications.
8. Wide Operating Range: Functions within a wide voltage range from 2.5V to 3.3V.
9. Industrial Temperature Range: Operates between -40°C to +85°C, making it suitable for industrial applications.
These features make it a versatile device for expanding serial communication capabilities in embedded systems.

The SC16IS762IPW128 is a dual-channel I2C-bus/SPI UART (Universal Asynchronous Receiver/Transmitter) with 128 bytes of transmit and receive FIFOs. It is designed to provide serial communication capabilities via I2C or SPI interface.
The SC16IS762IPW128 is available in a TSSOP (Thin Shrink Small Outline Package) with 28 pins. Here’s a concise function overview of the key pins:
1. I2C/SPI Interface:
- SDA/SI: Serial Data (I2C) / Serial Input (SPI)
- SCL/SCK: Serial Clock Line (I2C) / Serial Clock (SPI)
- A0, A1: I2C Address or Chip Select (SPI)
2. UART Channels:
- TXA, RXA: Transmit and Receive for Channel A
- TXB, RXB: Transmit and Receive for Channel B
3. Control Pins:
- RESET: Reset input
- RTS/CTS: Ready to Send/Clear to Send (for hardware flow control)
4. Power and Ground:
- VCC: Power supply
- GND: Ground
5. Miscellaneous:
- XTAL1, XTAL2: Crystal oscillator pins
- IRQ: Interrupt output
These pins support various functionalities like full-duplex communication, hardware flow control, and programmable baud rates through I2C/SPI.

The SC16IS762IPW128 is manufactured by NXP Semiconductors. NXP is a global semiconductor company headquartered in Eindhoven, Netherlands. It specializes in producing a wide range of semiconductor solutions, including microcontrollers, communication interfaces, and security solutions, among others. The company serves various industries, such as automotive, industrial, mobile, and communication infrastructure, focusing on innovation and technology that enhance connectivity, security, and efficiency.

The SC16IS762IPW128 is a dual-channel I2C-bus/SPI-bus to UART bridge designed to facilitate communication between a microcontroller and serial devices. Its application areas include:
1. Embedded Systems: Enhancing serial communication capabilities in microcontroller-based systems.
2. Industrial Automation: Enabling communication between sensors, actuators, and control systems.
3. IoT Devices: Facilitating connectivity in Internet of Things applications where multiple UART interfaces are needed.
4. Networking Equipment: Supporting serial to Ethernet or serial to Wi-Fi bridges.
5. Consumer Electronics: Integrating into devices that require serial communication with peripherals such as modems or GPS modules.
These applications leverage the device's ability to convert data between different communication protocols efficiently.

The SC16IS762IPW128 is an I²C/SPI-to-UART bridging device manufactured by NXP Semiconductors. It comes in a TSSOP-28 package, which is a thin shrink small-outline package with 28 pins. This type of package is suitable for surface-mount technology, providing a compact footprint for electronic circuit designs.