SST39VF1601-70-4I-EKE

Abbildungen dienen nur als Referenz

SST39VF1601-70-4I-EKE

+Stückliste

IC FLASH 16MBIT PARALLEL 48TSOP

365 Tage Qualitätsgarantie

7*24 Stunden-Servicegarantie

90-Tage Kundendienstgarantie

Originalproduktgarantie

Spezifikationen

Attribut Wert
Package / Case Tray
Series SST39 MPF™
Part Status Active
Memory Type Non-Volatile
Memory Format FLASH
Technology FLASH
Memory Size 16Mb (1M x 16)
Memory Interface Parallel
Write Cycle Time - Word Page 10µs
Access Time 70 ns
Voltage - Supply 2.7V ~ 3.6V
Operating Temperature -40°C ~ 85°C (TA)
Mounting Type Surface Mount

Übersicht

Description

The SST39VF1601-70-4I-EKE is a 16 Mbit (2 M x 8) CMOS Multi-Purpose Flash (MPF) memory designed and manufactured by Silicon Storage Technology, Inc. It belongs to the 39 Series of flash memory products, recognized for their high performance and reliability. This particular model operates with a 70 ns access time, making it suitable for applications requiring fast data retrieval.
Key features include a low power consumption design, with a typical active read current of 9 mA and standby current of 5 µA. The device supports sector erase capability, allowing for individual sectors to be erased without affecting other parts of the memory. Its endurance is rated for 100,000 write/erase cycles, ensuring longevity in various applications.
The SST39VF1601 is ideal for embedded systems, offering In-System Programming (ISP) and simple interface requirements. It operates over an industrial temperature range (-40°C to +85°C), making it suitable for rugged environmental conditions. The package type, EKE, refers to its specific form factor and pin configuration, optimizing it for space-constrained applications.

Equivalent

The SST39VF1601-70-4I-EKE is a 16 Mbit flash memory chip produced by Microchip Technology. Equivalent products would typically be other 16 Mbit parallel NOR flash memories with similar voltage, speed, and temperature specifications. Potential equivalents could include the AT49BV1604 from Atmel or the AM29LV160 from AMD/Spansion. However, direct equivalents might vary based on specific requirements like package type and pin configuration. Always confirm compatibility with datasheets and supplier guidance.

Features

The SST39VF1601-70-4I-EKE is a 16 Mbit Multi-Purpose Flash memory device. Key features include:
1. Density: 16 Mbit (2 M x 8).
2. Speed: 70 ns access time for read operations.
3. Interface: Parallel interface for data input/output.
4. Power Supply: Operates with a single 2.7-3.6V power supply.
5. Low Power Consumption: Features low-power operation with standby and read currents.
6. Endurance: Offers high endurance with up to 100,000 program/erase cycles.
7. Data Retention: Ensures data retention for over 100 years.
8. Sector Architecture: Divided into uniform 2 KWord sectors and 32 KWord blocks for flexible erase capabilities.
9. Package: Available in a 48-pin TSOP package.
10. Temperature Range: Designed for industrial temperature range (-40°C to +85°C).
These features make it suitable for a variety of applications requiring reliable and durable non-volatile memory.

Pinout

The SST39VF1601-70-4I-EKE is a 16 Mbit, 1M x 16 CMOS flash memory chip. It is housed in a 48-pin TSOP (Thin Small Outline Package). The primary functions of the pins are as follows:
- Address Pins (A0–A19): These pins are used to address the memory locations.
- Data Pins (DQ0–DQ15): These are bidirectional pins used to read from or write data to the memory.
- Chip Enable (CE#): This pin activates the chip's read or write operations when it is low.
- Output Enable (OE#): This pin enables the data output buffers when it is low, allowing data to be read from the chip.
- Write Enable (WE#): This pin allows data to be written to the memory when it is low.
- Reset (RST#): This pin resets the device when it is low.
- Power Supply (VDD) and Ground (VSS) Pins: These pins provide the necessary power to the chip.
These functions enable the device to perform efficient data storage and retrieval, essential for various applications in electronic systems.

Manufacturer

The SST39VF1601-70-4I-EKE is a product manufactured by Microchip Technology Inc. Microchip Technology is an American company that specializes in the production of microcontrollers, memory, and analog semiconductors. Founded in 1987, Microchip provides a wide range of products that serve various applications in industries such as automotive, aerospace, consumer electronics, and industrial automation. The company is known for its emphasis on providing comprehensive solutions that integrate its hardware, software, and system capabilities.

Application

The SST39VF1601-70-4I-EKE is a 16 Mbit multi-purpose Flash memory chip. It's commonly used in applications requiring reliable non-volatile storage. Key application areas include:
1. Embedded Systems: Used for firmware storage in microcontroller-based systems.
2. Consumer Electronics: Provides storage for device firmware and user data.
3. Networking Equipment: Stores configuration data and firmware for routers and switches.
4. Industrial Automation: Used in systems requiring durable and reliable memory for data logging and control algorithms.
5. Automotive Electronics: Stores essential software for infotainment and control systems.
These applications benefit from its high-speed access, low power consumption, and endurance for read/write cycles.

Package

The SST39VF1601-70-4I-EKE is a 16 Mbit Multi-Purpose Flash Plus memory device from Microchip Technology, and its package type is a 48-pin TSOP (Thin Small Outline Package).

Produkte, die mit SST39VF1601-70-4I-EKE zusammenhängen