TL7660CDR

The TL7660CDR is a switched-capacitor voltage converter IC manufactured by Texas Instruments. It is designed to invert input voltages, effectively converting a positive voltage to a negative one of nearly equal magnitude. This makes it useful in applications where a negative supply voltage is needed but only a positive supply is available. The TL7660CDR operates with an input voltage range of 1.5V to 10V. It features a low quiescent current, typically around 120 µA, making it suitable for battery-powered applications.
Key features include a simple implementation that requires only two external capacitors, a wide operating temperature range, and the ability to achieve high efficiency due to its low power consumption. Additionally, the device typically supports a current output of up to 20 mA. The TL7660CDR is commonly used in applications such as operational amplifier voltage supplies, portable instruments, and any systems where minimal external components are desired for creating dual power supplies from a single supply voltage.

The TL7660CDR is a charge pump voltage converter IC. Equivalent products include the MAX1044, ICL7660, and LTC1044. These ICs perform similar functions, offering voltage conversion (e.g., positive to negative voltage), and are often pin-compatible. When selecting a replacement, ensure compatible specifications such as input voltage range, output current, and operating temperature. Always refer to the datasheets for confirmation on compatibility and performance.

The TL7660CDR is a charge-pump voltage converter integrated circuit designed for voltage inversion, doubling, or splitting. Key features include:
1. Voltage Conversion: It can invert input voltages of 1.5V to 10V to produce a negative output voltage, effectively doubling or splitting voltages.
2. Low Supply Current: The device has low power consumption, with a typical supply current of 170 µA.
3. Efficient Design: It boasts a high-efficiency charge pump architecture, reducing the need for external components.
4. Oscillator Frequency: The internal oscillator runs at a frequency of approximately 10 kHz.
5. Compact Package: Available in a small, surface-mount SOIC-8 package, making it suitable for space-constrained applications.
6. Wide Temperature Range: It operates effectively over a temperature range of -40°C to 85°C.
7. Easy Implementation: Requires few external components, simplifying design and reducing system cost.
8. High Output Current: Capable of sourcing up to 20 mA output current.
These features make the TL7660CDR suitable for battery-powered and portable applications that require efficient voltage inversion or multiplication.

The TL7660CDR is an integrated circuit designed for voltage conversion and is commonly used to invert input voltages. It has an 8-pin configuration with the following pin functions:
1. Pin 1 (V+): Positive supply voltage input.
2. Pin 2 (CAP+): Positive terminal for the charge pump capacitor.
3. Pin 3 (GND): Ground.
4. Pin 4 (CAP-): Negative terminal for the charge pump capacitor.
5. Pin 5 (LV): Low-voltage operation pin; connect to ground for low-voltage operation.
6. Pin 6 (OSC): Oscillator control; can be used to adjust the oscillator frequency.
7. Pin 7 (VOUT): Inverted output voltage.
8. Pin 8 (V-): Negative supply voltage output.
The TL7660CDR is commonly used in applications requiring a negative voltage from a positive supply and is capable of efficient performance with minimal external components.

The TL7660CDR is manufactured by Texas Instruments (TI). Texas Instruments is a global semiconductor company that designs and manufactures a wide range of electronic components. These components are used in various applications, including industrial, automotive, personal electronics, and communications equipment. TI is particularly known for its analog and embedded processing products, which play critical roles in the functionality of modern electronic devices. The company is headquartered in Dallas, Texas, and has a long history in the semiconductor industry, being one of the largest and most established companies in the field.

The TL7660CDR is a charge pump voltage converter IC commonly used in applications requiring voltage inversion. It is ideal for generating a negative voltage from a positive supply, making it suitable for battery-powered devices, operational amplifier biasing, and sensor interface circuits. Additionally, it is used in RS-232 communication systems for level shifting, LCD biasing, and powering small analog circuits. Its compact size and low power consumption make it effective in portable electronics and embedded systems where minimal board space and efficiency are crucial.

The TL7660CDR is a switched-capacitor voltage converter IC, typically available in an 8-pin SOIC (Small Outline Integrated Circuit) package type.