Abbildungen dienen nur als Referenz
TLC555QDR
+StücklisteIC OSC SGL TIMER 2.1MHZ 8-SOIC
-
HerstellerTexas Instruments
-
Herstellerteil #TLC555QDR
-
Paket SOIC-8
-
Auf Lager1405
365 Tage Qualitätsgarantie
7*24 Stunden-Servicegarantie
90-Tage Kundendienstgarantie
Originalproduktgarantie
Spezifikationen
| Attribut | Wert |
| Package / Case | Tape & Reel (TR),Cut Tape (CT),Bulk |
| Series | LinCMOS™ |
| Part Status | Active |
| Type | 555 Type, Timer/Oscillator (Single) |
| Frequency | 2.1MHz |
| Voltage - Supply | 5V ~ 15V |
| Supply Current | 360 µA |
| Operating Temperature | -40°C ~ 125°C |
| Supplier Device Package | 8-SOIC |
Übersicht
Description
- Low power consumption (significantly lower than the NE555).
- High output drive capability (up to 100mA).
- Improved timing accuracy with reduced supply current spikes.
- Wide operating temperature range (–40°C to 125°C).
Available in an SOIC-8 (QDR) package, it’s ideal for precision timing, pulse generation, and oscillator circuits. Common applications include LED flashers, delay circuits, and PWM control.
Compared to the bipolar 555, the TLC555 offers better noise immunity and lower power draw, making it a preferred choice for modern electronics.
Equivalent
- NE555 (standard bipolar version, higher power)
- LMC555 (CMOS, similar low-power performance)
- TS555 (CMOS, low-voltage operation)
- ICM7555 (CMOS, low-power alternative)
For direct replacements, check TLC555IDR (same specs, different package) or TLC555CP (DIP package). Verify datasheets for exact compatibility.
Pinout
Pin Functions:
1. GND – Ground
2. TRIG – Trigger input (starts timing when < 1/3 VCC)
3. OUT – Timer output
4. RESET – Active-low reset (halts timing when low)
5. CTRL – Control voltage (modulates threshold)
6. THRES – Threshold input (ends timing when > 2/3 VCC)
7. DISCH – Open-drain discharge (discharges timing capacitor)
8. VCC – Supply voltage (2V–15V)
It operates similarly to the standard 555 but with lower power consumption and improved performance. Common applications include timers, oscillators, and pulse generation.
Manufacturer
Application
- Timing circuits: Precision delays, pulse generation.
- Oscillators: Square/triangle wave generation.
- PWM control: Motor speed, LED dimming.
- Sensor interfaces: Triggering, debouncing.
- Power management: Voltage monitoring, power-on reset.
- Consumer electronics: Toys, alarms, timers.
Its low power consumption, wide voltage range (2V–15V), and small footprint make it ideal for portable and battery-operated devices.