Abbildungen dienen nur als Referenz
TLV7256IDDUR
+StücklisteIC COMPARATOR DUAL 8-VSSOP
-
HerstellerTexas Instruments
-
Herstellerteil #TLV7256IDDUR
-
Paket VFSOP-8
-
Auf Lager4840
365 Tage Qualitätsgarantie
7*24 Stunden-Servicegarantie
90-Tage Kundendienstgarantie
Originalproduktgarantie
Spezifikationen
| Attribut | Wert |
| Package / Case | Tape & Reel (TR),Cut Tape (CT) |
| Part Status | Active |
| Type | General Purpose |
| Number of Elements | 2 |
| Output Type | CMOS, Push-Pull, TTL |
| Voltage - Supply, Single/Dual (±) | 1.8V ~ 5V |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias(Max) | 4pA @ 5V |
| Current - Output (Typ) | 35mA @ 5V |
| Current - Quiescent (Max) | 70µA |
| CMRRPSRR(Typ) | 65dB CMRR |
| Propagation Delay(Max) | 680ns |
| Operating Temperature | -40°C ~ 85°C |
| Mounting Type | Surface Mount |
Übersicht
Description
The TLV7256IDDUR is a precision operational amplifier (op-amp) developed by Texas Instruments. Designed for low-voltage and low-power applications, this dual op-amp integrates advanced features suitable for a variety of applications, including portable devices, sensor interfaces, and general-purpose analog amplification.
Key specifications of the TLV7256IDDUR include its low power consumption and wide supply voltage range, typically operating from 1.8V to 5.5V. The op-amp offers a rail-to-rail input and output, maximizing dynamic range in single or split supply configurations. Its low input offset voltage and low bias current contribute to higher precision and signal integrity.
The device is housed in a compact and thermally efficient package, promoting ease of integration into space-constrained designs. It also includes features such as short-circuit protection and temperature stability, enhancing reliability across various environments.
Overall, the TLV7256IDDUR is ideal for engineers seeking high-performance op-amps that deliver precision and efficiency in compact form factors, suited for modern electronic applications.
Key specifications of the TLV7256IDDUR include its low power consumption and wide supply voltage range, typically operating from 1.8V to 5.5V. The op-amp offers a rail-to-rail input and output, maximizing dynamic range in single or split supply configurations. Its low input offset voltage and low bias current contribute to higher precision and signal integrity.
The device is housed in a compact and thermally efficient package, promoting ease of integration into space-constrained designs. It also includes features such as short-circuit protection and temperature stability, enhancing reliability across various environments.
Overall, the TLV7256IDDUR is ideal for engineers seeking high-performance op-amps that deliver precision and efficiency in compact form factors, suited for modern electronic applications.
Equivalent
The TLV7256IDDUR is a dual, low-voltage, rail-to-rail output operational amplifier from Texas Instruments. Equivalent products include the LMV358 from Texas Instruments, the MCP6022 from Microchip Technology, and the AD8606 from Analog Devices. Each of these alternatives offers similar low-voltage operation and rail-to-rail output features, though specifications should be reviewed to ensure compatibility with your specific application requirements.
Features
The TLV7256IDDUR is a dual-channel, general-purpose operational amplifier from Texas Instruments. It features rail-to-rail input and output capability, which allows it to operate effectively across a wide range of input voltages. This op-amp operates on low supply current, making it energy-efficient for battery-powered applications. It has a wide supply voltage range from 2.5V to 5.5V, making it versatile for various applications.
The TLV7256IDDUR is designed to offer a good balance of speed and power, with a typical gain bandwidth product of 1 MHz. It exhibits low offset voltage and low input bias current, ensuring precision in signal processing applications. Additionally, the device includes internal ESD protection for improved reliability and robustness.
Packaged in the compact SOIC-8 (Small Outline Integrated Circuit) form, this op-amp is suitable for space-constrained designs. The TLV7256IDDUR is ideal for use in audio amplification, sensor interfacing, and other precision analog applications. It is designed to operate over the extended industrial temperature range, providing reliability in various environmental conditions.
The TLV7256IDDUR is designed to offer a good balance of speed and power, with a typical gain bandwidth product of 1 MHz. It exhibits low offset voltage and low input bias current, ensuring precision in signal processing applications. Additionally, the device includes internal ESD protection for improved reliability and robustness.
Packaged in the compact SOIC-8 (Small Outline Integrated Circuit) form, this op-amp is suitable for space-constrained designs. The TLV7256IDDUR is ideal for use in audio amplification, sensor interfacing, and other precision analog applications. It is designed to operate over the extended industrial temperature range, providing reliability in various environmental conditions.
Pinout
The TLV7256IDDUR is a dual-channel operational amplifier from Texas Instruments. It comes in an 8-pin package. The primary function of this device is to serve as a general-purpose operational amplifier, typically used in applications requiring low-power consumption and a wide supply voltage range. The specific package for the TLV7256IDDUR is the "DDU" package, which refers to the 8-pin WSON (Wettable Flank Small Outline No-lead) package.
Each pin of the TLV7256IDDUR serves a specific function as follows:
1. OUT A: Output of channel A.
2. -IN A: Inverting input of channel A.
3. +IN A: Non-inverting input of channel A.
4. V-: Negative power supply (ground for a single supply setup).
5. +IN B: Non-inverting input of channel B.
6. -IN B: Inverting input of channel B.
7. OUT B: Output of channel B.
8. V+: Positive power supply.
This configuration enables the TLV7256IDDUR to perform amplification tasks in dual-channel configurations, where each channel can be used independently or together for differential amplification tasks.
Each pin of the TLV7256IDDUR serves a specific function as follows:
1. OUT A: Output of channel A.
2. -IN A: Inverting input of channel A.
3. +IN A: Non-inverting input of channel A.
4. V-: Negative power supply (ground for a single supply setup).
5. +IN B: Non-inverting input of channel B.
6. -IN B: Inverting input of channel B.
7. OUT B: Output of channel B.
8. V+: Positive power supply.
This configuration enables the TLV7256IDDUR to perform amplification tasks in dual-channel configurations, where each channel can be used independently or together for differential amplification tasks.
Manufacturer
The TLV7256IDDUR is manufactured by Texas Instruments (TI). Texas Instruments is a global semiconductor company that designs and manufactures a range of analog and embedded processing chips. It serves various industries, including automotive, industrial, personal electronics, and communications equipment. TI is known for its innovation in designing and producing integrated circuits and other semiconductor devices, playing a significant role in the electronics industry worldwide.
Application
The TLV7256IDDUR is a dual-channel, low-voltage comparator commonly used in various applications. Key areas include:
1. Battery-Powered Devices: It is suitable for portable electronics due to its low power consumption.
2. Level Shifting: Used in interfacing different voltage levels in mixed-signal circuits.
3. Oscillator Circuits: Helps generate clock signals by acting as a waveform converter.
4. Threshold Detectors: Used in overcurrent, overvoltage, and window detector circuits.
5. Zero-Crossing Detectors: Facilitates signal processing in audio and communication circuits.
These applications benefit from the device's low-voltage capability, fast response time, and small footprint.
1. Battery-Powered Devices: It is suitable for portable electronics due to its low power consumption.
2. Level Shifting: Used in interfacing different voltage levels in mixed-signal circuits.
3. Oscillator Circuits: Helps generate clock signals by acting as a waveform converter.
4. Threshold Detectors: Used in overcurrent, overvoltage, and window detector circuits.
5. Zero-Crossing Detectors: Facilitates signal processing in audio and communication circuits.
These applications benefit from the device's low-voltage capability, fast response time, and small footprint.
Package
The TLV7256IDDUR is packaged in a "SOIC" (Small Outline Integrated Circuit) form, specifically an 8-pin SOIC package, commonly referred to by its code "D" for the SOIC standard. It is designed for surface mounting on printed circuit boards and is typically used in applications requiring a small footprint and reliable performance.
