Abbildungen dienen nur als Referenz
TLV76701DRVR
+StücklisteIC REG LINEAR POS ADJ 1A 6WSON
-
HerstellerTexas Instruments
-
Herstellerteil #TLV76701DRVR
-
Paket WSON8
-
Auf Lager7600
365 Tage Qualitätsgarantie
7*24 Stunden-Servicegarantie
90-Tage Kundendienstgarantie
Originalproduktgarantie
Spezifikationen
| Attribut | Wert |
| Package | Tape & Reel (TR),Cut Tape (CT) |
| ProductStatus | Active |
| OutputConfiguration | Positive |
| OutputType | Adjustable |
| NumberofRegulators | 1 |
| Voltage-Input(Max) | 16V |
| Voltage-Output(Min/Fixed) | 0.8V |
| Voltage-Output(Max) | 13.6V |
| VoltageDropout(Max) | 1.4V @ 1A |
| Current-Output | 1A |
| Current-Quiescent(Iq) | 80 µA |
| Current-Supply(Max) | 1.5 mA |
| PSRR | 70dB (120Hz) |
| ControlFeatures | Enable |
| ProtectionFeatures | Over Current, Over Temperature, Under Voltage Lockout (UVLO) |
| OperatingTemperature | -40°C ~ 125°C (TJ) |
| MountingType | Surface Mount |
| Package/Case | 6-WDFN Exposed Pad |
Übersicht
Description
One of the key features of the TLV76701DRVR is its low dropout voltage, which ensures efficient performance even when the input voltage is relatively close to the output voltage. It also has a low quiescent current, enhancing energy efficiency, especially in battery-powered devices.
The regulator includes several protection features such as thermal shutdown and current limiting, which safeguard against over-temperature and over-current conditions. Its small package size makes it ideal for space-constrained applications, including industrial equipment, consumer electronics, and communication devices. The TLV76701DRVR is known for its ease of use, reliability, and robust performance across different environments and applications.
Equivalent
1. MIC5205 from Microchip Technology: Offers similar low-dropout performance.
2. LT1117 from Analog Devices: Widely used LDO with comparable voltage regulation.
3. NCP1117 from ON Semiconductor: Another LDO with similar specifications.
4. AP7333 from Diodes Incorporated: A low-dropout regulator with similar application use.
Always check the specific requirements and datasheets as characteristics can vary.
Features
1. Output Voltage: It supports an adjustable output voltage range from 1.0 V to 6.0 V, providing flexibility for various applications.
2. Input Voltage: The device operates with an input voltage range of 2.5 V to 16 V, suitable for diverse power supply sources.
3. Current Capability: It can deliver up to 1 A of output current, making it suitable for powering moderate load applications.
4. Low Dropout Voltage: The regulator features a low dropout voltage, which enhances efficiency and performance in low voltage situations.
5. Low Quiescent Current: It offers low quiescent current, ideal for battery-powered applications, helping to extend battery life.
6. Thermal Protection: The built-in thermal shutdown feature protects the device from overheating.
7. Short-Circuit Protection: It includes short-circuit protection to prevent damage in fault conditions.
8. Package: The TLV76701DRVR is available in a small, thermally efficient 6-pin SOT-23 (DRV) package, suitable for space-constrained applications.
These features make the TLV76701DRVR a versatile and reliable choice for a variety of electronic devices.
Pinout
1. IN: Input voltage. Connect this pin to the supply voltage.
2. GND: Ground. This is the common ground for both the input and output voltage.
3. EN: Enable. This pin is used to enable or disable the LDO. Driving this pin high enables the device, while driving it low puts it in a shutdown mode.
4. OUT: Regulated output voltage. Connect this pin to your load.
5. FB: Feedback. This pin is used to set the output voltage, typically via a resistive divider.
6. NR/SS: Noise reduction/soft start. This pin can be used to reduce output noise or to control the start-up time of the regulator.
For precise pin configurations and connections, always refer to the datasheet provided by the manufacturer.
Manufacturer
Application
1. Consumer Electronics: Used in devices like smartphones, tablets, and wearables for power management.
2. Industrial Equipment: Supports applications requiring stable voltage regulation under varying conditions.
3. Automotive Systems: Suitable for infotainment and dashboard electronics, complying with automotive standards.
4. Communication Devices: Ensures stable operation in routers, modems, and other networking equipment.
5. Medical Devices: Provides reliable power management solutions for portable and diagnostic equipment.
6. IoT Devices: Powers sensors and connected devices with minimal energy consumption.
Its features, such as low dropout voltage, high accuracy, and small package size, make it versatile for these applications.