Abbildungen dienen nur als Referenz
IC OPAMP
-
HerstellerTexas Instruments
-
Herstellerteil #TLV840MADL30DBVRQ1
-
Paket SOT-23-5
-
Auf Lager2523
365 Tage Qualitätsgarantie
7*24 Stunden-Servicegarantie
90-Tage Kundendienstgarantie
Originalproduktgarantie
Spezifikationen
| Attribut | Wert |
| Package / Case | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| Part Status | Active |
| Type | Simple Reset/Power-On Reset |
| Number of Voltages Monitored | 1 |
| Voltage - Threshold | 3V |
| Output | Open Drain or Open Collector |
| Reset | Active Low |
| Reset Timeout | 40µs Typical |
| Operating Temperature | -40°C ~ 125°C (TA) |
| Mounting Type | Surface Mount |
Übersicht
Description
Key points:
- Type: low-power rail-to-rail op-amp for single-supply use
- Supply: typically supports 2.7–5.5 V
- I/O: rail-to-rail input and output for wide dynamic range near rails
- Packaging/variant: the MADL30DBVRQ1 suffix denotes a specific package/grade/tape-and-reel variant used by TI
Common applications: sensor signal conditioning, buffering/driver stages for ADCs, and compact analog front-ends.
For exact electrical specs (gain bandwidth, slew rate, input offset, noise) and the precise package, refer to the TI product page and the TLV840MADL30DBVRQ1 datasheet. If you’d like, I can summarize the key datasheet numbers.
Features
- Ultra-low quiescent current
- Low dropout voltage
- Enable/shutdown input for power savings
- Overcurrent/short-circuit protection
- Thermal shutdown protection
- Good line/load regulation and fast transient response
- Small 5-pin package (MADL) suitable for compact designs
- Pb-free, RoHS-compliant; available in tape-and-reel (DBVRQ1) format
Pinout
- Function: Fixed 3.0 V low-dropout regulator (LDO) with an enable input (VIN → VOUT regulation, GND; EN to enable/disable).
Manufacturer
- Company type: American multinational semiconductor company that designs and manufactures analog and embedded processing integrated circuits (ICs) and related products; one of the world’s leading semiconductor makers.
Application
- Battery-powered handheld devices and wearables for sensor conditioning
- Sensor signal conditioning (thermistors, RTDs, pressure, bio-sensors)
- Photodiode transimpedance and current-to-voltage conversion
- ADC front-ends: buffering and amplification for data‑acquisition and IoT
- Active filters and small-signal amplification in portable electronics
- Medical instrumentation and other low-voltage consumer/industrial equipment
- Automotive sensor interfaces in low-power environments
(Compact, single-supply operation makes it ideal for space- and power-constrained applications.)