TPS23880RTQR

TPS23880RTQR is a Texas Instruments device in the TPS23880 family. It is a dual high‑side protection switch designed for hot‑swap/surge protection of power loads. Key ideas:
- Dual channel: provides two protected power paths with current‑limiting and fault protection.
- Built‑in protection: overcurrent/short‑circuit protection, thermal shutdown, and fault/status reporting.
- Auto‑retry: faults automatically clear and the device attempts to restart.
- Applications: use in power‑supply front ends, telecom/industrial equipment, and other systems that require safe plug‑in and surge protection for loads.
- Packaging: RTQR indicates Tape & Reel packaging (and RoHS/compliant variant).
In short, TPS23880RTQR is a dual surge‑stopper/line protection device that helps protect loads and manage faults during power connection events. If you need exact electrical specs (voltage/current limits, timing, and pinout), consult the TI datasheet for the TPS23880 series.

TPS23880RTQR is TI’s PoE PD interface/controller with surge protection. For exact cross-reference equivalents from other vendors, please specify target vendors (e.g., Analog Devices, ON Semiconductor, Infineon, Microchip) and key specs (IEEE 802.3af/at, integrated FET, current rating, package). I can then provide precise cross-reference part numbers.

TPS23880RTQR Features (concise)
- 1-channel hot-swap controller with an integrated N-channel MOSFET for board protection.
- Wide input voltage range suitable for telecom/industrial applications; surge tolerance.
- Adjustable current limit via external resistor; programmable inrush/soft-start.
- Overcurrent/short-circuit protection with fault signaling (latch or hiccup behavior, depending on mode).
- Overvoltage and undervoltage (UVLO) protection for load safety.
- Thermal shutdown protection to prevent device/property damage.
- Remote enable/disable control with status/fault reporting.
- Fault/status outputs (open-drain) for microcontroller monitoring.
- Low quiescent current when not actively switching; configurable timing for protection responses.
- Package: compact 8-pin RTQ (Tape & Reel), RoHS-compliant.
Note: For exact electrical specs (voltage ranges, current limit values, mode options), please consult the TPS23880RTQR datasheet.

- Pin count: 8 pins (VSSOP/MSOP-style package, RTQR tape-and-reel variant)
- Function: High-side hot-swap power switch with integrated current limit and protection (fault reporting). It provides inrush control and overcurrent/undervoltage protection for a supply (commonly used in PoE PD or similar hot-swap applications).

- Manufacturer: Texas Instruments (TI)
- Company type: A global American multinational semiconductor company that designs and manufactures analog and embedded processing integrated circuits.

TPS23880RTQR is a high‑side switch with current limit and thermal protection for hot‑swap and protection on HV inputs. Typical applications:
- Hot‑swap protection and inrush current limiting for AC mains and high‑voltage DC rails in power supplies
- Input protection for telecom, networking, servers, and industrial equipment
- Surge/short‑circuit protection in battery chargers and HV LED driver modules
- High‑side protection for embedded power modules and consumer electronics with HV inputs

TPS23880RTQR comes in an 8-pin VSON package (VSON-8, about 2.9 × 2.9 mm).