Abbildungen dienen nur als Referenz
W25Q256FVFIQ
+StücklisteIC FLASH 256MBIT SPI/QUAD 16SOIC
-
HerstellerWinbond Electronics
-
Herstellerteil #W25Q256FVFIQ
-
Datenblatt W25Q256FVFIQ DataSheet
-
Auf Lager6795
365 Tage Qualitätsgarantie
7*24 Stunden-Servicegarantie
90-Tage Kundendienstgarantie
Originalproduktgarantie
Spezifikationen
| Attribut | Wert |
| Series | SpiFlash® |
| Part Status | Discontinued at DigiKey |
| Base Product Number | W25Q256 |
| DigiKey Programmable | Not Verified |
| Memory Type | Non-Volatile |
| Memory Format | FLASH |
| Technology | FLASH - NOR |
| Memory Size | 256Mbit |
| Memory Organization | 32M x 8 |
| Memory Interface | SPI - Quad I/O, QPI |
| Clock Frequency | 104 MHz |
| Write Cycle Time - Word, Page | 50µs, 3ms |
| Voltage - Supply | 2.7V ~ 3.6V |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Mounting Type | Surface Mount |
| Package | 16-SOIC (0.295", 7.50mm Width) |
| Supplier Device Package | 16-SOIC |
| Packaging | Tube |
Übersicht
Description
Key points
- Capacity: 256 Mbit (32 MB)
- Interface: SPI with dual/quad I/O and QPI options
- Voltage: 3.3V (typ. 2.7–3.6V)
- Speed: up to 104 MHz read throughput (quad I/O/QPI modes available)
- Organization: 256-byte page program; 4 KB sectors; 64 KB blocks; full-chip erase
- Power: deep power-down mode; low-power operation
- Endurance/retention: typical erase/program cycles around 100k; long data retention
- Security: block protection, OTP area, hardware write protection; unique ID
- Packaging: common 8-pin packages
Typical use: firmware boot/storage in embedded systems, microcontroller projects, and data logging. For exact opcodes, timing, and electrical specs, consult the official datasheet for the FIQ variant.
Equivalent
- Micron N25Q256A (N25Q256A11G)
- Macronix MX25L25645G (MX25L25645GDI)
- Gigadevice GD25Q256C (GD25Q256C)
- ISSI IS25LP256D (IS25LP256D)
- Spansion S25FL256S (S25FL256S)
Note: cross-references vary by packaging, voltage, and timing. Verify against datasheets for exact cross-reference.
Features
- 256-Mbit (32 MBytes) serial NOR flash
- Supply voltage: 2.7–3.6 V
- SPI interface with standard, dual I/O, and quad I/O fast read modes
- Page program size: 256 bytes
- Erase operations: 4 KB sectors; 64 KB blocks; full-chip erase
- Deep power-down mode and low-power standby
- 20-year data retention; endurance ~100,000 erase/program cycles
- 8-pin package (FIQ code; variants in other packages)
- Industrial temperature range: -40°C to +85°C
- Write protection via WP# and device holds via HOLD# pins
Optional: supports fast read and high-speed data transfer through multi-I/O modes.
Pinout
- Function: 256 Mbit serial flash memory with SPI interface (non-volatile storage for code/data).
Manufacturer
- Company type: A Taiwanese semiconductor company that designs and manufactures memory products (notably NOR flash and DRAM) for embedded systems; a global memory IC supplier with in-house fabrication capabilities.
Application
- Firmware storage and boot flash for microcontrollers/SoCs in consumer electronics, networking gear, and industrial devices
- External program/data memory for embedded systems and OTA firmware updates
- Automotive ECUs and other control units for reliable non-volatile storage
- IoT devices, sensors, gateways for long-term program storage and data logging
- Development boards and evaluation kits as boot memory or expandable flash
These uses leverage its non-volatile, fast-read SPI interface and large capacity.
Package
Frequently Asked Questions
Q: What is the memory size and organization of the W25Q256FVFIQ?
A: It is a 256Mbit (32M x 8) serial NOR Flash memory, ideal for code shadowing or data storage.
Q: Does this device support Quad SPI and QPI interfaces?
A: Yes, it supports standard SPI as well as Quad I/O and QPI (Quad Peripheral Interface) for enhanced throughput.
Q: What is the maximum clock frequency for this Flash memory?
A: The maximum clock frequency is 104 MHz, enabling fast read/write operations in high-speed designs.
Q: What is the typical write cycle time for a page or word?
A: Page program time is 3ms typical, and word program time is 50μs typical, ensuring quick programming.
Q: What is the operating voltage range for this component?
A: It operates from 2.7V to 3.6V, making it compatible with standard 3.3V logic systems.
Q: What is the operating temperature range?
A: It is rated for industrial temperature range from -40°C to +85°C (TA), suitable for harsh environments.
Q: What package type is available for the W25Q256FVFIQ?
A: It comes in a surface-mount 16-SOIC package with 0.295" body width (7.50mm), ideal for compact PCB designs.
