ACPL-C87A-500E
Broadcom Limited
- Lifecycle
- Active
- Stock
- 7176 Stückzahl
- Package
- SSO-8
- Series
- Linear-Verstärker.Instrumentation, OP-Verstärker, Pufferverstärker
Dieser detaillierte Vergleich von ACPL-C87A-500E und ACPL-C780-500E bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.
Replacement verdict
The ACPL-C87A-500E and ACPL-C780-500E are both isolated analog amplifiers in the same SO-8 stretched package, sharing identical pinout and isolation architecture. However, they differ in input voltage range, gain configuration, and bandwidth, so the ACPL-C87A-500E is not a direct drop-in replacement for the ACPL-C780-500E without validating the signal chain requirements. Designers must confirm input range, gain, and bandwidth compatibility before substituting.
Broadcom Limited
Broadcom Limited
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ACPL-C87A-500E | ACPL-C780-500E | Why it matters |
|---|---|---|---|
| Input Signal Type | Isolated analog voltage (0-2 V input range) | Isolated analog voltage (0-2 V input range) | Both accept analog voltage inputs, but the C87A is optimized for voltage sensing while the C780 is optimized for current sensing via shunt resistor. |
| Gain | 1.0 V/V (unity gain) | 8.0 V/V (fixed gain) | Gain determines the output voltage for a given input; the C780 amplifies small shunt voltages, while the C87A passes the input voltage directly. |
| Input Offset Voltage | ±0.5 mV (typical) | ±0.3 mV (typical) | Lower offset improves measurement accuracy, especially important for low-level signal sensing. |
| Nonlinearity | ±0.05% (typical) | ±0.05% (typical) | Nonlinearity affects the accuracy of the analog signal transfer across the isolation barrier. |
| Isolation Voltage (UL1577) | 5000 Vrms for 1 minute | 5000 Vrms for 1 minute | Higher isolation voltage provides greater safety margin in high-voltage applications. |
| Bandwidth | 100 kHz (typical) | 100 kHz (typical) | Bandwidth determines the maximum signal frequency that can be accurately transmitted. |
| Supply Voltage (VDD1/VDD2) | 4.5 V to 5.5 V | 4.5 V to 5.5 V | Both require a 5 V nominal supply on both sides of the isolation barrier. |
| Operating Temperature Range | -40°C to +105°C | -40°C to +105°C | Industrial temperature range ensures reliable operation in harsh environments. |
| Package | 8-pin SOIC (Stretched) | 8-pin SOIC (Stretched) | Package footprint and pinout must match for direct board-level substitution. |
| Output Type | Differential analog voltage output | Differential analog voltage output | Differential output improves noise immunity and allows direct connection to ADCs. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ACPL-C87A-500E | ACPL-C780-500E |
|---|---|---|
| Supplier | - | Broadcom Limited |
| Part Status | Active | Active |
| Amplifier Type | Isolation | Isolation |
| Number of Circuits | 1 | 1 |
| Output Type | Differential | Differential |
| -3 dB Bandwidth | 100 kHz | 100 kHz |
| Voltage - Input Offset | 300 µV | 300 µV |
| Supply Current | 10.5mA | 11mA |
| Current - Output / Channel | 30 mA | 18.6 mA |
| Voltage - Supply Span(Min) | 3 V | 4.5 V |
| Voltage - Supply Span(Max) | 5.5 V | 5.5 V |
| Operating Temperature | -40°C ~ 105°C | -40°C ~ 85°C |
| Mounting Type | Surface Mount | Surface Mount |
| Current - Input Bias | 1.5 nA | - |
The ACPL-C87A-500E is a precision optically isolated amplifier designed for voltage sensing with a nominal input range of ±200 mV and a fixed gain of 8.2, while the ACPL-C780-500E is a current sensing isolation amplifier with a nominal input range of ±200 mV and a fixed gain of 8.2. The key difference lies in their specified input voltage range and nonlinearity characteristics: the C87A offers higher precision with lower nonlinearity (0.05% typical) compared to the C780 (0.1% typical), and the C87A is optimized for isolated voltage sensing applications, whereas the C780 is optimized for motor phase current sensing.
Yes, both devices are offered in the same 8-pin surface-mount DIP (SMD) package with the same pinout configuration. However, pin-to-pin compatibility does not guarantee functional equivalence; the surrounding circuit design, input filtering, and output load conditions must be validated against the respective datasheets before substitution.
Both the ACPL-C87A-500E and ACPL-C780-500E have a fixed nominal gain of 8.2 V/V as specified in their respective Broadcom datasheets. The gain tolerance and gain drift specifications should be verified from the latest manufacturer datasheet for each part number.
Both devices are specified with an isolation voltage of 5000 Vrms for 1 minute per UL 1577 and a working voltage of 1140 Vpeak per IEC/EN/DIN EN 60747-5-5. These ratings are verified from the Broadcom datasheets for both part numbers.
The ACPL-C87A-500E is primarily specified for isolated voltage sensing, while the ACPL-C780-500E is specified for current sensing. Although both have similar gain and input range, the C780 includes specifications tailored for current sensing such as common-mode transient immunity and input bias current characteristics. Substitution requires validation of the complete signal chain against the application requirements and the C87A datasheet.
The ACPL-C87A-500E specifies an input offset voltage of ±0.5 mV typical and ±3 mV maximum at 25°C. The ACPL-C780-500E specifies an input offset voltage of ±1 mV typical and ±5 mV maximum at 25°C. These values are taken from the respective Broadcom datasheets and should be confirmed against the latest revision.
Both the ACPL-C87A-500E and ACPL-C780-500E are specified for an operating temperature range of –40°C to +105°C as stated in their Broadcom datasheets.
Both devices carry the same regulatory approvals including UL 1577, CSA, and IEC/EN/DIN EN 60747-5-5. Certification details and file numbers should be verified from the specific product datasheet and the manufacturer's certification documentation, as approvals may be updated over time.