AD8544ARZ
Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 4354 Stückzahl
- Package
- SOIC-14
- Series
- Linear-Verstärker.Instrumentation, OP-Verstärker, Pufferverstärker
Dieser detaillierte Vergleich von AD8544ARZ und AD8542AR-REEL7 bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.
Replacement verdict
The AD8544ARZ and AD8542AR-REEL7 are both single-supply CMOS operational amplifiers from the same AD854x family, sharing identical per-channel AC and DC performance characteristics. The primary distinction is channel count: the AD8544ARZ integrates four amplifiers in a 14-lead SOIC package, while the AD8542AR-REEL7 provides two amplifiers in an 8-lead SOIC package. For designs requiring fewer channels or a smaller footprint, the AD8542AR-REEL7 is a viable functional substitute, provided the board layout is revised to accommodate the different package and pinout. Designers should confirm channel count requirements and verify PCB footprint compatibility before substitution.
Analog Devices Inc.
Analog Devices Inc.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD8544ARZ | AD8542AR-REEL7 | Why it matters |
|---|---|---|---|
| Number of Amplifiers | 4 (Quad) | 2 (Dual) | Determines how many independent op-amp channels are available in a single package; a quad cannot directly replace a dual in a board layout expecting two channels. |
| Supply Voltage Range | 2.7 V to 5.5 V | 2.7 V to 5.5 V | Both parts operate over the same single-supply range, so power rail compatibility is preserved when substituting. |
| Gain Bandwidth Product | 1 MHz | 1 MHz | Matching bandwidth ensures similar AC signal handling and closed-loop response in the target circuit. |
| Input Offset Voltage (Max) | 6 mV | 6 mV | Identical offset spec means DC accuracy and error budget remain consistent between the two parts. |
| Input Bias Current | 1 pA (typ) | 1 pA (typ) | Very low CMOS input bias current suits high-impedance sensor interfaces; matching values preserve input loading behavior. |
| Supply Current per Amplifier | 45 µA (typ) | 45 µA (typ) | Low quiescent current is critical for battery-powered designs; equal per-amplifier draw keeps power budgets comparable. |
| Slew Rate | 0.92 V/µs | 0.92 V/µs | Identical slew rate ensures similar large-signal transient response and stability margins. |
| Package / Pin Count | 14-lead SOIC | 8-lead SOIC | Different package footprints and pin counts mean the parts are not drop-in replacements; PCB layout must accommodate the respective package. |
| Operating Temperature Range | -40 °C to +125 °C | -40 °C to +125 °C | Both cover the industrial/extended range, so environmental compatibility is equivalent for substitution purposes. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD8544ARZ | AD8542AR-REEL7 |
|---|---|---|
| Supplier | - | Analog Devices Inc.,Rochester Electronics, LLC |
| Part Status | Active | Obsolete |
| Amplifier Type | General Purpose | General Purpose |
| Number of Circuits | 4 | 2 |
| Output Type | Rail-to-Rail | Rail-to-Rail |
| Slew Rate | 0.92V/µs | 0.92V/µs |
| Gain Bandwidth Product | 1 MHz | 1 MHz |
| Current - Input Bias | 4 pA | 4 pA |
| Voltage - Input Offset | 1 mV | 1 mV |
| Supply Current | 45µA (x4 Channels) | 45µA (x2 Channels) |
| Current - Output / Channel | 30 mA | 30 mA |
| Voltage - Supply Span(Min) | 2.7 V | 2.7 V |
| Voltage - Supply Span(Max) | 5.5 V | 5.5 V |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 125°C |
| Mounting Type | Surface Mount | Surface Mount |
The AD8544ARZ is a quad (four-channel) rail-to-rail CMOS operational amplifier in a 14-lead SOIC package, while the AD8542AR-REEL7 is a dual (two-channel) rail-to-rail CMOS op amp in an 8-lead SOIC package supplied on a 7-inch reel. Both share the same 2.7 V to 5.5 V supply range, 1 MHz gain bandwidth product, and rail-to-rail input/output architecture, but differ in channel count, package pin count, and packaging format.
Yes. Both devices are members of the AD8541/AD8542/AD8544 family and share the same per-channel specifications, including a 1 MHz gain bandwidth product, 0.92 V/µs slew rate, and rail-to-rail input and output swing. The primary differences are the number of integrated channels and the package/packaging format.
No, they are not pin-compatible drop-in replacements. The AD8544ARZ is a 14-lead SOIC quad device, while the AD8542AR-REEL7 is an 8-lead SOIC dual device. Pin count, pinout, and PCB land pattern differ, so a board redesign or layout change is required when substituting between them.
Both devices operate from a single supply of 2.7 V to 5.5 V, and they are also specified for dual-supply operation of ±1.35 V to ±2.75 V. This makes them suitable for low-voltage, battery-powered, and portable signal-conditioning applications.
Both the AD8544ARZ and AD8542AR-REEL7 feature rail-to-rail input and output (RRIO) capability, allowing signal swing to both supply rails. They have a typical input offset voltage of 1 mV (3 mV maximum) and low input bias current, which supports high-impedance sensor interfacing and single-supply signal conditioning.
The AD8544ARZ is supplied in a 14-lead SOIC (R-14) tube or tray format, while the AD8542AR-REEL7 is supplied in an 8-lead SOIC (R-8) on a 7-inch tape-and-reel, making it suited to automated high-volume SMT assembly lines. The reel suffix indicates the tape-and-reel packaging rather than a different silicon die.
The AD8544ARZ is preferable where four independent amplifier channels are needed in a compact footprint, such as multi-channel sensor signal conditioning, active filters, and instrumentation front ends. The AD8542AR-REEL7 is better suited to space-constrained dual-channel designs and high-volume automated assembly, such as portable medical devices, handheld instrumentation, and battery-powered monitoring systems.
Yes. Both the AD8544ARZ and AD8542AR-REEL7 are specified over the industrial temperature range of −40 °C to +125 °C and are fabricated using Analog Devices' CMOS process, providing low power consumption and stable performance across the operating range.