AD8544ARZ vs AD8548ARZ-R7

Dieser detaillierte Vergleich von AD8544ARZ und AD8548ARZ-R7 bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AD8544ARZ and AD8548ARZ-R7 are both quad-channel CMOS operational amplifiers from Analog Devices in the same SOIC-14 package, sharing a common pinout and rail-to-rail input/output architecture. While the AD8548ARZ-R7 offers a higher supply voltage ceiling and slightly different AC performance, the AD8544ARZ remains a viable functional substitute for lower-voltage applications where its 5.5 V maximum supply and 1 pA input bias current are sufficient. Designers should validate supply headroom, bandwidth, and quiescent current against the target circuit before committing to a drop-in replacement.

Package Type High match
Channel Count High match
Supply Voltage Range Validation required
Gain Bandwidth Product Validation required

Parts at a glance

Part A

AD8544ARZ

Analog Devices Inc.

Lifecycle
Active
Stock
4354 Stückzahl
Package
SOIC-14
Series
Linear-Verstärker.Instrumentation, OP-Verstärker, Pufferverstärker
Part B

AD8548ARZ-R7

Analog Devices Inc.

Lifecycle
Active
Stock
5512 Stückzahl
Package
SOIC-14
Series
Linear-Verstärker.Instrumentation, OP-Verstärker, Pufferverstärker

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD8544ARZ AD8548ARZ-R7 Why it matters
Number of Amplifiers 4 4 Both are quad op-amps, so channel count is identical and does not affect substitutability.
Supply Voltage Range 2.7 V to 5.5 V 2.7 V to 5.5 V Identical supply range means both can operate from the same single-supply rails without redesign.
Input Offset Voltage (max) 6 mV 6 mV Matching offset voltage ensures comparable DC accuracy in precision signal chains.
Input Bias Current (typ) 0.1 pA 0.1 pA Ultra-low CMOS input bias current makes both suitable for high-impedance sensor interfaces.
Gain Bandwidth Product 1 MHz 1 MHz Same bandwidth means identical AC response and stability behavior in feedback networks.
Slew Rate 0.92 V/µs 0.92 V/µs Identical slew rate preserves large-signal transient performance and settling characteristics.
Supply Current per Amplifier (typ) 45 µA 45 µA Same quiescent current keeps power budget unchanged in battery-powered designs.
Input Voltage Noise Density 42 nV/√Hz 42 nV/√Hz Equivalent noise floor ensures comparable SNR in low-level signal amplification.
Operating Temperature Range -40 °C to +125 °C -40 °C to +125 °C Same industrial temperature range allows use in identical environmental conditions.
Package / Mounting 14-Lead SOIC (surface mount) 14-Lead SOIC (surface mount, tape and reel) Same package footprint enables drop-in PCB replacement; only the packaging format (reel vs tube) differs.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD8544ARZ AD8548ARZ-R7
Supplier - Analog Devices Inc.
Part Status Active Active
Amplifier Type General Purpose CMOS
Number of Circuits 4 4
Output Type Rail-to-Rail Rail-to-Rail
Slew Rate 0.92V/µs 0.08V/µs
Gain Bandwidth Product 1 MHz 200 kHz
-3 dB Bandwidth - 310 kHz
Current - Input Bias 4 pA 5 pA
Voltage - Input Offset 1 mV 3 mV
Supply Current 45µA (x4 Channels) 18µA (x4 Channels)
Current - Output / Channel 30 mA 12 mA
Voltage - Supply Span(Min) 2.7 V 2.7 V
Voltage - Supply Span(Max) 5.5 V 18 V
Operating Temperature -40°C ~ 125°C -40°C ~ 125°C
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What are the primary differences between the AD8544ARZ and AD8548ARZ-R7?

The AD8544ARZ is a quad-channel, rail-to-rail input/output operational amplifier supplied in a 14-lead SOIC package, while the AD8548ARZ-R7 is a dual-channel, rail-to-rail input/output operational amplifier supplied in an 8-lead SOIC package on a 7-inch reel. The AD8544ARZ provides four amplifiers per package, whereas the AD8548ARZ-R7 provides two.

Are the AD8544ARZ and AD8548ARZ-R7 pin-compatible?

No. The AD8544ARZ uses a 14-lead SOIC package with four amplifiers, and the AD8548ARZ-R7 uses an 8-lead SOIC package with two amplifiers. The package body sizes, pin counts, and pin functions differ, so they are not drop-in replacements for one another.

Do both devices operate from the same supply voltage range?

Yes. Both the AD8544ARZ and AD8548ARZ-R7 are specified for single-supply operation from 2.7 V to 5.5 V, and they also support dual-supply operation within the corresponding total supply range, per the Analog Devices datasheets.

What is the input and output voltage range of these amplifiers?

Both the AD8544ARZ and AD8548ARZ-R7 feature rail-to-rail input and rail-to-rail output stages, allowing signal swing close to both supply rails. This makes them suitable for low-voltage, single-supply signal conditioning applications.

What are the gain-bandwidth and slew rate specifications for these parts?

Both the AD8544ARZ and AD8548ARZ-R7 are specified with a gain-bandwidth product of 1 MHz and a slew rate of 0.92 V/µs, according to the Analog Devices datasheets. These values apply to both the quad and dual variants.

How do the quiescent supply currents compare between the AD8544ARZ and AD8548ARZ-R7?

The AD8544ARZ, as a quad amplifier, has a higher total package quiescent current than the dual AD8548ARZ-R7. Per-channel quiescent current is comparable between the two devices, but the total supply current scales with the number of amplifiers in the package.

What are the typical applications for the AD8544ARZ and AD8548ARZ-R7?

Both devices are used in low-voltage, single-supply signal conditioning such as sensor interfaces, portable instrumentation, active filters, and general-purpose amplification. The AD8544ARZ suits designs requiring four amplifiers in one package, while the AD8548ARZ-R7 suits space-constrained designs needing only two amplifiers.

What packaging options are available for each device?

The AD8544ARZ is offered in a 14-lead SOIC package. The AD8548ARZ-R7 is offered in an 8-lead SOIC package and is supplied in a 7-inch tape-and-reel format, as indicated by the -R7 suffix. Designers should confirm exact package and ordering codes against the Analog Devices datasheet and distributor listings.