ADA4004-4ARZ
Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 4895 Stückzahl
- Package
- SOIC-14
- Series
- Linear-Verstärker.Instrumentation, OP-Verstärker, Pufferverstärker
Dieser detaillierte Vergleich von ADA4004-4ARZ und ADA4062-2ARZ bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.
Replacement verdict
The ADA4062-2ARZ and ADA4004-4ARZ are not functionally interchangeable: they differ in channel count, package footprint, supply voltage range, and quiescent current, so the ADA4004-4ARZ cannot directly replace the ADA4062-2ARZ without circuit and layout redesign.
Analog Devices Inc.
Analog Devices Inc.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADA4062-2ARZ | ADA4004-4ARZ | Why it matters |
|---|---|---|---|
| Number of Amplifiers | 2 | 4 | Determines how many independent amplifier channels are available in a single package, directly affecting circuit density and channel count. |
| Input Offset Voltage (Max) | 175 µV | 125 µV | Lower offset voltage improves DC precision; a difference here affects accuracy in high-gain or precision signal chains. |
| Input Bias Current (Typ) | 0.5 pA | 40 nA | Bias current impacts error in high-impedance circuits; the JFET-input ADA4062 offers far lower bias current than the bipolar ADA4004. |
| Gain Bandwidth Product | 1.4 MHz | 12 MHz | GBW sets the achievable closed-loop bandwidth and small-signal speed; the ADA4004 supports much wider bandwidth applications. |
| Slew Rate | 3.3 V/µs | 2.7 V/µs | Slew rate limits large-signal response and distortion at high frequencies; affects how fast the output can track input transients. |
| Input Voltage Noise Density (1 kHz) | 36 nV/√Hz | 10 nV/√Hz | Lower voltage noise improves SNR in low-level signal amplification; the ADA4004 is significantly quieter for precision sensing. |
| Supply Current per Amplifier (Typ) | 165 µA | 1.7 mA | Quiescent current drives power budget; the ADA4062 is far more power-efficient, suited to battery-powered designs. |
| Supply Voltage Range | ±5 V to ±15 V | ±5 V to ±15 V | Defines the allowable power supply window; matching ranges allow drop-in use in the same supply rails. |
| Operating Temperature Range | -40 °C to +125 °C | -40 °C to +125 °C | Confirms both parts are rated for industrial/extended temperature environments, ensuring reliability under the same conditions. |
| Package | 8-Lead SOIC | 14-Lead SOIC | Package footprint and pin count affect PCB layout and cannot be directly substituted without board redesign. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADA4004-4ARZ | ADA4062-2ARZ |
|---|---|---|
| Series | iPolar® | - |
| Part Status | Active | Active |
| Amplifier Type | General Purpose | J-FET |
| Number of Circuits | 4 | 2 |
| Slew Rate | 2.7V/µs | 3.3V/µs |
| Gain Bandwidth Product | 12 MHz | 1.4 MHz |
| Current - Input Bias | 40 nA | 2 pA |
| Voltage - Input Offset | 40 µV | 750 µV |
| Current - Output / Channel | 10 mA | 20 mA |
| Voltage - Supply Span(Min) | 10 V | 8 V |
| Voltage - Supply Span(Max) | 30 V | 36 V |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 125°C |
| Mounting Type | Surface Mount | Surface Mount |
| Supply Current | - | 165µA (x2 Channels) |
The ADA4062-2ARZ is a dual-channel, low-power JFET-input operational amplifier, while the ADA4004-4ARZ is a quad-channel, precision bipolar-input operational amplifier. The ADA4062-2ARZ offers low input bias current and low power consumption, whereas the ADA4004-4ARZ provides lower voltage noise and higher precision, making them suited to different application requirements.
The ADA4062-2ARZ integrates two operational amplifiers in a single package, while the ADA4004-4ARZ integrates four operational amplifiers. This difference affects PCB layout density and the number of signal channels that can be implemented per package.
The ADA4062-2ARZ uses a JFET input stage, which provides very low input bias current, typically in the picoampere range. The ADA4004-4ARZ uses a bipolar input stage, which has higher input bias current than the JFET-input ADA4062-2ARZ. The lower bias current of the ADA4062-2ARZ benefits high-impedance sensor interfaces.
The ADA4004-4ARZ is specified with low voltage noise density, making it suitable for precision signal conditioning where noise performance is critical. The ADA4062-2ARZ has higher voltage noise density than the ADA4004-4ARZ. Designs prioritizing low noise should evaluate the ADA4004-4ARZ, while low-power, high-impedance applications may favor the ADA4062-2ARZ.
No. The ADA4062-2ARZ is a dual op-amp in an 8-lead SOIC package, while the ADA4004-4ARZ is a quad op-amp in a 14-lead SOIC package. The different package sizes and pin counts mean they are not pin-compatible and cannot be directly substituted without PCB redesign.
The ADA4062-2ARZ is well suited to low-power, high-impedance signal chains such as photodiode and pH sensor interfaces, where low input bias current is important. The ADA4004-4ARZ is suited to precision, low-noise multichannel applications such as instrumentation amplifiers and active filters, where low offset and low voltage noise are required.
The ADA4062-2ARZ is designed for low power consumption, with a low supply current per amplifier. The ADA4004-4ARZ, as a precision quad op-amp, draws more total supply current per package due to its four channels and bipolar input stage. Power-sensitive designs should account for the total quiescent current of each package.
Both devices are specified for operation on dual supplies in the range of ±5 V to ±15 V, as well as single-supply configurations within their specified limits. Designers should verify the exact supply range and output swing requirements against the respective manufacturer datasheets for the target operating conditions.