ADA4077-2ARZ
Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 5777 Stückzahl
- Package
- SOIC-8
- Series
- Linear-Verstärker.Instrumentation, OP-Verstärker, Pufferverstärker
Dieser detaillierte Vergleich von ADA4077-2ARZ und ADA4004-4ARZ bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.
Replacement verdict
The ADA4004-4ARZ and ADA4077-2ARZ are not drop-in replacements for one another. The ADA4004-4ARZ is a quad-channel amplifier in a 14-lead SOIC package, while the ADA4077-2ARZ is a dual-channel amplifier in an 8-lead SOIC package, so the two devices differ in channel count, package footprint, and pinout. Designers must verify board layout, channel requirements, and circuit topology before considering any substitution between these part numbers.
Analog Devices Inc.
Analog Devices Inc.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADA4004-4ARZ | ADA4077-2ARZ | Why it matters |
|---|---|---|---|
| Number of Amplifiers | 4 | 2 | Determines how many independent op-amp channels are available in a single package, directly affecting circuit density and channel count. |
| Input Offset Voltage (Max) | 125 µV | 25 µV | Lower offset voltage improves DC accuracy and reduces output error in precision signal-conditioning applications. |
| Input Voltage Noise Density (1 kHz) | 1.8 nV/√Hz | 7 nV/√Hz | Lower voltage noise is critical for low-level signal amplification and high-resolution measurement systems. |
| Gain Bandwidth Product | 12 MHz | 3.6 MHz | GBW sets the achievable closed-loop bandwidth and slew performance for a given gain configuration. |
| Slew Rate | 2.7 V/µs | 1.2 V/µs | Slew rate limits large-signal response speed and affects distortion at higher frequencies. |
| Supply Current per Amplifier (Typ) | 1.7 mA | 0.4 mA | Quiescent current impacts power budget and thermal design, especially in portable or high-channel-count systems. |
| Input Bias Current (Typ) | 90 nA | 1 nA | Lower bias current reduces errors in high-impedance sensor and feedback networks. |
| Supply Voltage Range | ±5 V to ±15 V | ±2.5 V to ±15 V | Wider supply range enables operation in low-voltage systems and affects compatibility with existing power rails. |
| Package | 14-Lead SOIC | 8-Lead SOIC | Package footprint and pin count affect PCB layout, board space, and drop-in compatibility. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADA4077-2ARZ | ADA4004-4ARZ |
|---|---|---|
| Part Status | Active | Active |
| Amplifier Type | General Purpose | General Purpose |
| Number of Circuits | 2 | 4 |
| Slew Rate | 1.2V/µs | 2.7V/µs |
| Gain Bandwidth Product | 3.6 MHz | 12 MHz |
| -3 dB Bandwidth | 5.5 MHz | - |
| Current - Input Bias | 400 pA | 40 nA |
| Voltage - Input Offset | 15 µV | 40 µV |
| Supply Current | 400µA (x2 Channels) | - |
| Current - Output / Channel | 10 mA | 10 mA |
| Voltage - Supply Span(Min) | 5 V | 10 V |
| Voltage - Supply Span(Max) | 30 V | 30 V |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 125°C |
| Mounting Type | Surface Mount | Surface Mount |
| Series | - | iPolar® |
The ADA4004-4ARZ is a quad (four-channel) precision operational amplifier in a 14-lead SOIC package, while the ADA4077-2ARZ is a dual (two-channel) precision op amp in an 8-lead SOIC package. Both are low-noise, low-offset-voltage bipolar amplifiers from Analog Devices, but they differ in channel count, package size, and quiescent current per package.
No. The ADA4004-4ARZ uses a 14-lead SOIC (R-14) package with four amplifiers, while the ADA4077-2ARZ uses an 8-lead SOIC (R-8) package with two amplifiers. The pin counts, pin functions, and PCB land patterns differ, so they are not drop-in replacements for each other.
Both the ADA4004-4ARZ and ADA4077-2ARZ are specified for dual-supply operation of ±4 V to ±15 V (or equivalent single-supply ranges within that span), per Analog Devices datasheets. Designs should verify the exact specified operating range against the latest manufacturer datasheet before use.
Both parts are precision bipolar amplifiers targeting low offset voltage and low voltage noise. The ADA4004-4ARZ is specified with very low offset voltage (tens of microvolts, typical) and low voltage noise density, and the ADA4077-2ARZ is similarly specified as a low-noise, low-offset precision amplifier. Exact limits should be taken from the respective Analog Devices datasheets, as grades and test conditions affect the guaranteed values.
Functionally, both are precision op amps, but a direct substitution requires validating package footprint, channel count, supply range, offset, noise, bandwidth, and load-driving requirements against the manufacturer datasheets. Because the packages and channel counts differ, a PCB redesign or adapter would be required; the parts are not interchangeable without design verification.
Both the ADA4004-4ARZ and ADA4077-2ARZ are suited to precision signal conditioning such as instrumentation, sensor interfacing, active filtering, and data acquisition front ends where low offset and low noise are important. The quad ADA4004-4ARZ suits multi-channel boards, while the dual ADA4077-2ARZ suits compact two-channel designs.
Both are offered in industrial temperature grade versions (typically −40 °C to +125 °C) per Analog Devices documentation. Confirm the exact grade and temperature range on the specific ordering part number and datasheet before finalizing a design.