ADA4077-2ARZ vs ADA4062-2BRZ-RL

Dieser detaillierte Vergleich von ADA4077-2ARZ und ADA4062-2BRZ-RL bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADA4062-2BRZ-RL is a viable functional replacement candidate for the ADA4077-2ARZ in many low-power, low-frequency signal conditioning applications, provided the reduced bandwidth, slew rate, and common-mode input range are validated against the target circuit requirements. Both devices share the same dual op-amp configuration and SOIC-8 footprint, but the ADA4062-2 trades AC performance and precision for substantially lower supply current, so designers must confirm that the application does not depend on the ADA4077-2's higher gain-bandwidth, faster slew rate, or tighter offset specifications before substituting.

Package Type High match
Channel Count High match
Gain Bandwidth Product Validation required
Supply Current Validation required

Parts at a glance

Part A

ADA4077-2ARZ

Analog Devices Inc.

Lifecycle
Active
Stock
5777 Stückzahl
Package
SOIC-8
Series
Linear-Verstärker.Instrumentation, OP-Verstärker, Pufferverstärker
Part B

ADA4062-2BRZ-RL

Analog Devices Inc.

Lifecycle
Active
Stock
9861 Stückzahl
Package
SOIC-8
Series
Linear-Verstärker.Instrumentation, OP-Verstärker, Pufferverstärker

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADA4077-2ARZ ADA4062-2BRZ-RL Why it matters
Number of Amplifiers 2 2 Both are dual op-amps, so channel count is compatible for direct substitution in dual-amplifier circuits.
Input Offset Voltage (Max) 25 µV 250 µV Lower offset voltage improves DC precision; the ADA4077-2 is roughly an order of magnitude more precise, which matters in high-accuracy signal chains.
Input Bias Current (Typ) 0.5 nA 2 pA Bias current affects error in high-impedance circuits; the ADA4062-2 JFET input offers far lower bias current for electrometer-like or high-source-impedance applications.
Gain Bandwidth Product 3.6 MHz 1.4 MHz GBW determines achievable closed-loop bandwidth; the ADA4077-2 supports wider-bandwidth signal processing than the ADA4062-2.
Slew Rate 1.2 V/µs 0.5 V/µs Slew rate limits large-signal response; the ADA4077-2 handles faster transients and higher-frequency large signals.
Input Voltage Noise Density (1 kHz) 7 nV/√Hz 36 nV/√Hz Lower voltage noise improves SNR in low-level signal amplification; the ADA4077-2 is significantly quieter.
Supply Voltage Range ±2.5 V to ±15 V (5 V to 30 V) ±5 V to ±15 V (10 V to 30 V) The ADA4077-2 operates at lower supply voltages, enabling use in 5 V single-supply systems where the ADA4062-2 cannot operate.
Input Stage Technology Bipolar JFET Bipolar inputs offer lower voltage noise and better DC precision, while JFET inputs offer extremely low bias current; this affects the choice for high-impedance vs low-noise applications.
Quiescent Current per Amplifier (Typ) 0.4 mA 0.25 mA Lower quiescent current reduces power consumption; the ADA4062-2 is more suitable for power-sensitive designs.
Operating Temperature Range -40 °C to +125 °C -40 °C to +125 °C Both cover the industrial/extended temperature range, so thermal compatibility is maintained for substitution.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADA4077-2ARZ ADA4062-2BRZ-RL
Supplier - Analog Devices Inc.,Rochester Electronics, LLC
Part Status Active Obsolete
Amplifier Type General Purpose J-FET
Number of Circuits 2 2
Slew Rate 1.2V/µs 3.3V/µs
Gain Bandwidth Product 3.6 MHz 1.4 MHz
Current - Input Bias 400 pA 2 pA
Voltage - Input Offset 15 µV 500 µV
Supply Current 400µA (x2 Channels) 165µA (x2 Channels)
Current - Output / Channel 10 mA 20 mA
Voltage - Supply Span(Min) 5 V 8 V
Voltage - Supply Span(Max) 30 V 36 V
Operating Temperature -40°C ~ 125°C -40°C ~ 125°C
Mounting Type Surface Mount Surface Mount
-3 dB Bandwidth 5.5 MHz -

Frequently asked questions

What are the key differences between the ADA4077-2ARZ and ADA4062-2BRZ-RL?

The ADA4077-2ARZ is a dual, low-noise, low-offset-voltage operational amplifier from Analog Devices with a typical offset voltage of 25 µV and a typical voltage noise density of 7 nV/√Hz at 1 kHz, housed in an 8-lead SOIC package. The ADA4062-2BRZ-RL is a dual, low-power JFET-input operational amplifier with very low input bias current (typically 1 pA) and a typical supply current of 200 µA per amplifier, supplied in an 8-lead SOIC package on tape and reel. The ADA4077-2 is optimized for precision DC accuracy and low noise, while the ADA4062-2 is optimized for high input impedance and low power consumption.

Are the ADA4077-2ARZ and ADA4062-2BRZ-RL pin-compatible?

Both devices are offered in an 8-lead SOIC package with the standard dual op-amp pinout (1: OUT A, 2: −IN A, 3: +IN A, 4: V−, 5: +IN B, 6: −IN B, 7: OUT B, 8: V+). However, pin compatibility alone does not guarantee functional interchangeability; the surrounding circuit must be validated against each device's input bias current, input common-mode range, and supply requirements.

Which device has lower input bias current, the ADA4077-2ARZ or the ADA4062-2BRZ-RL?

The ADA4062-2BRZ-RL has a substantially lower input bias current, typically 1 pA at 25°C, owing to its JFET input stage. The ADA4077-2ARZ uses a bipolar input stage with a typical input bias current of 1 nA. For high-source-impedance applications such as photodiode or pH sensor front ends, the ADA4062-2 is generally the more suitable choice.

How do the noise characteristics of the ADA4077-2ARZ and ADA4062-2BRZ-RL compare?

The ADA4077-2ARZ is specified with a typical voltage noise density of 7 nV/√Hz at 1 kHz, making it suitable for low-noise precision signal conditioning. The ADA4062-2BRZ-RL has a higher typical voltage noise density of approximately 36 nV/√Hz at 1 kHz. For applications where voltage noise is critical, the ADA4077-2 is the better fit; for high-impedance, low-power applications, the ADA4062-2's low current noise and low bias current may be more important.

What are the supply voltage and quiescent current specifications for each device?

The ADA4077-2ARZ operates from a dual supply of ±2.5 V to ±15 V (or 5 V to 30 V single supply) with a typical supply current of 400 µA per amplifier. The ADA4062-2BRZ-RL operates from ±4.5 V to ±18 V (or 9 V to 36 V single supply) with a typical supply current of 200 µA per amplifier. The ADA4062-2 therefore offers lower power consumption, while the ADA4077-2 supports lower minimum supply voltages.

Can the ADA4062-2BRZ-RL be used as a direct replacement for the ADA4077-2ARZ in a precision DC application?

Not without careful evaluation. The ADA4077-2ARZ offers a typical offset voltage of 25 µV and low offset drift, whereas the ADA4062-2BRZ-RL has a higher typical offset voltage (on the order of millivolts) and different drift behavior. In precision DC applications, substituting the ADA4062-2 for the ADA4077-2 would likely degrade accuracy, so the circuit must be re-validated against the target error budget.

What are the operating temperature ranges for the ADA4077-2ARZ and ADA4062-2BRZ-RL?

Both the ADA4077-2ARZ and the ADA4062-2BRZ-RL are specified for the industrial temperature range of −40°C to +125°C, making them suitable for industrial and instrumentation applications requiring extended temperature operation.

Which device is better suited for high-impedance sensor interfaces?

The ADA4062-2BRZ-RL is generally better suited for high-impedance sensor interfaces because its JFET input stage provides very low input bias current (typically 1 pA) and high input impedance, minimizing loading and offset errors. The ADA4077-2ARZ, with its bipolar input stage and 1 nA typical bias current, is better suited to lower-impedance precision signal chains where low voltage noise and low offset voltage are the dominant requirements.