ADA4077-2ARZ
Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 5777 Stückzahl
- Package
- SOIC-8
- Series
- Linear-Verstärker.Instrumentation, OP-Verstärker, Pufferverstärker
Dieser detaillierte Vergleich von ADA4077-2ARZ und ADA4000-2ARZ-RL bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.
Replacement verdict
The ADA4000-2ARZ-RL is a viable functional replacement candidate for the ADA4077-2ARZ in applications where moderate precision and higher speed are acceptable, since both share the same dual op-amp configuration and SOIC-8 package. However, the ADA4077-2ARZ offers superior DC precision and lower noise, so the ADA4000-2ARZ-RL should only be substituted after validating offset, drift, and noise requirements against the target circuit.
Analog Devices Inc.
Analog Devices Inc.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADA4077-2ARZ | ADA4000-2ARZ-RL | Why it matters |
|---|---|---|---|
| Number of Amplifiers | 2 | 2 | Both are dual op-amps, so channel count is compatible for direct substitution in dual-amplifier circuits. |
| Input Offset Voltage (Max) | 25 µV | 1.5 mV | Lower offset voltage reduces DC error; the ADA4077 is far more precise, which matters in high-accuracy signal chains. |
| Input Bias Current (Typ) | 0.5 nA | 5 pA | Bias current affects error in high-impedance circuits; the ADA4000 has much lower bias current, favoring high-impedance sensor interfaces. |
| Gain Bandwidth Product | 3.6 MHz | 5 MHz | GBW determines achievable closed-loop bandwidth; the ADA4000 offers wider bandwidth for faster signal processing. |
| Slew Rate | 1.2 V/µs | 20 V/µs | Higher slew rate supports larger/faster signal swings without distortion; the ADA4000 is better for high-speed or large-signal applications. |
| Input Voltage Noise Density | 7 nV/√Hz | 16 nV/√Hz | Lower voltage noise improves SNR in low-level signal amplification; the ADA4077 is preferable for precision low-noise designs. |
| Supply Voltage Range | ±2.5 V to ±15 V | ±4 V to ±18 V | Operating supply range must cover the system rails; the ADA4000 tolerates higher supply voltages while the ADA4077 works at lower rails. |
| Quiescent Current per Amplifier (Typ) | 0.4 mA | 1.65 mA | Lower quiescent current reduces power consumption; the ADA4077 is better suited for power-sensitive designs. |
| Package | 8-Lead SOIC | 8-Lead SOIC | Matching package and pinout allows drop-in board replacement without layout changes. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADA4077-2ARZ | ADA4000-2ARZ-RL |
|---|---|---|
| Supplier | - | Analog Devices Inc.,Rochester Electronics, LLC |
| Part Status | Active | Active |
| Amplifier Type | General Purpose | J-FET |
| Number of Circuits | 2 | 2 |
| Slew Rate | 1.2V/µs | 20V/µs |
| Gain Bandwidth Product | 3.6 MHz | 5 MHz |
| Current - Input Bias | 400 pA | 5 pA |
| Voltage - Input Offset | 15 µV | 200 µV |
| Supply Current | 400µA (x2 Channels) | 1.35mA (x2 Channels) |
| Current - Output / Channel | 10 mA | 28 mA |
| Voltage - Supply Span(Min) | 5 V | 8 V |
| Voltage - Supply Span(Max) | 30 V | 36 V |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 125°C |
| Mounting Type | Surface Mount | Surface Mount |
| -3 dB Bandwidth | 5.5 MHz | - |
The ADA4077-2ARZ is a dual, low-noise, precision operational amplifier with a typical input offset voltage of 25 µV and a gain bandwidth product of 3.9 MHz. The ADA4000-2ARZ-RL is a dual, high-speed JFET-input operational amplifier with a typical input bias current of 5 pA and a gain bandwidth product of 12 MHz. The ADA4077-2 is optimized for DC precision and low noise, while the ADA4000-2 is optimized for high speed and low input bias current.
Both devices are offered in 8-lead SOIC packages and use the standard dual op-amp pinout (1: OUT A, 2: -IN A, 3: +IN A, 4: V-, 5: +IN B, 6: -IN B, 7: OUT B, 8: V+). This means they are pin-compatible in the SOIC-8 package, but circuit performance must still be validated for the target application.
The ADA4077-2ARZ is the better choice for low-noise precision signal conditioning. It offers a typical voltage noise density of 7 nV/√Hz at 1 kHz and a typical input offset voltage of 25 µV, making it suitable for precision DC and low-frequency applications. The ADA4000-2ARZ-RL has higher voltage noise and is intended for high-speed applications rather than precision DC signal conditioning.
The ADA4000-2ARZ-RL is better suited for high-speed and high-impedance sensor interfaces. Its JFET input provides a typical input bias current of 5 pA, and its 12 MHz gain bandwidth product supports higher-frequency signal processing. The ADA4077-2ARZ has a bipolar input with higher input bias current and a lower 3.9 MHz gain bandwidth product.
Both the ADA4077-2ARZ and ADA4000-2ARZ-RL operate from dual supplies of ±4 V to ±15 V (or equivalent single supplies of 8 V to 30 V), per the respective manufacturer datasheets. Designers should verify the exact supply limits and output swing requirements against the datasheet for the specific operating conditions.
Not without validation. Although both are dual op-amps in an 8-lead SOIC package with the same pinout, the ADA4000-2ARZ-RL has different DC and noise characteristics, including higher offset voltage and higher voltage noise than the ADA4077-2ARZ. A direct replacement may degrade precision and low-noise performance, so the circuit must be re-evaluated against the ADA4000-2 datasheet.
The ADA4000-2ARZ-RL uses a JFET input stage with a typical input bias current of 5 pA, while the ADA4077-2ARZ uses a bipolar input stage with a significantly higher input bias current. This makes the ADA4000-2 preferable for high-impedance sources, while the ADA4077-2 is intended for precision low-frequency circuits where its lower offset and noise are advantageous.
Both the ADA4077-2ARZ and ADA4000-2ARZ-RL are specified for the industrial temperature range of −40 °C to +125 °C, as stated in their respective manufacturer datasheets. Designers should confirm the exact grade and temperature specifications for the ordered part number before use.