ADF41513BCPZ vs ADF4159CCPZ-RL7

Dieser detaillierte Vergleich von ADF41513BCPZ und ADF4159CCPZ-RL7 bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADF41513BCPZ is a viable functional replacement candidate for the ADF4159CCPZ-RL7 in fractional-N PLL synthesizer applications, offering a higher maximum RF input frequency and wider operating range, though the designer must validate loop filter design, charge pump current settings, and digital interface timing against the specific system requirements before committing to the substitution.

Package Type Validation required
Operating Frequency Range Validation required
Charge Pump Current Validation required
Digital Interface Validation required

Parts at a glance

Part A

ADF41513BCPZ

Analog Devices Inc.

Lifecycle
Active
Stock
6981 Stückzahl
Package
WFQFN-24
Series
Clock-Timing mit Taktgeneratoren, PLLs, Frequenzsynthesizer
Part B

ADF4159CCPZ-RL7

Analog Devices Inc.

Lifecycle
Active
Stock
5050 Stückzahl
Package
WFQFN-24
Series
Clock-Timing mit Taktgeneratoren, PLLs, Frequenzsynthesizer

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADF4159CCPZ-RL7 ADF41513BCPZ Why it matters
Maximum RF Input Frequency 13 GHz 13 GHz Sets the highest frequency the PLL can synthesize; both cover up to 13 GHz, so neither limits high-band operation.
Maximum PFD Frequency 110 MHz 250 MHz A higher phase-frequency detector rate allows wider loop bandwidth and faster settling; the ADF41513 supports a significantly higher PFD rate.
Normalized Phase Noise (PN floor) -224 dBc/Hz -233 dBc/Hz Lower normalized phase noise yields cleaner synthesized signals; the ADF41513 offers roughly 9 dB better phase-noise performance.
Modulus / Fractional Resolution 25-bit (up to 33.5 million) 25-bit (up to 33.5 million) Determines frequency step resolution in fractional mode; both provide fine 25-bit resolution for precise channel spacing.
Integrated VCO No No Neither device integrates a VCO, so an external VCO is required in both cases; this affects board design and BOM.
Supply Voltage 3.0 V to 3.6 V 3.0 V to 3.6 V Defines the required power rail; both operate from the same 3.3 V nominal supply, simplifying substitution.
Package 32-Lead LFCSP (5x5 mm) 32-Lead LFCSP (5x5 mm) Package footprint and pin count affect PCB layout compatibility; both use the same 32-lead LFCSP, aiding drop-in replacement.
Operating Temperature Range -40°C to +85°C -40°C to +85°C Determines environmental suitability; identical industrial temperature ranges mean equivalent ruggedness.
Interface 3-wire SPI 3-wire SPI Defines the digital control bus; both use a 3-wire SPI interface, so host firmware architecture is compatible.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADF41513BCPZ ADF4159CCPZ-RL7
Part Status Active Active
Type Integer-N/Fractional-N -
PLL Yes Yes
Input CML, CMOS CMOS, TTL
Output Clock CMOS
Number of Circuits 1 1
Ratio - Input: Output 2:1 2:1
Differential - Input: Output Yes/No Yes/No
Frequency - Max 26.5GHz 13GHz
Divider / Multiplier Yes/Yes Yes/Yes
Voltage - Supply 3.135V ~ 3.465V 1.62V ~ 3.45V
Operating Temperature -40°C ~ 105°C -40°C ~ 125°C
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What are the key differences between the ADF4159CCPZ-RL7 and the ADF41513BCPZ?

The ADF4159CCPZ-RL7 is a 13 GHz fractional-N frequency synthesizer with integrated waveform generation (ramp/modulation) capability, while the ADF41513BCPZ is a 26.5 GHz fractional-N/integer-N PLL synthesizer without the built-in ramp generation feature. The ADF41513BCPZ offers a higher maximum RF input frequency and wider operating range, whereas the ADF4159CCPZ-RL7 is optimized for frequency-modulated waveform applications such as radar and FMCW systems.

What is the maximum RF input frequency for each device?

The ADF4159CCPZ-RL7 supports RF input frequencies up to 13 GHz. The ADF41513BCPZ supports RF input frequencies up to 26.5 GHz, making it suitable for higher-frequency applications such as microwave and millimeter-wave systems.

Do both devices support fractional-N operation?

Yes. Both the ADF4159CCPZ-RL7 and the ADF41513BCPZ are fractional-N frequency synthesizers. The ADF41513BCPZ additionally supports integer-N mode, providing flexibility for applications requiring either fractional or integer operation.

Which device is better suited for FMCW radar and waveform generation applications?

The ADF4159CCPZ-RL7 is specifically designed with integrated ramp and modulation generation capability, making it well suited for FMCW radar and frequency-modulated waveform applications. The ADF41513BCPZ does not include this built-in waveform generation feature, so it is more appropriate for general-purpose high-frequency synthesis.

Are the ADF4159CCPZ-RL7 and ADF41513BCPZ pin-compatible or package-compatible?

No. The ADF4159CCPZ-RL7 is supplied in a 24-lead LFCSP package, while the ADF41513BCPZ is supplied in a 32-lead LFCSP package. The different package sizes and pin counts mean they are not drop-in replacements for each other, and PCB layouts must be designed accordingly.

What are the typical supply voltage requirements for these devices?

Both the ADF4159CCPZ-RL7 and the ADF41513BCPZ operate from a nominal 3.3 V supply, with an allowed analog and digital supply range of approximately 3.0 V to 3.6 V, consistent with Analog Devices PLL synthesizer specifications. Designers should confirm exact limits in the respective datasheets.

Can the ADF41513BCPZ replace the ADF4159CCPZ-RL7 in an existing design?

Not directly. Although both are fractional-N synthesizers, the ADF41513BCPZ has a different package (32-lead vs 24-lead LFCSP), a higher maximum RF frequency (26.5 GHz vs 13 GHz), and lacks the integrated ramp/modulation generation of the ADF4159CCPZ-RL7. A replacement requires schematic, layout, and firmware changes, and the design must be revalidated against the target application requirements.