ADM3050EBRIZ vs ADM3054BRWZ

Dieser detaillierte Vergleich von ADM3050EBRIZ und ADM3054BRWZ bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADM3050EBRIZ is a functional replacement candidate for the ADM3054BRWZ in isolated CAN applications, sharing the same isolated CAN transceiver function, SOIC-16 package footprint, and 5 kV rms isolation rating. However, the ADM3050EBRIZ offers higher data rates and a wider supply voltage range, so system-level validation of timing, supply, and bus loading is recommended before direct substitution.

Function and Protocol High match
Package Type High match
Data Rate Validation required
Supply Voltage Range Validation required

Parts at a glance

Part A

ADM3050EBRIZ

Analog Devices Inc.

Lifecycle
Active
Stock
5255 Stückzahl
Package
SOIC-8
Series
Interface-Treiber, Empfänger, Transceiver
Part B

ADM3054BRWZ

Analog Devices Inc.

Lifecycle
Active
Stock
5622 Stückzahl
Package
SOIC-16
Series
Interface-Treiber, Empfänger, Transceiver

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADM3054BRWZ ADM3050EBRIZ Why it matters
Data Rate 1 Mbps 12 Mbps Maximum bus speed supported; the higher-rate part can replace the lower-rate one in faster networks but not vice versa.
Isolation Rating 5 kV rms 5.7 kV rms Determines the safe galvanic isolation level between the bus and logic side; higher rating offers greater safety margin.
Supply Voltage (VCC) 5 V (single supply) 5 V (VCC1) / 5 V (VCC2, isolated) Defines the required power rails; differences affect board-level power design and whether a separate isolated supply is needed.
Package 16-Lead SOIC_W 16-Lead SOIC_W Footprint compatibility; identical package allows drop-in PCB replacement without layout changes.
Operating Temperature Range -40°C to +85°C -40°C to +105°C Wider temperature range enables use in harsher industrial environments and provides margin in high-ambient designs.
Number of Channels 1 Tx / 1 Rx (transceiver) 1 Tx / 1 Rx (transceiver) Channel count must match the bus topology; both are single-channel CAN transceivers, so functional role is equivalent.
Isolation Technology iCoupler (magnetic) iCoupler (magnetic) Same isolation technology ensures comparable reliability, transient immunity, and lifetime characteristics.
Common-Mode Transient Immunity 25 kV/µs 100 kV/µs Higher CMTI improves robustness against fast common-mode transients in noisy industrial environments.
Fail-Safe Receiver Yes Yes Fail-safe behavior guarantees a defined logic output on an idle or open bus, preventing spurious data.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADM3050EBRIZ ADM3054BRWZ
Series iCoupler® iCoupler®
Part Status Active Active
Type Transceiver, Isolated Transceiver, Isolated
Protocol CAN CAN
Number of Drivers/Receivers 1/1 1/1
Receiver Hysteresis 150 mV -
Data Rate 12Mbps 1Mbps
Voltage - Supply 0.5V ~ 6V 0.5V ~ 6V
Operating Temperature -40°C ~ 125°C -40°C ~ 125°C
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What are the key differences between the ADM3054BRWZ and ADM3050EBRIZ?

The ADM3054BRWZ is a 5 kV rms isolated CAN transceiver in a 16-lead SOIC_W package that integrates a digital isolator and a CAN transceiver, supporting data rates up to 1 Mbps. The ADM3050EBRIZ is a 5 kV rms signal and power isolated CAN FD transceiver in a 20-lead SOIC_W package supporting data rates up to 12 Mbps, with an integrated isolated DC-to-DC converter. The ADM3050EBRIZ supports CAN FD, while the ADM3054BRWZ is specified for classic CAN.

Are the ADM3054BRWZ and ADM3050EBRIZ pin-to-pin compatible?

No. The ADM3054BRWZ is supplied in a 16-lead SOIC_W package, while the ADM3050EBRIZ is supplied in a 20-lead SOIC_W package. The different pin counts and pin functions mean they are not drop-in replacements and require different PCB land patterns.

Do both devices provide galvanic isolation, and at what rating?

Yes. Both the ADM3054BRWZ and ADM3050EBRIZ are 5 kV rms isolated CAN transceivers per their respective Analog Devices datasheets, providing galvanic isolation between the logic-side and bus-side domains.

Does the ADM3050EBRIZ support CAN FD while the ADM3054BRWZ does not?

Yes. The ADM3050EBRIZ is specified for CAN FD operation with data rates up to 12 Mbps, whereas the ADM3054BRWZ is specified for classic CAN with data rates up to 1 Mbps. Designs requiring CAN FD payloads and higher bit rates should use the ADM3050EBRIZ.

Does the ADM3050EBRIZ include integrated isolated power while the ADM3054BRWZ requires external isolation for power?

Yes. The ADM3050EBRIZ integrates an isolated DC-to-DC converter to supply the bus-side circuitry, whereas the ADM3054BRWZ provides signal isolation only and requires an external isolated power supply for the bus side.

What are the supply voltage requirements for each device?

The ADM3054BRWZ operates from a single 5 V supply on the logic side (VCC) with the bus side powered through the isolation barrier arrangement defined in its datasheet. The ADM3050EBRIZ operates from a 5 V supply on the logic side (VCC) and generates the isolated bus-side supply through its integrated DC-to-DC converter. Refer to the respective Analog Devices datasheets for exact supply and current specifications.

Can the ADM3054BRWZ be replaced by the ADM3050EBRIZ in an existing design?

Not as a direct drop-in replacement. The ADM3050EBRIZ has a different package (20-lead versus 16-lead SOIC_W), different pinout, integrated isolated power, and CAN FD capability. A redesign of the PCB land pattern and validation of the power, timing, and bus-side circuitry against the ADM3050EBRIZ datasheet are required before substitution.