ADM489ARZ vs ADM4851AR

Dieser detaillierte Vergleich von ADM489ARZ und ADM4851AR bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADM489ARZ and ADM4851AR are both half-duplex RS-485 transceivers in 14-pin SOIC packages with 5 V supply and similar data rates, making the ADM4851AR a viable functional replacement candidate for the ADM489ARZ in many designs. However, the ADM489ARZ integrates a charge pump for full RS-232-level compliance and includes a shutdown feature, while the ADM4851AR offers a wider common-mode range and higher ESD tolerance; designers should validate supply decoupling, enable/shutdown pin handling, and bus loading before final substitution.

Package Type High match
Data Rate High match
Supply Voltage Validation required
Integrated Charge Pump Not compatible

Parts at a glance

Part A

ADM489ARZ

Analog Devices Inc.

Lifecycle
Active
Stock
3659 Stückzahl
Package
SOIC-14
Series
Interface-Treiber, Empfänger, Transceiver
Part B

ADM4851AR

Analog Devices Inc.

Lifecycle
Active
Stock
5492 Stückzahl
Package
SOIC-8
Series
Interface-Treiber, Empfänger, Transceiver

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADM489ARZ ADM4851AR Why it matters
Data Rate 250 kbps 500 kbps Maximum signaling speed; the faster device supports higher throughput links and may be required for timing-critical buses.
Duplex Mode Full duplex Half duplex Full duplex allows simultaneous transmit and receive, while half duplex shares the bus; this fundamentally changes wiring and protocol compatibility.
Number of Drivers / Receivers 1 / 1 1 / 1 Defines the transceiver channel count; both are single-channel, so node count per bus is comparable.
Receiver Input Impedance (Unit Loads) 1 unit load (12 kΩ) 1/8 unit load (96 kΩ) Lower unit load allows more nodes on a single RS-485 bus; the 1/8-load device supports up to 256 nodes versus 32.
Fail-Safe Receiver Yes (open-circuit) Yes (open/short-circuit) Fail-safe biasing guarantees a defined logic level when the bus is idle or floating, preventing spurious data.
Supply Voltage 5 V 5 V Operating supply rail; both require a 5 V supply, so power design is compatible.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Industrial temperature range ensures reliable operation in harsh environments; identical ranges mean equivalent thermal suitability.
Package 8-lead SOIC 8-lead SOIC Footprint and assembly compatibility; identical packages allow drop-in board replacement.
ESD Protection (Bus Pins) ±15 kV (HBM) ±15 kV (HBM) Robust ESD protection improves field reliability; matching ratings indicate comparable ruggedness.
Driver Output Voltage (Loaded) 2.0 V min (54 Ω load) 2.0 V min (54 Ω load) Differential output swing determines noise margin and bus length capability; identical minimums indicate similar drive strength.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADM489ARZ ADM4851AR
Supplier - Rochester Electronics, LLC
Part Status Active Obsolete
Type Transceiver Transceiver
Protocol RS422, RS485 RS422, RS485
Number of Drivers/Receivers 1/1 1/1
Voltage - Supply 4.5V ~ 5.5V 4.75V ~ 5.25V
Mounting Type Surface Mount Surface Mount
Duplex Full -
Receiver Hysteresis 70 mV -
Data Rate 250kbps -
Operating Temperature -40°C ~ 85°C -

Frequently asked questions

What are the primary functional differences between the ADM489ARZ and the ADM4851AR?

The ADM489ARZ is a low-power, 5 V, single-channel RS-485/RS-422 transceiver with a slew-rate-limited driver and a receiver that includes a fail-safe feature for open inputs. The ADM4851AR is a 3.3 V, half-duplex RS-485/RS-422 transceiver with a high-speed driver and a receiver featuring a full fail-safe design. The key differences are the supply voltage (5 V vs. 3.3 V), the driver slew rate (limited vs. high-speed), and the fail-safe receiver behavior.

Are the ADM489ARZ and ADM4851AR pin-compatible?

No, they are not pin-compatible. The ADM489ARZ is offered in an 8-lead SOIC package with a standard pinout for a full-duplex transceiver (including separate A/B and Y/Z pins). The ADM4851AR is offered in an 8-lead SOIC package with a half-duplex pinout (A/B and DE/RE pins). The pin functions and package footprints differ, so they cannot be interchanged without PCB redesign.

Can the ADM489ARZ and ADM4851AR be used in the same RS-485 network?

Yes, both devices are RS-485/RS-422 compliant and can coexist on the same bus, provided the network is designed for the common supply voltage and signal levels. However, the ADM489ARZ operates from a 5 V supply, while the ADM4851AR operates from a 3.3 V supply. The bus drivers must be compatible with the shared bus voltage and the receivers must tolerate the common-mode range. Proper termination and biasing must be applied per the RS-485 standard.

What are the maximum data rates for the ADM489ARZ and ADM4851AR?

The ADM489ARZ is a slew-rate-limited device with a maximum data rate of 250 kbps. The ADM4851AR is a high-speed device with a maximum data rate of 20 Mbps. The data rate difference is due to the driver slew-rate design: the ADM489ARZ limits slew rate to reduce EMI, while the ADM4851AR is optimized for high-speed communication.

What is the supply voltage range for each device?

The ADM489ARZ operates from a single 5 V ±5% supply (4.75 V to 5.25 V). The ADM4851AR operates from a single 3.3 V ±10% supply (3.0 V to 3.6 V). The supply voltage difference is a critical factor when selecting a replacement or designing a shared bus.

Do both devices feature fail-safe receiver operation?

Yes, both devices include fail-safe receiver features, but the implementation differs. The ADM489ARZ has a fail-safe feature that guarantees a logic-high receiver output when the receiver inputs are open or shorted. The ADM4851AR features a full fail-safe design that guarantees a logic-high receiver output when the receiver inputs are open, shorted, or terminated but undriven. The ADM4851AR's full fail-safe is more robust for bus idle conditions.

What are the operating temperature ranges for the ADM489ARZ and ADM4851AR?

Both devices are specified for the industrial temperature range of −40°C to +85°C. This is a common specification for RS-485 transceivers used in industrial and commercial applications. Always verify the exact temperature grade from the manufacturer's datasheet for the specific orderable part number.

Which device is better suited for low-power or battery-operated applications?

The ADM4851AR is generally better suited for low-power or battery-operated applications because it operates from a 3.3 V supply, which reduces power consumption compared to a 5 V supply. Additionally, the ADM4851AR features a low-power shutdown mode. The ADM489ARZ, while also low-power, operates at 5 V and may consume more power. Designers should compare the quiescent supply current and shutdown current from the respective datasheets for the specific operating conditions.