ADS7816U
Texas Instruments
- Lifecycle
- Active
- Stock
- 6722 Stückzahl
- Package
- SOIC-8
- Series
- Datenerfassung mit Analog to Digital Converters (ADC)
Dieser detaillierte Vergleich von ADS7816U und ADS7817U/2K5 bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.
Replacement verdict
The ADS7817U/2K5 is a functionally compatible replacement candidate for the ADS7816U, sharing the same 12-bit SAR architecture, serial interface, and SOIC-8 footprint, though the ADS7817 offers a higher sampling rate and a differential input configuration that requires validation against the original single-ended signal chain.
Texas Instruments
Texas Instruments
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS7816U | ADS7817U/2K5 | Why it matters |
|---|---|---|---|
| Resolution | 12 bit | 12 bit | Both are 12-bit SAR ADCs, so resolution is identical and not a differentiator for substitutability. |
| Sampling Rate | 200 kSPS | 200 kSPS | Identical maximum throughput means either part can meet the same acquisition timing requirements. |
| Input Type | Single-ended | Differential | Single-ended vs differential input fundamentally changes signal conditioning and wiring; this is the key functional difference between the two parts. |
| Number of Input Channels | 1 | 1 (differential pair) | Both convert one channel, but the differential part uses two input pins, affecting board layout and source driving. |
| Supply Voltage | 2.7 V to 5.25 V | 2.7 V to 5.25 V | Identical supply range allows either device to operate from the same rail in a given design. |
| Interface | SPI-compatible serial | SPI-compatible serial | Same serial interface means the digital host connection and firmware protocol are interchangeable. |
| Package | SOIC-8 | SOIC-8 | Identical package and pin count allow drop-in PCB footprint compatibility. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Same industrial temperature range means both suit the same environmental conditions. |
| Reference Input | External | External | Both require an external reference, so the reference circuit design carries over between the two parts. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS7816U | ADS7817U/2K5 |
|---|---|---|
| Supplier | - | Texas Instruments,Rochester Electronics, LLC |
| Part Status | Active | Obsolete |
| Number of Bits | 12 | 12 |
| Sampling Rate(Per Second) | 200k | 200k |
| Number of Inputs | 1 | 1 |
| Input Type | Differential | Differential |
| Data Interface | SPI | SPI |
| Configuration | S/H-ADC | S/H-ADC |
| Ratio - S / H: ADC | 1:1 | 1:1 |
| Number of A/D Converters | 1 | 1 |
| Architecture | SAR | SAR |
| Reference Type | External | External |
| Voltage - Supply, Analog | 5V | 5V |
| Voltage - Supply, Digital | 5V | 5V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
The ADS7816U is a 12-bit, 200-kSPS micropower sampling analog-to-digital converter with a pseudo-differential input, while the ADS7817U/2K5 is a 12-bit, 200-kSPS micropower sampling ADC with a fully differential input. Both are pin-compatible 8-pin SOIC devices from Texas Instruments, but the ADS7817U/2K5 is supplied in a 2,500-unit tape-and-reel package (the "2K5" suffix), whereas the ADS7816U is typically ordered in tube or standard reel quantities.
Yes. Both devices are offered in an 8-pin SOIC (D) package with the same pinout: VREF, +IN, -IN, GND, CS/SHDN, DOUT, DCLOCK, and VDD. This allows the ADS7817U/2K5 to be used on a PCB designed for the ADS7816U, provided the input configuration (pseudo-differential vs. fully differential) is compatible with the application.
The ADS7816U features a pseudo-differential input, where the negative input (-IN) is typically tied to a fixed reference or ground and the positive input (+IN) is measured relative to it. The ADS7817U/2K5 features a fully differential input, allowing both +IN and -IN to swing independently, which provides better common-mode noise rejection and improved performance in noisy environments.
Yes. Both the ADS7816U and ADS7817U/2K5 are 12-bit successive-approximation ADCs with a maximum sampling rate of 200 kSPS. They share the same serial interface (CS/SHDN, DCLOCK, DOUT) and comparable micropower operation, making them suitable for similar low-power data acquisition applications.
The "2K5" suffix indicates the packaging quantity and form: the device is supplied in tape-and-reel format with 2,500 units per reel. This is intended for high-volume automated assembly. The ADS7816U is commonly available in tube or standard reel packaging, so the suffix reflects ordering/packaging differences rather than electrical or functional differences.
Because the two devices are pin-compatible and share the same package and serial interface, a direct replacement is possible only if the input configuration is validated. The ADS7817U/2K5's fully differential input requires that both +IN and -IN be driven appropriately; if the existing design ties -IN to a fixed potential for the ADS7816U's pseudo-differential input, the circuit must be reviewed to ensure the fully differential input is properly biased and driven.
Yes. Both the ADS7816U and ADS7817U/2K5 are Texas Instruments products and are listed by authorized distributors such as DigiKey, Mouser, and TTI. Designers should confirm current availability, packaging, and lead time directly with the distributor or the official TI datasheet before ordering.