ADS7843E/2K5 vs ADS7841EG4

Dieser detaillierte Vergleich von ADS7843E/2K5 und ADS7841EG4 bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The ADS7843E/2K5 and ADS7841EG4 are not drop-in replacements for one another. Although both are 12-bit touch-screen controller ADCs from Texas Instruments in a 16-pin SSOP package, they differ in resolution architecture, interface protocol, channel configuration, and supply voltage range, so the ADS7841EG4 cannot be substituted directly for the ADS7843E/2K5 without circuit and firmware redesign.

Different interface protocol Different channel configuration Different supply voltage range Different conversion architecture

Parts at a glance

Part A

ADS7843E/2K5

Texas Instruments

Lifecycle
Active
Stock
2859 Stückzahl
Package
SSOP-16
Series
Datenerfassung mit Touchscreen Controllern
Part B

ADS7841EG4

Texas Instruments

Lifecycle
Active
Stock
8773 Stückzahl
Package
SSOP-16
Series
Datenerfassung mit Analog to Digital Converters (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS7843E/2K5 ADS7841EG4 Why it matters
Resolution (bits) 12 12 Both are 12-bit SAR ADCs, so conversion resolution is equivalent for touch or signal digitization.
Number of input channels 4 (single-ended/differential touch configuration) 4 (single-ended) Channel configuration affects whether the device can directly interface with a 4-wire resistive touchscreen versus general single-ended analog inputs.
Interface type SPI-compatible serial (12-bit) SPI-compatible serial Serial interface compatibility determines ease of connection to microcontrollers and system bus architecture.
Supply voltage range 2.7 V to 5.25 V 2.7 V to 5.25 V Matching supply ranges allow either part to operate in the same low-voltage or 5 V system rails.
Internal reference Yes (internal 2.5 V reference) Yes (internal 2.5 V reference) An internal reference simplifies design by removing the need for an external precision voltage reference.
Package type TSSOP-16 TSSOP-16 Identical package and pin count support drop-in PCB compatibility between the two parts.
Operating temperature range -40 °C to +85 °C -40 °C to +85 °C Equivalent temperature ratings ensure both parts suit the same industrial and commercial environments.
Typical application focus Resistive touchscreen controller General-purpose 12-bit ADC The ADS7843 is optimized for touchscreen digitizing (with pen-interrupt and touch detection), while the ADS7841 is a general-purpose ADC, affecting functional substitutability.
Throughput / conversion rate Up to 125 kSPS Up to 200 kSPS Higher throughput in the ADS7841 allows faster sampling, which may matter for higher-speed signal acquisition needs.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS7843E/2K5 ADS7841EG4
Supplier - Texas Instruments
Part Status Active Discontinued at Digi-Key
Number of Bits - 12
Sampling Rate(Per Second) - 200k
Number of Inputs - 4
Input Type - Single Ended
Data Interface - SPI
Configuration - MUX-S/H-ADC
Ratio - S / H: ADC - 1:1
Number of A/D Converters - 1
Architecture - SAR
Reference Type - External
Voltage - Supply, Analog - 2.7V ~ 3.6V, 5V
Voltage - Supply, Digital - 2.7V ~ 3.6V, 5V
Operating Temperature -40°C ~ 85°C -40°C ~ 125°C
Touchscreen 4 Wire Resistive -
Resolution(Bits) 12 b -
Interface Serial -
Voltage Reference External -
Voltage - Supply 2.7V ~ 5V -
Supply Current 2.5 µA -
Mounting Type Surface Mount -

Frequently asked questions

What are the primary functional differences between the ADS7843E/2K5 and the ADS7841EG4?

The ADS7843E/2K5 is a 4-wire resistive touch screen controller with an integrated 12-bit ADC, while the ADS7841EG4 is a standalone 12-bit, 4-channel successive-approximation ADC. The ADS7843E/2K5 includes on-chip touch screen drivers and a pen-interrupt output, whereas the ADS7841EG4 provides a general-purpose 4-channel analog input multiplexer without touch screen control logic.

Are the ADS7843E/2K5 and ADS7841EG4 pin-compatible?

No. The ADS7843E/2K5 is supplied in a 16-pin SSOP package, and the ADS7841EG4 is supplied in a 16-pin SOIC (wide-body) package. The package types and pin functions differ, so they are not drop-in replacements for each other.

Do both devices use the same serial interface?

Both devices use a serial interface, but the protocols differ. The ADS7843E/2K5 uses a 3-wire SPI-compatible interface with a dedicated BUSY output and pen-interrupt signal. The ADS7841EG4 uses a standard 4-wire SPI-compatible interface (CS, DIN, DOUT, DCLK) without touch screen control signals.

What are the resolution and sampling specifications of each device?

Both devices provide 12-bit resolution. The ADS7843E/2K5 supports a throughput rate up to 125 kSPS. The ADS7841EG4 supports a throughput rate up to 200 kSPS. These figures should be confirmed against the respective manufacturer datasheets for the exact grade and test conditions.

Can the ADS7841EG4 be used as a direct substitute for the ADS7843E/2K5 in a touch screen design?

No. The ADS7841EG4 lacks the integrated touch screen drivers, pen-interrupt output, and touch-specific control logic present in the ADS7843E/2K5. A touch screen design requiring those features cannot use the ADS7841EG4 as a direct substitute without additional external circuitry and firmware changes.

What are the supply voltage requirements for these two devices?

The ADS7843E/2K5 operates from a single supply of 2.7 V to 5.25 V. The ADS7841EG4 operates from a single supply of 2.7 V to 5.25 V. Both devices support low-voltage operation, but the analog input range and reference configuration should be verified per datasheet for each part.

Which device is better suited for general-purpose analog signal acquisition?

The ADS7841EG4 is better suited for general-purpose 4-channel analog signal acquisition because it provides a standard 4-channel input multiplexer and a 200 kSPS throughput rate without touch screen-specific overhead. The ADS7843E/2K5 is optimized specifically for 4-wire resistive touch screen digitizing applications.