ADS7844N vs ADS7841E/2K5G4

Dieser detaillierte Vergleich von ADS7844N und ADS7841E/2K5G4 bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADS7841E/2K5G4 is a functional replacement candidate for the ADS7844N in many applications, sharing the same 12-bit SAR architecture, SPI-compatible serial interface, and single 2.7 V to 5 V supply. However, the ADS7844N provides four input channels versus the single channel of the ADS7841E/2K5G4, and the two devices use different package types, so the replacement is only valid where single-channel conversion and the alternate footprint are acceptable. Designers should validate channel count requirements and board layout before substituting.

Channel Count Validation required
Resolution High match
Interface Type High match
Package Type Validation required

Parts at a glance

Part A

ADS7844N

Texas Instruments

Lifecycle
Active
Stock
1495 Stückzahl
Package
SSOP-20
Series
Datenerfassung mit Analog to Digital Converters (ADC)
Part B

ADS7841E/2K5G4

Texas Instruments

Lifecycle
Active
Stock
5974 Stückzahl
Package
SSOP-16
Series
Datenerfassung mit Analog to Digital Converters (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS7844N ADS7841E/2K5G4 Why it matters
Number of Input Channels 8 (single-ended) / 4 (differential) 4 (single-ended) / 2 (differential) Determines how many analog signals can be digitized; the ADS7844N supports twice as many channels, which is critical for multi-sensor applications.
Resolution 12 bit 12 bit Both provide 12-bit resolution, so measurement precision is equivalent and they are interchangeable in this respect.
Sampling Rate 200 kSPS 200 kSPS Identical maximum throughput means both can handle the same signal bandwidth and timing requirements.
Supply Voltage 2.7 V to 5.25 V 2.7 V to 5.25 V Same supply range allows either part to operate from common 3.3 V or 5 V rails without redesign.
Interface Type SPI / QSPI / Microwire (serial) SPI / QSPI / Microwire (serial) Matching serial interfaces ensure the same microcontroller or DSP can drive either device with no firmware changes.
Package / Pin Count 20-pin SSOP (DBQ) 16-pin SSOP (DBQ) Different pin counts and footprints mean the PCB layout must be redesigned; they are not drop-in replacements.
Input Type Single-ended and differential Single-ended and differential Both support differential inputs, which improves noise rejection for low-level signals.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Identical industrial temperature range means both are suitable for the same environmental conditions.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS7844N ADS7841E/2K5G4
Supplier - Texas Instruments
Part Status Active Obsolete
Number of Bits 12 12
Sampling Rate(Per Second) 200k 200k
Number of Inputs 4, 8 4
Input Type Differential, Single Ended Single Ended
Data Interface SPI SPI
Configuration MUX-S/H-ADC MUX-S/H-ADC
Ratio - S / H: ADC 1:1 1:1
Number of A/D Converters 1 1
Architecture SAR SAR
Reference Type External External
Voltage - Supply, Analog 2.7V ~ 3.6V, 5V 2.7V ~ 3.6V, 5V
Voltage - Supply, Digital 2.7V ~ 3.6V, 5V 2.7V ~ 3.6V, 5V
Operating Temperature -40°C ~ 85°C -40°C ~ 125°C

Frequently asked questions

What are the key architectural differences between the ADS7844N and the ADS7841E/2K5G4?

The ADS7844N is an 8-channel, 12-bit successive-approximation ADC with a serial interface, housed in a 20-pin PDIP package. The ADS7841E/2K5G4 is a 4-channel, 12-bit successive-approximation ADC in a 16-pin SSOP package, supplied in tape-and-reel form (2K5). The ADS7844N provides twice the input channel count of the ADS7841E/2K5G4.

Are the ADS7844N and ADS7841E/2K5G4 pin-compatible?

No. The ADS7844N uses a 20-pin PDIP package, while the ADS7841E/2K5G4 uses a 16-pin SSOP package. The differing pin counts and package footprints prevent direct pin-to-pin substitution without a PCB redesign.

Do both devices share the same resolution and sampling architecture?

Yes. Both are 12-bit successive-approximation register (SAR) ADCs. Both devices operate from a single 2.7 V to 5.25 V supply and feature a serial SPI/QSPI-compatible interface, making them suitable for similar precision measurement applications within their respective channel counts.

How do the input channel configurations differ between the two parts?

The ADS7844N offers 8 input channels that can be configured as single-ended or differential pairs. The ADS7841E/2K5G4 offers 4 input channels, also configurable as single-ended or differential. Designs requiring more than four analog inputs must use the ADS7844N or an external multiplexer.

Can the ADS7841E/2K5G4 be used as a drop-in replacement for the ADS7844N in an existing design?

No. Beyond the package and pin-count differences, the channel count differs (4 vs. 8). A drop-in replacement is not possible; the design would require a new PCB layout and verification that four channels satisfy the system requirements.

What are the supply voltage and reference requirements for these ADCs?

Both the ADS7844N and ADS7841E/2K5G4 operate from a single supply in the 2.7 V to 5.25 V range. Both support an external reference voltage (VREF) that sets the full-scale input range, and both feature a shutdown mode to reduce power consumption between conversions.

Which device is better suited for higher channel-count data acquisition systems?

The ADS7844N is better suited for higher channel-count systems because it provides 8 input channels versus 4 on the ADS7841E/2K5G4. For compact designs with four or fewer analog inputs, the ADS7841E/2K5G4 offers a smaller 16-pin SSOP footprint and tape-and-reel packaging for automated assembly.