ADS7844N
Texas Instruments
- Lifecycle
- Active
- Stock
- 1495 Stückzahl
- Package
- SSOP-20
- Series
- Datenerfassung mit Analog to Digital Converters (ADC)
Dieser detaillierte Vergleich von ADS7844N und ADS7841ESG4 bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.
Replacement verdict
The ADS7841ESG4 is a functional replacement candidate for the ADS7844N, sharing the same 12-bit SAR architecture, 4-channel input multiplexer, and 200 kSPS throughput, but it requires validation of the serial interface configuration and package footprint before substitution.
Texas Instruments
Texas Instruments
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS7844N | ADS7841ESG4 | Why it matters |
|---|---|---|---|
| Number of Input Channels | 8 (single-ended) / 4 (differential) | 4 (single-ended) / 2 (differential) | Determines how many analog signals can be digitized; the ADS7844N supports twice as many channels, so it is not a drop-in substitute where 8 channels are required. |
| Resolution | 12 bits | 12 bits | Both provide the same quantization level, so measurement precision is equivalent. |
| Sampling Rate | 200 kSPS | 200 kSPS | Identical throughput means timing and bandwidth requirements are met by either part. |
| Supply Voltage | 2.7 V to 5.25 V | 2.7 V to 5.25 V | Same operating range allows use in the same 3 V or 5 V systems. |
| Interface Type | SPI-compatible serial | SPI-compatible serial | Both use the same serial protocol, so the host microcontroller interface is compatible. |
| Package | 20-pin SSOP | 16-pin SSOP | Different pin counts and footprints mean the PCB layout must be redesigned; they are not physically interchangeable. |
| Input Type | Single-ended / differential | Single-ended / differential | Both support the same input configurations, preserving signal conditioning flexibility. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Same industrial temperature range suits both parts for the same environmental conditions. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS7844N | ADS7841ESG4 |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Active | Discontinued at Digi-Key |
| Number of Bits | 12 | 12 |
| Sampling Rate(Per Second) | 200k | 200k |
| Number of Inputs | 4, 8 | 4 |
| Input Type | Differential, Single Ended | Single Ended |
| Data Interface | SPI | SPI |
| Configuration | MUX-S/H-ADC | MUX-S/H-ADC |
| Ratio - S / H: ADC | 1:1 | 1:1 |
| Number of A/D Converters | 1 | 1 |
| Architecture | SAR | SAR |
| Reference Type | External | External |
| Voltage - Supply, Analog | 2.7V ~ 3.6V, 5V | 2.7V ~ 3.6V, 5V |
| Voltage - Supply, Digital | 2.7V ~ 3.6V, 5V | 2.7V ~ 3.6V, 5V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 125°C |
The ADS7844N is an 8-channel, 12-bit successive-approximation ADC with a serial interface, housed in a 20-pin PDIP package. The ADS7841ESG4 is a 4-channel, 12-bit successive-approximation ADC with a serial interface, supplied in a 16-pin QSOP package. The primary differences are channel count (8 vs 4), package type and pin count, and the resulting PCB footprint.
No. The ADS7844N uses a 20-pin PDIP package, while the ADS7841ESG4 uses a 16-pin QSOP package. The pin counts and package outlines differ, so they are not drop-in replacements and require different PCB land patterns.
Yes. Both are 12-bit successive-approximation ADCs with a serial digital interface, allowing them to be used in comparable microcontroller-based data-acquisition designs where channel count and package constraints permit.
The ADS7844N provides 8 analog input channels, while the ADS7841ESG4 provides 4 analog input channels. Designs requiring more than four single-ended inputs must use the ADS7844N or add external multiplexing.
Not directly. Because the devices differ in channel count (4 vs 8) and package (16-pin QSOP vs 20-pin PDIP), a replacement requires verifying channel requirements, redesigning the PCB footprint, and confirming the serial interface timing against the respective manufacturer datasheets.
The ADS7844N is offered in a 20-pin PDIP (N suffix) package. The ADS7841ESG4 is offered in a 16-pin QSOP (DBQ) package, as indicated by the ESG4 ordering suffix.
The ADS7841ESG4 is the appropriate choice when four analog input channels are sufficient, since its 16-pin QSOP package occupies less board area than the 20-pin PDIP of the ADS7844N. Final selection should be confirmed against the manufacturer datasheet for supply voltage, reference, and timing requirements.